[Mon Jun 24 18:34:49 2013] Detection parameters:
  Position = (153.9, 335.1) = 16 28 25.03 42 44 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.9 +/- 11.6
  Background counts = 24.7
  Rate = 0.003 +/- 0.0006

[Mon Jun 24 18:34:50 2013] Off-axis axis estimate = 10.81'
[Mon Jun 24 18:36:56 2013] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 18:36:56 2013] Initial guess for spatial extent in simple fitting = 11.84"
[Mon Jun 24 18:36:56 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.868
[Mon Jun 24 18:36:56 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 11.84"
[Mon Jun 24 19:54:46 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src23.ximg exists
[Mon Jun 24 19:54:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src23.csv
[Mon Jun 24 19:54:46 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src23_1.ximg exists
[Mon Jun 24 19:54:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src23.csv
[Mon Jun 24 19:54:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 19:54:47 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Mon Jun 24 19:54:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src23.csv
[Mon Jun 24 19:54:47 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Mon Jun 24 19:54:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src23.csv
[Mon Jun 24 19:54:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 21:20:18 2013] Spatial fit model total counts = 354.861000, observed total counts = 345.000000
[Mon Jun 24 21:20:18 2013] Offset between fit and detection position for source 24 = 0.560454 pixels
[Mon Jun 24 21:20:18 2013] Warning, changing simple spatial fit ID from 23 to 5
[Mon Jun 24 21:20:18 2013] 356.133488 total counts/ 355.407000 bgd. counts: snr = 0.038536
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.560454 pixels
  Position = (154.4, 335.4) = 16 28 24.83 42 44 53.3
  Extent = 2.9 (2.9-4.3)", rotation angle = 0
  Source counts = 0.7 +/- 18.9
  Background counts = 355.4
  Rate = 4e-05 +/- 0.001
  Deleting source due to low Poisson probability