[Mon Jun 17 02:00:07 2013] Detection parameters:
  Position = (382.2, 115.6) = 14 56 32.87 24 25 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.8 +/- 13.9
  Background counts = 34.0
  Rate = 0.003 +/- 0.0005

[Mon Jun 17 02:00:07 2013] Off-axis axis estimate = 14.58'
[Mon Jun 17 02:04:25 2013] Using EEF radius (= 13.72 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 02:04:25 2013] Initial guess for spatial extent in simple fitting = 13.72"
[Mon Jun 17 02:04:25 2013] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.917
[Mon Jun 17 02:04:25 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 13.72"
[Mon Jun 17 03:05:16 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src30.ximg exists
[Mon Jun 17 03:05:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src30.csv
[Mon Jun 17 03:05:16 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src30_1.ximg exists
[Mon Jun 17 03:05:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src30.csv
[Mon Jun 17 03:05:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 03:05:16 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Mon Jun 17 03:05:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Mon Jun 17 03:05:16 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Mon Jun 17 03:05:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Mon Jun 17 03:05:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 03:39:14 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 13.778289 pixels away
[Mon Jun 17 03:39:14 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 03:39:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 03:39:14 2013] Assessing source extent using major
[Mon Jun 17 03:39:14 2013] Source does appear to be extended
[Mon Jun 17 03:39:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 03:39:33 2013] Using EEF radius (= 13.72 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 03:39:33 2013] Initial guess for spatial extent in simple fitting = 13.72"
[Mon Jun 17 03:39:33 2013] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.917
[Mon Jun 17 03:39:33 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 13.72"
[Mon Jun 17 04:44:20 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_src29.ximg exists
[Mon Jun 17 04:44:20 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon Jun 17 04:44:20 2013] Fit fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_src29 appears to have run properly
[Mon Jun 17 04:44:20 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon Jun 17 04:44:20 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon Jun 17 04:44:20 2013] Fit fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Mon Jun 17 05:16:31 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 24.195240 pixels away
[Mon Jun 17 05:16:31 2013] Spatial fit model total counts = 324.536000, observed total counts = 299.000000
[Mon Jun 17 05:16:31 2013] Offset between fit and detection position for source 30 = 0.143012 pixels
[Mon Jun 17 05:16:31 2013] 322.311700 total counts/ 274.843000 bgd. counts: snr = 2.863288
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.143012 pixels
  Position = (382.2, 115.7) = 14 56 32.86 24 25 27.7
  Extent = 6.7 (4.5-9.9)" x 3.7 (3.4-5.4)", rotation angle = 355 (321-22) degrees
  Source counts = 47.5 +/- 18.0
  Background counts = 274.8
  Rate = 0.003 +/- 0.001
[Mon Jun 17 05:16:32 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 05:16:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 05:16:32 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 05:16:32 2013] Source does appear to be extended
[Mon Jun 17 05:16:32 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.85
[Mon Jun 17 05:16:51 2013] XMMSAS src. selection expression = ellipse(33205.777400, 10017.434200, 399.955812, 223.926006, 354.789978, X, Y)
[Mon Jun 17 05:16:51 2013] Writing source region out to fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src30_src.reg
[Mon Jun 17 05:16:51 2013] Extracting stamp from image fullrun_pn_xmm0670300101_pi300-10000_cl_sm2.00.img.gz, (359, 93) - (405, 139)
[Mon Jun 17 05:16:51 2013] XMMSAS bgd. selection expression = annulus(33205.777400, 10017.434200, 666.593019, 1333.186038, X, Y)
[Mon Jun 17 05:16:51 2013] Writing fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src30.gif
[Mon Jun 17 05:38:59 2013] Mean detx,y = (-696.84, -16002.57) 
[Mon Jun 17 05:39:03 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 05:39:20 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 05:39:20 2013] Setting source spectrum file to fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon Jun 17 05:39:20 2013] Setting bgd. spectrum file to fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Mon Jun 17 05:56:43 2013] Not generating rmf since there are only 47 counts
[Mon Jun 17 05:56:43 2013] rmf not generated due to insufficient counts
[Mon Jun 17 06:22:01 2013] Updating aperture counts using extracted products
[Mon Jun 17 06:22:01 2013] Total counts from fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 74.00
[Mon Jun 17 06:22:01 2013] Total counts from fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src30_bgd.pi.gz = 279.00
[Mon Jun 17 06:22:01 2013] Got source and background scale factors 280000.000000, 2039715.000000
[Mon Jun 17 06:22:01 2013] User source parameters:
  Position = (382.2, 115.7) = 14 56 32.86 24 25 27.7
  Extent = 6.7 (4.5-9.9)" x 3.7 (3.4-5.4)", rotation angle = 355 (321-22) degrees
  Source aperture counts = 35.7 +/- 9.6
  Background aperture counts = 38.3
  Rate = 0.002 +/- 0.0006

[Mon Jun 17 06:22:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 06:22:03 2013] Using photon index=1.80, rate=0.00303, arf fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src30.arf
[Mon Jun 17 06:22:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 06:22:03 2013] Updating source flux to 3.8e-14
[Mon Jun 17 06:22:16 2013] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 17 06:22:19 2013] xmm0670300101/analysis//spectral/fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete