[Sat Jun 22 08:59:20 2013] Detection parameters:
  Position = (325.3, 220.0) = 20 11 8.99 -36 13 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3234.1 +/- 65.7
  Background counts = 13.9
  Rate = 0.5 +/- 0.01

[Sat Jun 22 08:59:21 2013] Off-axis axis estimate = 6.01'
[Sat Jun 22 09:01:27 2013] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:01:27 2013] Initial guess for spatial extent in simple fitting = 9.43"
[Sat Jun 22 09:01:27 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.053
[Sat Jun 22 09:01:27 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.43"
[Sat Jun 22 09:32:15 2013] fullrun_pn_xmm0670380401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 22 09:32:15 2013] fullrun_pn_xmm0670380401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 22 09:32:15 2013] Fit fullrun_pn_xmm0670380401_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Jun 22 09:32:15 2013] fullrun_pn_xmm0670380401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 22 09:32:15 2013] fullrun_pn_xmm0670380401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 22 09:32:15 2013] Fit fullrun_pn_xmm0670380401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 22 10:15:37 2013] Spatial fit model total counts = 3348.890000, observed total counts = 3129.000000
[Sat Jun 22 10:15:37 2013] Offset between fit and detection position for source 1 = 0.059933 pixels
[Sat Jun 22 10:15:37 2013] 3379.686000 total counts/ 853.776000 bgd. counts: snr = 86.446199
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.059933 pixels
  Position = (325.2, 220.0) = 20 11 9.01 -36 13 13.3
  Extent = 6.3 (6.0-6.6)" x 5.5 (5.2-5.7)", rotation angle = 360 (346-12) degrees
  Source counts = 2525.9 +/- 58.1
  Background counts = 853.8
  Rate = 0.2 +/- 0.005
[Sat Jun 22 10:15:37 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 10:15:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 10:15:37 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 10:15:37 2013] Source does appear to be extended
[Sat Jun 22 10:15:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04
[Sat Jun 22 10:15:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 10:15:56 2013] Initial guess for spatial extent in simple fitting = 5.86"
[Sat Jun 22 10:15:56 2013] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.173
[Sat Jun 22 10:15:56 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.86"
[Sat Jun 22 10:39:43 2013] fullrun_pn_xmm0670380401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 22 10:39:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670380401_pi300-10000_cl_pass1_src1.csv
[Sat Jun 22 10:39:43 2013] fullrun_pn_xmm0670380401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 22 10:39:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670380401_pi300-10000_cl_pass1_src1.csv
[Sat Jun 22 10:39:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670380401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670380401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 10:39:43 2013] fullrun_pn_xmm0670380401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 22 10:39:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670380401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 22 10:39:43 2013] fullrun_pn_xmm0670380401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 22 10:39:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670380401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 22 10:39:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670380401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670380401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 11:16:45 2013] Warning, spatial fit 1 centroid is now closest to src. 13
[Sat Jun 22 11:16:45 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 11:16:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 11:16:45 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 11:16:45 2013] Source does appear to be extended
[Sat Jun 22 11:16:45 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04
[Sat Jun 22 11:17:02 2013] Counts = 2525.910000, rescaling region sizes by 2.000000
[Sat Jun 22 11:17:02 2013] XMMSAS src. selection expression = ellipse(28246.166000, 19090.987800, 750.844822, 655.351219, 359.634741, X, Y)
[Sat Jun 22 11:17:02 2013] Writing source region out to fullrun_pn_xmm0670380401_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 22 11:17:02 2013] Extracting stamp from image fullrun_pn_xmm0670380401_pi300-10000_cl_sm2.00.img.gz, (282, 177) - (368, 263)
[Sat Jun 22 11:17:02 2013] XMMSAS bgd. selection expression = annulus(28246.166000, 19090.987800, 2502.816072, 5005.632144, X, Y) && !ellipse(23952.338840, 17633.781600, 498.588814, 498.588814, 0.000000, X, Y) && !ellipse(28697.701400, 22464.420200, 463.929613, 205.877606, 13.926711, X, Y)
[Sat Jun 22 11:17:02 2013] Writing fullrun_pn_xmm0670380401_pi300-10000_pass1_cl_src1.gif
[Sat Jun 22 11:17:12 2013] Mean detx,y = (2738.94, 7590.38) 
[Sat Jun 22 11:17:18 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 11:19:14 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 11:19:15 2013] Setting source spectrum file to fullrun_pn_xmm0670380401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 22 11:19:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0670380401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 22 12:11:24 2013] Updating aperture counts using extracted products
[Sat Jun 22 12:11:24 2013] Total counts from fullrun_pn_xmm0670380401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 3038.00
[Sat Jun 22 12:11:25 2013] Total counts from fullrun_pn_xmm0670380401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 3545.00
[Sat Jun 22 12:11:25 2013] Got source and background scale factors 1310211.000000, 52752876.000000
[Sat Jun 22 12:11:25 2013] User source parameters:
  Position = (325.2, 220.0) = 20 11 9.01 -36 13 13.3
  Extent = 6.3 (6.0-6.6)" x 5.5 (5.2-5.7)", rotation angle = 360 (346-12) degrees
  Source aperture counts = 2950.0 +/- 56.1
  Background aperture counts = 88.0
  Rate = 0.3 +/- 0.005

[Sat Jun 22 12:11:30 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 12:11:30 2013] Using photon index=1.80, rate=0.226, arf fullrun_pn_xmm0670380401_pi300-10000_pass1_cl_src1.arf
[Sat Jun 22 12:11:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 12:11:30 2013] Updating source flux to 1.3e-12
[Sat Jun 22 12:11:47 2013] xmm0670380401/analysis//spectral/fullrun_pn_xmm0670380401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete