[Mon Jun 24 18:34:50 2013] Detection parameters:
  Position = (393.9, 253.9) = 16 26 50.28 42 38 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.8 +/- 13.8
  Background counts = 23.7
  Rate = 0.009 +/- 0.001

[Mon Jun 24 18:34:50 2013] Off-axis axis estimate = 7.64'
[Mon Jun 24 18:36:56 2013] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 18:36:56 2013] Initial guess for spatial extent in simple fitting = 10.25"
[Mon Jun 24 18:36:56 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.104
[Mon Jun 24 18:36:56 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 10.25"
[Mon Jun 24 19:54:46 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src42.ximg exists
[Mon Jun 24 19:54:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src42.csv
[Mon Jun 24 19:54:46 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src42_1.ximg exists
[Mon Jun 24 19:54:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src42.csv
[Mon Jun 24 19:54:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 19:54:47 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Mon Jun 24 19:54:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src42.csv
[Mon Jun 24 19:54:47 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Mon Jun 24 19:54:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src42.csv
[Mon Jun 24 19:54:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 21:20:18 2013] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 12.645575 pixels away
[Mon Jun 24 21:20:18 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 21:20:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 21:20:18 2013] Assessing source extent using major
[Mon Jun 24 21:20:18 2013] Source does appear to be extended
[Mon Jun 24 21:20:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 21:20:36 2013] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 21:20:36 2013] Initial guess for spatial extent in simple fitting = 10.25"
[Mon Jun 24 21:20:36 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.104
[Mon Jun 24 21:20:36 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 10.25"
[Mon Jun 24 22:31:21 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src33.ximg exists
[Mon Jun 24 22:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src33.csv
[Mon Jun 24 22:31:21 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src33_1.ximg exists
[Mon Jun 24 22:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src33.csv
[Mon Jun 24 22:31:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 22:31:22 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Mon Jun 24 22:31:22 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src33.csv
[Mon Jun 24 22:31:22 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Mon Jun 24 22:31:22 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src33.csv
[Mon Jun 24 22:31:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 23:54:39 2013] Spatial fit model total counts = -225.184000, observed total counts = 374.000000
[Mon Jun 24 23:54:39 2013] Poor agreement between spatial fit and data for source 43
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 24 23:54:39 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 23:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 23:54:39 2013] Assessing source extent using major
[Mon Jun 24 23:54:39 2013] Source does appear to be extended
[Mon Jun 24 23:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 23:54:57 2013] XMMSAS src. selection expression = ellipse(34224.027985, 22044.171356, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 24 23:54:57 2013] Writing source region out to fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src43_src.reg
[Mon Jun 24 23:54:57 2013] Extracting stamp from image fullrun_pn_xmm0670350501_pi300-10000_cl_sm2.00.img.gz, (356, 216) - (431, 291)
[Mon Jun 24 23:54:57 2013] XMMSAS bgd. selection expression = annulus(34224.027985, 22044.171356, 1087.500000, 2175.000000, X, Y) && !ellipse(35986.838000, 23682.506000, 1010.848029, 654.435219, 111.638000, X, Y) && !ellipse(36828.080719, 20125.392303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35693.732000, 24409.750000, 1719.552049, 1719.552049, 0.000000, X, Y) && !ellipse(37014.939026, 22933.136230, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 24 23:54:57 2013] Writing fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src43.gif
[Tue Jun 25 00:18:22 2013] Mean detx,y = (-1611.76, -7647.77) 
[Tue Jun 25 00:18:25 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 00:18:49 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 00:18:49 2013] Setting source spectrum file to fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Tue Jun 25 00:18:49 2013] Setting bgd. spectrum file to fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Tue Jun 25 02:06:23 2013] Not generating rmf since there are only 98 counts
[Tue Jun 25 02:06:23 2013] rmf not generated due to insufficient counts
[Tue Jun 25 03:22:23 2013] Updating aperture counts using extracted products
[Tue Jun 25 03:22:23 2013] Total counts from fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 300.00
[Tue Jun 25 03:22:23 2013] Total counts from fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src43_bgd.pi.gz = 1224.00
[Tue Jun 25 03:22:23 2013] Got source and background scale factors 1188166.000000, 7299688.000000
[Tue Jun 25 03:22:23 2013] User source parameters:
  Position = (393.9, 253.9) = 16 26 50.28 42 38 58.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 100.8 +/- 18.3
  Background aperture counts = 199.2
  Rate = 0.005 +/- 0.001

[Tue Jun 25 03:22:23 2013] Updating counts from extracted products
[Tue Jun 25 03:22:23 2013] Set source signif. to 100.77/14.11 = 7.14
[Tue Jun 25 03:22:26 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 03:22:26 2013] Using photon index=1.80, rate=0.00533, arf fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src43.arf
[Tue Jun 25 03:22:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 03:22:26 2013] Updating source flux to 2.3e-14
[Tue Jun 25 03:22:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 03:23:05 2013] xmm0670350501/analysis//spectral/fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete