[Mon Jun 17 02:00:05 2013] Detection parameters:
  Position = (298.2, 348.1) = 14 56 59.61 24 42 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 475.5 +/- 27.8
  Background counts = 39.2
  Rate = 0.03 +/- 0.002

[Mon Jun 17 02:00:07 2013] Off-axis axis estimate = 3.60'
[Mon Jun 17 02:04:25 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 02:04:25 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Mon Jun 17 02:04:25 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.092
[Mon Jun 17 02:04:25 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.23"
[Mon Jun 17 03:05:15 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 17 03:05:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src3.csv
[Mon Jun 17 03:05:15 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 17 03:05:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src3.csv
[Mon Jun 17 03:05:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 03:05:16 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 17 03:05:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 17 03:05:16 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 17 03:05:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 17 03:05:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 03:39:14 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.167794 pixels away
[Mon Jun 17 03:39:14 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 03:39:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 03:39:14 2013] Assessing source extent using major
[Mon Jun 17 03:39:14 2013] Source does appear to be extended
[Mon Jun 17 03:39:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 03:39:33 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 03:39:33 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Mon Jun 17 03:39:33 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.092
[Mon Jun 17 03:39:33 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.23"
[Mon Jun 17 04:44:19 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 17 04:44:19 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 17 04:44:19 2013] Fit fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_src3 appears to have run properly
[Mon Jun 17 04:44:20 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 17 04:44:20 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 17 04:44:20 2013] Fit fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jun 17 05:16:31 2013] Spatial fit model total counts = 689.269000, observed total counts = 643.000000
[Mon Jun 17 05:16:31 2013] Offset between fit and detection position for source 3 = 0.221179 pixels
[Mon Jun 17 05:16:31 2013] 684.896000 total counts/ 353.091000 bgd. counts: snr = 17.657922
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.221179 pixels
  Position = (298.0, 348.2) = 14 56 59.68 24 42 19.1
  Extent = 6.8 (5.8-7.9)" x 5.0 (4.3-5.7)", rotation angle = 7 (351-24) degrees
  Source counts = 331.8 +/- 26.2
  Background counts = 353.1
  Rate = 0.02 +/- 0.002
[Mon Jun 17 05:16:31 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 05:16:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 05:16:31 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 05:16:31 2013] Source does appear to be extended
[Mon Jun 17 05:16:31 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Mon Jun 17 05:16:51 2013] XMMSAS src. selection expression = ellipse(25880.504400, 30244.402000, 410.931012, 297.147009, 6.530304, X, Y)
[Mon Jun 17 05:16:51 2013] Writing source region out to fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun 17 05:16:51 2013] Extracting stamp from image fullrun_pn_xmm0670300101_pi300-10000_cl_sm2.00.img.gz, (274, 325) - (322, 372)
[Mon Jun 17 05:16:51 2013] XMMSAS bgd. selection expression = annulus(25880.504400, 30244.402000, 684.885020, 1369.770039, X, Y)
[Mon Jun 17 05:16:51 2013] Writing fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src3.gif
[Mon Jun 17 05:18:52 2013] Mean detx,y = (-2907.30, 5382.49) 
[Mon Jun 17 05:18:57 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 05:19:26 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 05:19:26 2013] Setting source spectrum file to fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 17 05:19:26 2013] Setting bgd. spectrum file to fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jun 17 06:21:50 2013] Updating aperture counts using extracted products
[Mon Jun 17 06:21:51 2013] Total counts from fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 410.00
[Mon Jun 17 06:21:51 2013] Total counts from fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 436.00
[Mon Jun 17 06:21:51 2013] Got source and background scale factors 385600.000000, 3302388.000000
[Mon Jun 17 06:21:51 2013] User source parameters:
  Position = (298.0, 348.2) = 14 56 59.68 24 42 19.1
  Extent = 6.8 (5.8-7.9)" x 5.0 (4.3-5.7)", rotation angle = 7 (351-24) degrees
  Source aperture counts = 359.1 +/- 21.3
  Background aperture counts = 50.9
  Rate = 0.02 +/- 0.001

[Mon Jun 17 06:22:02 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 06:22:02 2013] Using photon index=1.80, rate=0.0212, arf fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src3.arf
[Mon Jun 17 06:22:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 06:22:02 2013] Updating source flux to 9.3e-14
[Mon Jun 17 06:22:19 2013] xmm0670300101/analysis//spectral/fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete