[Sat Jun 22 09:00:04 2013] Detection parameters:
  Position = (147.6, 228.3) = 20 12 12.86 -36 12 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.7 +/- 6.5
  Background counts = 3.5
  Rate = 0.002 +/- 0.0005

[Sat Jun 22 09:00:04 2013] Off-axis axis estimate = 12.06'
[Sat Jun 22 09:49:07 2013] Using EEF radius (= 12.46 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:49:07 2013] Initial guess for spatial extent in simple fitting = 12.46"
[Sat Jun 22 09:49:07 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.082
[Sat Jun 22 09:49:07 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 12.46"
[Sat Jun 22 10:15:31 2013] fullrun_mos2_xmm0670380401_pi300-10000_cl_pass0_src13.ximg exists
[Sat Jun 22 10:15:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670380401_pi300-10000_cl_pass0_src13.csv
[Sat Jun 22 10:15:31 2013] fullrun_mos2_xmm0670380401_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Jun 22 10:15:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670380401_pi300-10000_cl_pass0_src13.csv
[Sat Jun 22 10:15:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670380401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670380401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 10:15:31 2013] fullrun_mos2_xmm0670380401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Jun 22 10:15:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670380401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat Jun 22 10:15:31 2013] fullrun_mos2_xmm0670380401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Jun 22 10:15:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670380401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat Jun 22 10:15:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670380401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670380401_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 10:15:45 2013] Spatial fit model total counts = 53.075800, observed total counts = 47.000000
[Sat Jun 22 10:15:45 2013] Offset between fit and detection position for source 12 = 0.255397 pixels
[Sat Jun 22 10:15:45 2013] 53.563000 total counts/ 40.772400 bgd. counts: snr = 2.003124
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.255397 pixels
  Position = (147.7, 228.1) = 20 12 12.81 -36 12 37.5
  Extent = 3.1" x 3.1", rotation angle = 0
  Source counts = 12.8 +/- 7.3
  Background counts = 40.8
  Rate = 0.001 +/- 0.0005
[Sat Jun 22 10:15:45 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 10:15:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 10:15:45 2013] Assessing source extent using major
[Sat Jun 22 10:15:45 2013] Source does appear to be extended
[Sat Jun 22 10:15:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 10:15:45 2013] Deleting source due to low Poisson probability 0.9