[Fri Jun  7 18:00:01 2013] Detection parameters:
  Position = (135.8, 255.2) = 23 41 51.39 -53 32 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.8 +/- 12.1
  Background counts = 12.4
  Rate = 0.002 +/- 0.0003

[Fri Jun  7 18:00:01 2013] Off-axis axis estimate = 12.20'
[Fri Jun  7 19:32:05 2013] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 19:32:05 2013] Initial guess for spatial extent in simple fitting = 12.53"
[Fri Jun  7 19:32:05 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.072
[Fri Jun  7 19:32:05 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 12.53"
[Fri Jun  7 20:12:10 2013] fullrun_mos1_xmm0670170401_pi300-10000_cl_pass0_src21.ximg exists
[Fri Jun  7 20:12:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670170401_pi300-10000_cl_pass0_src21.csv
[Fri Jun  7 20:12:10 2013] fullrun_mos1_xmm0670170401_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Jun  7 20:12:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670170401_pi300-10000_cl_pass0_src21.csv
[Fri Jun  7 20:12:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670170401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670170401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 20:12:10 2013] fullrun_mos1_xmm0670170401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Jun  7 20:12:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670170401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Jun  7 20:12:10 2013] fullrun_mos1_xmm0670170401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Jun  7 20:12:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670170401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Jun  7 20:12:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670170401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670170401_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 21:05:11 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 14.750660 pixels away
[Fri Jun  7 21:05:11 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 21:05:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 21:05:11 2013] Assessing source extent using major
[Fri Jun  7 21:05:11 2013] Source does appear to be extended
[Fri Jun  7 21:05:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 22:33:22 2013] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 22:33:22 2013] Initial guess for spatial extent in simple fitting = 12.53"
[Fri Jun  7 22:33:22 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.072
[Fri Jun  7 22:33:22 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 12.53"
[Fri Jun  7 23:10:15 2013] fullrun_mos1_xmm0670170401_pi300-10000_cl_pass1_src20.ximg exists
[Fri Jun  7 23:10:15 2013] fullrun_mos1_xmm0670170401_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Jun  7 23:10:15 2013] Fit fullrun_mos1_xmm0670170401_pi300-10000_cl_pass1_src20 appears to have run properly
[Fri Jun  7 23:10:15 2013] fullrun_mos1_xmm0670170401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Jun  7 23:10:15 2013] fullrun_mos1_xmm0670170401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Jun  7 23:10:15 2013] Fit fullrun_mos1_xmm0670170401_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sat Jun  8 00:03:39 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 12.090063 pixels away
[Sat Jun  8 00:03:39 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 67.463874 pixels away
[Sat Jun  8 00:03:39 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 00:03:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 00:03:39 2013] Assessing source extent using major
[Sat Jun  8 00:03:39 2013] Source does appear to be extended
[Sat Jun  8 00:03:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 01:47:32 2013] XMMSAS src. selection expression = ellipse(11769.705795, 22152.378403, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 01:47:32 2013] Writing source region out to fullrun_mos1_xmm0670170401_pi300-10000_pass1_cl_src31_src.reg
[Sat Jun  8 01:47:32 2013] Extracting stamp from image fullrun_mos1_xmm0670170401_pi300-10000_cl_sm2.00.img.gz, (98, 218) - (173, 293)
[Sat Jun  8 01:47:32 2013] XMMSAS bgd. selection expression = annulus(11769.705795, 22152.378403, 1087.500000, 2175.000000, X, Y)
[Sat Jun  8 01:47:32 2013] Writing fullrun_mos1_xmm0670170401_pi300-10000_pass1_cl_src31.gif
[Sat Jun  8 01:55:52 2013] Mean detx,y = (-8799.90, -13948.72) 
[Sat Jun  8 01:55:55 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  8 01:56:12 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  8 01:56:12 2013] Setting source spectrum file to fullrun_mos1_xmm0670170401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Jun  8 01:56:12 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0670170401_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat Jun  8 02:24:00 2013] Not generating rmf since there are only 78 counts
[Sat Jun  8 02:24:00 2013] rmf not generated due to insufficient counts
[Sat Jun  8 03:26:10 2013] Updating aperture counts using extracted products
[Sat Jun  8 03:26:10 2013] Total counts from fullrun_mos1_xmm0670170401_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 145.00
[Sat Jun  8 03:26:10 2013] Total counts from fullrun_mos1_xmm0670170401_pi300-10000_pass1_cl_src31_bgd.pi.gz = 414.00
[Sat Jun  8 03:26:10 2013] Got source and background scale factors 1340800.000000, 6544795.000000
[Sat Jun  8 03:26:11 2013] User source parameters:
  Position = (135.8, 255.2) = 23 41 51.39 -53 32 59.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 60.2 +/- 13.1
  Background aperture counts = 84.8
  Rate = 0.001 +/- 0.0003

[Sat Jun  8 03:26:11 2013] Updating counts from extracted products
[Sat Jun  8 03:26:11 2013] Set source signif. to 60.19/9.21 = 6.54
[Sat Jun  8 03:26:15 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 03:26:15 2013] Using photon index=1.80, rate=0.00126, arf fullrun_mos1_xmm0670170401_pi300-10000_pass1_cl_src31.arf
[Sat Jun  8 03:26:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 03:26:15 2013] Updating source flux to 3.9e-14
[Sat Jun  8 03:26:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 03:26:35 2013] xmm0670170401/analysis//spectral/fullrun_mos1_xmm0670170401_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete