[Tue May 21 03:20:17 2013] Detection parameters:
  Position = (311.4, 265.1) = 16 57 55.45 27 50 50.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.7 +/- 11.8
  Background counts = 28.8
  Rate = 0.003 +/- 0.0008

[Tue May 21 03:20:17 2013] Off-axis axis estimate = 2.59'
[Tue May 21 05:01:55 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Tue May 21 05:01:55 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Tue May 21 05:01:55 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965
[Tue May 21 05:01:55 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 7.72"
[Tue May 21 05:36:34 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_src15.ximg exists
[Tue May 21 05:36:34 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue May 21 05:36:34 2013] Fit fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_src15 appears to have run properly
[Tue May 21 05:36:34 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue May 21 05:36:34 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue May 21 05:36:34 2013] Fit fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue May 21 05:36:48 2013] Spatial fit model total counts = 702.285000, observed total counts = 661.000000
[Tue May 21 05:36:48 2013] Offset between fit and detection position for source 14 = 7.594062 pixels
[Tue May 21 05:36:48 2013] 711.976000 total counts/ 585.609000 bgd. counts: snr = 5.221915
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 7.594062 pixels
  Position = (315.8, 258.9) = 16 57 54.03 27 50 23.8
  Extent = 15.4 (15.4-30.9)", rotation angle = 0
  Source counts = 126.4 +/- 26.7
  Background counts = 585.6
  Rate = 0.008 +/- 0.002
[Tue May 21 05:36:48 2013] Vigneting correction estimate = 1.000000
[Tue May 21 05:36:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 05:36:48 2013] Assessing source extent using major axis lower bound
[Tue May 21 05:36:48 2013] Source does appear to be extended
[Tue May 21 05:36:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 06:41:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 06:41:33 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 21 06:41:33 2013] Initial guess for spatial extent in simple fitting = 15.45"
[Tue May 21 06:41:33 2013] source mask rpix=3.6, npix_max = 65, mask sum = 49, frac = 0.746
[Tue May 21 06:41:33 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 15.45"
[Tue May 21 07:05:49 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_src13.ximg exists
[Tue May 21 07:05:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_src13.csv
[Tue May 21 07:05:49 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue May 21 07:05:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_src13.csv
[Tue May 21 07:05:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 07:05:49 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue May 21 07:05:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue May 21 07:05:49 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue May 21 07:05:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue May 21 07:05:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 07:06:06 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 20.339001 pixels away
[Tue May 21 07:06:06 2013] Vigneting correction estimate = 1.000000
[Tue May 21 07:06:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 07:06:06 2013] Assessing source extent using major axis lower bound
[Tue May 21 07:06:06 2013] Source does appear to be extended
[Tue May 21 07:06:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 07:57:12 2013] XMMSAS src. selection expression = ellipse(27422.976000, 22475.544000, 926.934027, 926.934027, 0.000000, X, Y)
[Tue May 21 07:57:12 2013] Writing source region out to fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src14_src.reg
[Tue May 21 07:57:12 2013] Extracting stamp from image fullrun_mos2_xmm0670350701_pi300-10000_cl_sm2.00.img.gz, (262, 206) - (369, 312)
[Tue May 21 07:57:12 2013] XMMSAS bgd. selection expression = annulus(27422.976000, 22475.544000, 1544.890044, 3089.780089, X, Y) && !ellipse(26330.568440, 23513.968600, 635.854418, 635.854418, 0.000000, X, Y) && !ellipse(25536.288910, 20049.653610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28913.733620, 19585.797600, 519.248815, 268.898408, 328.966115, X, Y) && !ellipse(25824.534821, 24566.316437, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 21 07:57:12 2013] Writing fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src14.gif
[Tue May 21 08:00:57 2013] Mean detx,y = (1682.42, 2014.68) 
[Tue May 21 08:00:59 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 08:01:13 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 08:01:14 2013] Setting source spectrum file to fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue May 21 08:01:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue May 21 08:18:36 2013] Updating aperture counts using extracted products
[Tue May 21 08:18:36 2013] Total counts from fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 446.00
[Tue May 21 08:18:36 2013] Total counts from fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src14_bgd.pi.gz = 2092.00
[Tue May 21 08:18:36 2013] Got source and background scale factors 2575632.000000, 18195276.000000
[Tue May 21 08:18:36 2013] User source parameters:
  Position = (315.8, 258.9) = 16 57 54.03 27 50 23.8
  Extent = 15.4 (15.4-30.9)", rotation angle = 0
  Source aperture counts = 149.9 +/- 22.1
  Background aperture counts = 296.1
  Rate = 0.01 +/- 0.001

[Tue May 21 08:18:37 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 08:18:37 2013] Using photon index=1.80, rate=0.00816, arf fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src14.arf
[Tue May 21 08:18:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 08:18:37 2013] Updating source flux to 9.6e-14
[Tue May 21 08:18:44 2013] xmm0670350701/analysis//spectral/fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete