[Mon Jun 24 18:34:49 2013] Detection parameters:
  Position = (308.5, 300.0) = 16 27 23.96 42 42 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.4 +/- 13.6
  Background counts = 41.3
  Rate = 0.004 +/- 0.0009

[Mon Jun 24 18:34:50 2013] Off-axis axis estimate = 0.74'
[Mon Jun 24 18:36:56 2013] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 18:36:56 2013] Initial guess for spatial extent in simple fitting = 6.80"
[Mon Jun 24 18:36:56 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.175
[Mon Jun 24 18:36:56 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 6.80"
[Mon Jun 24 19:54:46 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src25.ximg exists
[Mon Jun 24 19:54:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src25.csv
[Mon Jun 24 19:54:46 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Jun 24 19:54:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src25.csv
[Mon Jun 24 19:54:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 19:54:47 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Jun 24 19:54:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon Jun 24 19:54:47 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Jun 24 19:54:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon Jun 24 19:54:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 21:20:18 2013] Warning, spatial fit 25 centroid is now closest to src. 28
[Mon Jun 24 21:20:18 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 21:20:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 21:20:18 2013] Assessing source extent using major
[Mon Jun 24 21:20:18 2013] Source does appear to be extended
[Mon Jun 24 21:20:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 21:20:36 2013] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 21:20:36 2013] Initial guess for spatial extent in simple fitting = 6.80"
[Mon Jun 24 21:20:36 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.175
[Mon Jun 24 21:20:36 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 6.80"
[Mon Jun 24 22:31:21 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src21.ximg exists
[Mon Jun 24 22:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src21.csv
[Mon Jun 24 22:31:21 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Jun 24 22:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src21.csv
[Mon Jun 24 22:31:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 22:31:22 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Jun 24 22:31:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Jun 24 22:31:22 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Jun 24 22:31:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Jun 24 22:31:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 23:54:39 2013] Spatial fit model total counts = 23.148600, observed total counts = 703.000000
[Mon Jun 24 23:54:39 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 24 23:54:39 2013] Source 26 is offset by 5.044099 and 1.561648 pixels which is larger than
2 X fitted extent = 0.745977 x 0.745977, not incorporating fit results
[Mon Jun 24 23:54:39 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 23:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 23:54:39 2013] Assessing source extent using major
[Mon Jun 24 23:54:39 2013] Source does appear to be extended
[Mon Jun 24 23:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 23:54:57 2013] XMMSAS src. selection expression = ellipse(26792.980652, 26048.303345, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 24 23:54:57 2013] Writing source region out to fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src26_src.reg
[Mon Jun 24 23:54:57 2013] Extracting stamp from image fullrun_pn_xmm0670350501_pi300-10000_cl_sm2.00.img.gz, (271, 262) - (346, 337)
[Mon Jun 24 23:54:57 2013] XMMSAS bgd. selection expression = annulus(26792.980652, 26048.303345, 1087.500000, 2175.000000, X, Y) && !ellipse(26488.260918, 24201.923800, 1055.344030, 926.408027, 22.751316, X, Y) && !ellipse(25876.034424, 25775.100830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24840.803986, 24648.210815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29535.455994, 24739.947388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25053.110000, 23967.346000, 1214.168035, 1214.168035, 0.000000, X, Y) && !ellipse(23853.332000, 23039.976000, 2412.792069, 2412.792069, 0.000000, X, Y)
[Mon Jun 24 23:54:57 2013] Writing fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src26.gif
[Tue Jun 25 00:12:04 2013] Mean detx,y = (-1502.04, 753.65) 
[Tue Jun 25 00:12:06 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 00:12:26 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 00:12:27 2013] Setting source spectrum file to fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Jun 25 00:12:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue Jun 25 00:32:28 2013] Not generating rmf since there are only 61 counts
[Tue Jun 25 00:32:28 2013] rmf not generated due to insufficient counts
[Tue Jun 25 03:22:20 2013] Updating aperture counts using extracted products
[Tue Jun 25 03:22:20 2013] Total counts from fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 500.00
[Tue Jun 25 03:22:21 2013] Total counts from fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src26_bgd.pi.gz = 1751.00
[Tue Jun 25 03:22:21 2013] Got source and background scale factors 1227900.000000, 6371297.000000
[Tue Jun 25 03:22:21 2013] User source parameters:
  Position = (308.5, 300.0) = 16 27 23.96 42 42 20.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 162.5 +/- 23.4
  Background aperture counts = 337.5
  Rate = 0.009 +/- 0.001

[Tue Jun 25 03:22:21 2013] Updating counts from extracted products
[Tue Jun 25 03:22:21 2013] Set source signif. to 162.54/18.37 = 8.85
[Tue Jun 25 03:22:25 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 03:22:25 2013] Using photon index=1.80, rate=0.0086, arf fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src26.arf
[Tue Jun 25 03:22:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 03:22:25 2013] Updating source flux to 2.7e-14
[Tue Jun 25 03:22:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 03:23:05 2013] xmm0670350501/analysis//spectral/fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete