[Mon Jun 24 18:34:49 2013] Detection parameters:
  Position = (306.0, 263.1) = 16 27 24.94 42 39 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 253.5 +/- 22.4
  Background counts = 44.7
  Rate = 0.02 +/- 0.001

[Mon Jun 24 18:34:50 2013] Off-axis axis estimate = 2.62'
[Mon Jun 24 18:36:56 2013] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 18:36:56 2013] Initial guess for spatial extent in simple fitting = 7.74"
[Mon Jun 24 18:36:56 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.770
[Mon Jun 24 18:36:56 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 7.74"
[Mon Jun 24 19:54:46 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src9.ximg exists
[Mon Jun 24 19:54:46 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Jun 24 19:54:46 2013] Fit fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_src9 appears to have run properly
[Mon Jun 24 19:54:46 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Jun 24 19:54:46 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Jun 24 19:54:46 2013] Fit fullrun_pn_xmm0670350501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Jun 24 21:20:18 2013] Spatial fit model total counts = 1547.040000, observed total counts = 1415.000000
[Mon Jun 24 21:20:18 2013] Offset between fit and detection position for source 10 = 0.595178 pixels
[Mon Jun 24 21:20:18 2013] 1626.134900 total counts/ 1554.780000 bgd. counts: snr = 1.809628
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.595178 pixels
  Position = (306.1, 262.5) = 16 27 24.92 42 39 37.2
  Extent = 4.8 (3.2-6.5)", rotation angle = 0
  Source counts = 71.4 +/- 40.3
  Background counts = 1554.8
  Rate = 0.004 +/- 0.002
[Mon Jun 24 21:20:18 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 21:20:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 21:20:18 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 21:20:18 2013] Source does appear to be extended
[Mon Jun 24 21:20:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 21:20:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 24 21:20:36 2013] Initial guess for spatial extent in simple fitting = 4.83"
[Mon Jun 24 21:20:36 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.157
[Mon Jun 24 21:20:36 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 4.83"
[Mon Jun 24 22:31:21 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src9.ximg exists
[Mon Jun 24 22:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src9.csv
[Mon Jun 24 22:31:21 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Jun 24 22:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src9.csv
[Mon Jun 24 22:31:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 22:31:21 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Jun 24 22:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src9.csv
[Mon Jun 24 22:31:21 2013] fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Jun 24 22:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src9.csv
[Mon Jun 24 22:31:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670350501_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 23:54:39 2013] Spatial fit model total counts = 1389.520000, observed total counts = 1257.000000
[Mon Jun 24 23:54:39 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 24 23:54:39 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 23:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 23:54:39 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 23:54:39 2013] Source does appear to be extended
[Mon Jun 24 23:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 23:54:56 2013] XMMSAS src. selection expression = ellipse(26581.455980, 22790.521400, 289.716608, 289.716608, 0.000000, X, Y)
[Mon Jun 24 23:54:56 2013] Writing source region out to fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src10_src.reg
[Mon Jun 24 23:54:56 2013] Extracting stamp from image fullrun_pn_xmm0670350501_pi300-10000_cl_sm2.00.img.gz, (289, 246) - (323, 279)
[Mon Jun 24 23:54:56 2013] XMMSAS bgd. selection expression = annulus(26581.455980, 22790.521400, 482.861014, 965.722028, X, Y) && !ellipse(26488.260918, 24201.923800, 1055.344030, 926.408027, 22.751316, X, Y) && !ellipse(25053.110000, 23967.346000, 1214.168035, 1214.168035, 0.000000, X, Y) && !ellipse(23853.332000, 23039.976000, 2412.792069, 2412.792069, 0.000000, X, Y)
[Mon Jun 24 23:54:56 2013] Writing fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src10.gif
[Tue Jun 25 00:07:08 2013] Mean detx,y = (1357.97, -591.36) 
[Tue Jun 25 00:07:10 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 00:07:22 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 00:07:22 2013] Setting source spectrum file to fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun 25 00:07:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Jun 25 00:28:55 2013] Not generating rmf since there are only 71 counts
[Tue Jun 25 00:28:55 2013] rmf not generated due to insufficient counts
[Tue Jun 25 03:22:18 2013] Updating aperture counts using extracted products
[Tue Jun 25 03:22:18 2013] Total counts from fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 251.00
[Tue Jun 25 03:22:18 2013] Total counts from fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src10_bgd.pi.gz = 369.00
[Tue Jun 25 03:22:18 2013] Got source and background scale factors 262400.000000, 813374.000000
[Tue Jun 25 03:22:18 2013] User source parameters:
  Position = (306.1, 262.5) = 16 27 24.92 42 39 37.2
  Extent = 4.8 (3.2-6.5)", rotation angle = 0
  Source aperture counts = 132.0 +/- 16.9
  Background aperture counts = 119.0
  Rate = 0.007 +/- 0.0009

[Tue Jun 25 03:22:25 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 03:22:25 2013] Using photon index=1.80, rate=0.00378, arf fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src10.arf
[Tue Jun 25 03:22:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 03:22:25 2013] Updating source flux to 1.2e-14
[Tue Jun 25 03:22:56 2013] Flag p found in src. 10 procflags, skipping spectral fitting
[Tue Jun 25 03:22:56 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 25 03:23:05 2013] xmm0670350501/analysis//spectral/fullrun_pn_xmm0670350501_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete