[Tue May 21 03:20:17 2013] Detection parameters:
  Position = (246.8, 401.0) = 16 58 16.67 28 0 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.2 +/- 9.9
  Background counts = 11.6
  Rate = 0.005 +/- 0.001

[Tue May 21 03:20:17 2013] Off-axis axis estimate = 8.32'
[Tue May 21 05:01:55 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Tue May 21 05:01:55 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Tue May 21 05:01:55 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.045
[Tue May 21 05:01:55 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 10.59"
[Tue May 21 05:36:34 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_src8.ximg exists
[Tue May 21 05:36:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_src8.csv
[Tue May 21 05:36:34 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue May 21 05:36:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_src8.csv
[Tue May 21 05:36:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 05:36:34 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue May 21 05:36:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue May 21 05:36:34 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue May 21 05:36:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue May 21 05:36:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 05:36:48 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 10.599106 pixels away
[Tue May 21 05:36:48 2013] Vigneting correction estimate = 1.000000
[Tue May 21 05:36:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 05:36:48 2013] Assessing source extent using major
[Tue May 21 05:36:48 2013] Source does appear to be extended
[Tue May 21 05:36:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 06:41:33 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Tue May 21 06:41:33 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 21 06:41:33 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Tue May 21 06:41:33 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.045
[Tue May 21 06:41:33 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 10.59"
[Tue May 21 07:05:49 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_src8.ximg exists
[Tue May 21 07:05:49 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue May 21 07:05:49 2013] Fit fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_src8 appears to have run properly
[Tue May 21 07:05:49 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue May 21 07:05:49 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue May 21 07:05:49 2013] Fit fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue May 21 07:06:06 2013] Spatial fit model total counts = 127.369000, observed total counts = 127.000000
[Tue May 21 07:06:06 2013] Offset between fit and detection position for source 18 = 0.349596 pixels
[Tue May 21 07:06:06 2013] 126.173100 total counts/ 89.405600 bgd. counts: snr = 3.888497
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.349596 pixels
  Position = (246.4, 401.0) = 16 58 16.79 28 0 41.9
  Extent = 7.2 (4.5-11.2)" x 3.1 (2.6-4.9)", rotation angle = 314 (299-334) degrees
  Source counts = 36.8 +/- 11.2
  Background counts = 89.4
  Rate = 0.002 +/- 0.0007
[Tue May 21 07:06:06 2013] Vigneting correction estimate = 1.000000
[Tue May 21 07:06:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 07:06:06 2013] Assessing source extent using major axis lower bound
[Tue May 21 07:06:06 2013] Source does appear to be extended
[Tue May 21 07:06:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.92
[Tue May 21 07:57:12 2013] XMMSAS src. selection expression = ellipse(21391.937400, 34838.828000, 431.176212, 184.603805, 314.051025, X, Y)
[Tue May 21 07:57:12 2013] Writing source region out to fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src18_src.reg
[Tue May 21 07:57:12 2013] Extracting stamp from image fullrun_mos2_xmm0670350701_pi300-10000_cl_sm2.00.img.gz, (222, 376) - (271, 426)
[Tue May 21 07:57:12 2013] XMMSAS bgd. selection expression = annulus(21391.937400, 34838.828000, 718.627021, 1437.254041, X, Y)
[Tue May 21 07:57:12 2013] Writing fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src18.gif
[Tue May 21 07:59:08 2013] Mean detx,y = (-842.82, -11407.23) 
[Tue May 21 07:59:10 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 07:59:23 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 07:59:23 2013] Setting source spectrum file to fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue May 21 07:59:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue May 21 08:07:39 2013] Not generating rmf since there are only 36 counts
[Tue May 21 08:07:39 2013] rmf not generated due to insufficient counts
[Tue May 21 08:18:34 2013] Updating aperture counts using extracted products
[Tue May 21 08:18:34 2013] Total counts from fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 44.00
[Tue May 21 08:18:34 2013] Total counts from fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src18_bgd.pi.gz = 218.00
[Tue May 21 08:18:34 2013] Got source and background scale factors 251200.000000, 4473737.000000
[Tue May 21 08:18:34 2013] User source parameters:
  Position = (246.4, 401.0) = 16 58 16.79 28 0 41.9
  Extent = 7.2 (4.5-11.2)" x 3.1 (2.6-4.9)", rotation angle = 314 (299-334) degrees
  Source aperture counts = 31.8 +/- 7.7
  Background aperture counts = 12.2
  Rate = 0.002 +/- 0.0005

[Tue May 21 08:18:37 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 08:18:37 2013] Using photon index=1.80, rate=0.00237, arf fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src18.arf
[Tue May 21 08:18:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 08:18:37 2013] Updating source flux to 6.7e-14
[Tue May 21 08:18:41 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 21 08:18:44 2013] xmm0670350701/analysis//spectral/fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete