[Mon Jun 17 02:00:06 2013] Detection parameters:
  Position = (256.1, 292.1) = 14 57 13.06 24 38 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.8 +/- 14.1
  Background counts = 39.7
  Rate = 0.004 +/- 0.0007

[Mon Jun 17 02:00:07 2013] Off-axis axis estimate = 3.11'
[Mon Jun 17 02:04:25 2013] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 02:04:25 2013] Initial guess for spatial extent in simple fitting = 7.98"
[Mon Jun 17 02:04:25 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.734
[Mon Jun 17 02:04:25 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 7.98"
[Mon Jun 17 03:05:15 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src18.ximg exists
[Mon Jun 17 03:05:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src18.csv
[Mon Jun 17 03:05:15 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Jun 17 03:05:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src18.csv
[Mon Jun 17 03:05:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 03:05:16 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Jun 17 03:05:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jun 17 03:05:16 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Jun 17 03:05:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jun 17 03:05:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670300101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 03:39:14 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 11.057979 pixels away
[Mon Jun 17 03:39:14 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 03:39:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 03:39:14 2013] Assessing source extent using major
[Mon Jun 17 03:39:14 2013] Source does appear to be extended
[Mon Jun 17 03:39:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 03:39:33 2013] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 03:39:33 2013] Initial guess for spatial extent in simple fitting = 7.98"
[Mon Jun 17 03:39:33 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.734
[Mon Jun 17 03:39:33 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 7.98"
[Mon Jun 17 04:44:19 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_src17.ximg exists
[Mon Jun 17 04:44:19 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Jun 17 04:44:19 2013] Fit fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_src17 appears to have run properly
[Mon Jun 17 04:44:20 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Jun 17 04:44:20 2013] fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Jun 17 04:44:20 2013] Fit fullrun_pn_xmm0670300101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Jun 17 05:16:31 2013] Spatial fit model total counts = 311.997000, observed total counts = 287.000000
[Mon Jun 17 05:16:31 2013] Offset between fit and detection position for source 18 = 0.047129 pixels
[Mon Jun 17 05:16:31 2013] 313.104800 total counts/ 261.136000 bgd. counts: snr = 3.215950
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.047129 pixels
  Position = (256.1, 292.1) = 14 57 13.07 24 38 14.9
  Extent = 5.1 (3.8-7.0)", rotation angle = 0
  Source counts = 52.0 +/- 17.7
  Background counts = 261.1
  Rate = 0.003 +/- 0.001
[Mon Jun 17 05:16:32 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 05:16:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 05:16:32 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 05:16:32 2013] Source does appear to be extended
[Mon Jun 17 05:16:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 05:16:51 2013] XMMSAS src. selection expression = ellipse(22229.744560, 25360.960400, 307.082409, 307.082409, 0.000000, X, Y)
[Mon Jun 17 05:16:51 2013] Writing source region out to fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src18_src.reg
[Mon Jun 17 05:16:51 2013] Extracting stamp from image fullrun_pn_xmm0670300101_pi300-10000_cl_sm2.00.img.gz, (238, 274) - (274, 310)
[Mon Jun 17 05:16:51 2013] XMMSAS bgd. selection expression = annulus(22229.744560, 25360.960400, 511.804015, 1023.608029, X, Y)
[Mon Jun 17 05:16:51 2013] Writing fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src18.gif
[Mon Jun 17 05:29:56 2013] Mean detx,y = (2499.34, 2566.80) 
[Mon Jun 17 05:30:00 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 05:30:21 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 05:30:22 2013] Setting source spectrum file to fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Jun 17 05:30:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Jun 17 05:48:01 2013] Not generating rmf since there are only 51 counts
[Mon Jun 17 05:48:01 2013] rmf not generated due to insufficient counts
[Mon Jun 17 06:21:56 2013] Updating aperture counts using extracted products
[Mon Jun 17 06:21:56 2013] Total counts from fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 97.00
[Mon Jun 17 06:21:56 2013] Total counts from fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 272.00
[Mon Jun 17 06:21:57 2013] Got source and background scale factors 300800.000000, 2107868.000000
[Mon Jun 17 06:21:57 2013] User source parameters:
  Position = (256.1, 292.1) = 14 57 13.07 24 38 14.9
  Extent = 5.1 (3.8-7.0)", rotation angle = 0
  Source aperture counts = 58.2 +/- 10.9
  Background aperture counts = 38.8
  Rate = 0.004 +/- 0.0007

[Mon Jun 17 06:22:02 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 06:22:02 2013] Using photon index=1.80, rate=0.00332, arf fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src18.arf
[Mon Jun 17 06:22:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 06:22:03 2013] Updating source flux to 1.2e-14
[Mon Jun 17 06:22:16 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 17 06:22:19 2013] xmm0670300101/analysis//spectral/fullrun_pn_xmm0670300101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete