[Tue May 21 03:20:16 2013] Detection parameters:
  Position = (294.1, 231.0) = 16 58 1.14 27 48 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.9 +/- 13.3
  Background counts = 23.3
  Rate = 0.01 +/- 0.001

[Tue May 21 03:20:17 2013] Off-axis axis estimate = 4.90'
[Tue May 21 05:01:55 2013] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Tue May 21 05:01:55 2013] Initial guess for spatial extent in simple fitting = 8.88"
[Tue May 21 05:01:55 2013] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.581
[Tue May 21 05:01:55 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.88"
[Tue May 21 05:36:34 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_src2.ximg exists
[Tue May 21 05:36:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_src2.csv
[Tue May 21 05:36:34 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue May 21 05:36:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_src2.csv
[Tue May 21 05:36:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 05:36:34 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue May 21 05:36:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue May 21 05:36:34 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue May 21 05:36:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue May 21 05:36:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670350701_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 05:36:48 2013] Spatial fit model total counts = 243.224000, observed total counts = 220.000000
[Tue May 21 05:36:48 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 05:36:48 2013] Vigneting correction estimate = 1.000000
[Tue May 21 05:36:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 05:36:48 2013] Assessing source extent using major
[Tue May 21 05:36:48 2013] Source does appear to be extended
[Tue May 21 05:36:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 06:41:33 2013] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Tue May 21 06:41:33 2013] Initial guess for spatial extent in simple fitting = 8.88"
[Tue May 21 06:41:33 2013] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.581
[Tue May 21 06:41:33 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.88"
[Tue May 21 07:05:49 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_src2.ximg exists
[Tue May 21 07:05:49 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue May 21 07:05:49 2013] Fit fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_src2 appears to have run properly
[Tue May 21 07:05:49 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue May 21 07:05:49 2013] fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue May 21 07:05:49 2013] Fit fullrun_mos2_xmm0670350701_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue May 21 07:06:06 2013] Spatial fit model total counts = 242.828000, observed total counts = 220.000000
[Tue May 21 07:06:06 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 07:06:06 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 90.658649 pixels away
[Tue May 21 07:06:06 2013] Vigneting correction estimate = 1.000000
[Tue May 21 07:06:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 07:06:06 2013] Assessing source extent using major
[Tue May 21 07:06:06 2013] Source does appear to be extended
[Tue May 21 07:06:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 07:57:12 2013] XMMSAS src. selection expression = ellipse(25536.288910, 20049.653610, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 21 07:57:12 2013] Writing source region out to fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src1_src.reg
[Tue May 21 07:57:12 2013] Extracting stamp from image fullrun_mos2_xmm0670350701_pi300-10000_cl_sm2.00.img.gz, (257, 194) - (332, 269)
[Tue May 21 07:57:12 2013] XMMSAS bgd. selection expression = annulus(25536.288910, 20049.653610, 1087.500000, 2175.000000, X, Y) && !ellipse(27422.976000, 22475.544000, 1235.912036, 1235.912036, 0.000000, X, Y)
[Tue May 21 07:57:12 2013] Writing fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src1.gif
[Tue May 21 07:57:31 2013] Mean detx,y = (-758.52, 3955.61) 
[Tue May 21 07:57:33 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 07:57:48 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 07:57:48 2013] Setting source spectrum file to fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 21 07:57:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 21 08:07:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 21 08:07:17 2013] rmf not generated due to insufficient counts
[Tue May 21 08:18:32 2013] Updating aperture counts using extracted products
[Tue May 21 08:18:32 2013] Total counts from fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 161.00
[Tue May 21 08:18:33 2013] Total counts from fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src1_bgd.pi.gz = 879.00
[Tue May 21 08:18:33 2013] Got source and background scale factors 1103908.000000, 10247220.000000
[Tue May 21 08:18:33 2013] User source parameters:
  Position = (294.1, 231.0) = 16 58 1.14 27 48 23.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 66.3 +/- 13.7
  Background aperture counts = 94.7
  Rate = 0.004 +/- 0.0009

[Tue May 21 08:18:33 2013] Updating counts from extracted products
[Tue May 21 08:18:33 2013] Set source signif. to 66.31/9.73 = 6.81
[Tue May 21 08:18:37 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 08:18:37 2013] Using photon index=1.80, rate=0.00428, arf fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src1.arf
[Tue May 21 08:18:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 08:18:37 2013] Updating source flux to 6.1e-14
[Tue May 21 08:18:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 08:18:44 2013] xmm0670350701/analysis//spectral/fullrun_mos2_xmm0670350701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete