[Sun Aug  5 12:50:55 2012] Detection parameters:
  Position = (277.1, 289.8) = 22 42 39.04 29 43 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 655590.2 +/- 895.2
  Background counts = 42.5
  Rate = 1e+01 +/- 0.02

[Sun Aug  5 12:50:56 2012] Off-axis axis estimate = 1.67'
[Sun Aug  5 14:32:47 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 14:32:47 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sun Aug  5 14:32:47 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Sun Aug  5 14:32:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Sun Aug  5 15:26:41 2012] fullrun_mos2_xmm0670130901_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug  5 15:26:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670130901_pi300-10000_cl_pass0_src1.csv
[Sun Aug  5 15:26:41 2012] fullrun_mos2_xmm0670130901_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug  5 15:26:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670130901_pi300-10000_cl_pass0_src1.csv
[Sun Aug  5 15:26:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670130901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670130901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 15:26:41 2012] fullrun_mos2_xmm0670130901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug  5 15:26:41 2012] fullrun_mos2_xmm0670130901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug  5 15:26:41 2012] Fit fullrun_mos2_xmm0670130901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug  5 15:26:52 2012] Spatial fit model total counts = 560567.000000, observed total counts = 586814.000000
[Sun Aug  5 15:26:52 2012] Offset between fit and detection position for source 1 = 0.193041 pixels
[Sun Aug  5 15:26:52 2012] 548801.000000 total counts/ 25600.000000 bgd. counts: snr = 3270.006250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.193041 pixels
  Position = (277.1, 289.6) = 22 42 39.03 29 43 30.5
  Extent = 7.1 (7.0-7.1)", rotation angle = 0
  Source counts = 523201.0 +/- 740.8
  Background counts = 25600.0
  Rate = 9 +/- 0.01
[Sun Aug  5 15:26:52 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 15:26:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 15:26:52 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 15:26:52 2012] Source does appear to be extended
[Sun Aug  5 15:26:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 16:17:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug  5 16:17:56 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Sun Aug  5 16:17:56 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.888
[Sun Aug  5 16:17:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.06"
[Sun Aug  5 17:33:16 2012] fullrun_mos2_xmm0670130901_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug  5 17:33:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670130901_pi300-10000_cl_pass1_src1.csv
[Sun Aug  5 17:33:16 2012] fullrun_mos2_xmm0670130901_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug  5 17:33:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670130901_pi300-10000_cl_pass1_src1.csv
[Sun Aug  5 17:33:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670130901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670130901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 17:33:16 2012] fullrun_mos2_xmm0670130901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug  5 17:33:16 2012] fullrun_mos2_xmm0670130901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug  5 17:33:16 2012] Fit fullrun_mos2_xmm0670130901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug  5 17:33:20 2012] Spatial fit model total counts = 572203.000000, observed total counts = 586814.000000
[Sun Aug  5 17:33:20 2012] Offset between fit and detection position for source 1 = 0.147517 pixels
[Sun Aug  5 17:33:20 2012] 548734.300000 total counts/ 25599.300000 bgd. counts: snr = 3269.638452
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.147517 pixels
  Position = (277.1, 289.8) = 22 42 39.06 29 43 31.0
  Extent = 7.0 (7.0-7.0)", rotation angle = 0
  Source counts = 523135.0 +/- 740.8
  Background counts = 25599.3
  Rate = 9 +/- 0.01
[Sun Aug  5 17:33:20 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 17:33:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 17:33:20 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 17:33:20 2012] Source does appear to be extended
[Sun Aug  5 17:33:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 18:51:16 2012] Counts = 523135.000000, rescaling region sizes by 3.000000
[Sun Aug  5 18:51:16 2012] XMMSAS src. selection expression = ellipse(24055.200180, 25160.069000, 1252.539036, 1252.539036, 0.000000, X, Y)
[Sun Aug  5 18:51:16 2012] Writing source region out to fullrun_mos2_xmm0670130901_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug  5 18:51:16 2012] Extracting stamp from image fullrun_mos2_xmm0670130901_pi300-10000_cl_sm2.00.img.gz, (205, 218) - (349, 362)
[Sun Aug  5 18:51:16 2012] XMMSAS bgd. selection expression = annulus(24055.200180, 25160.069000, 6262.695180, 12525.390360, X, Y) && !ellipse(22936.149689, 25270.756775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23363.463379, 25865.148804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23740.259827, 26278.380219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21940.256165, 14227.704041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20351.596202, 14341.890860, 673.344019, 673.344019, 0.000000, X, Y)
[Sun Aug  5 18:51:16 2012] Writing fullrun_mos2_xmm0670130901_pi300-10000_pass1_cl_src1.gif
[Sun Aug  5 18:51:52 2012] Mean detx,y = (136.19, 64.52) 
[Sun Aug  5 18:51:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 18:56:32 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 18:56:32 2012] Setting source spectrum file to fullrun_mos2_xmm0670130901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 18:56:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0670130901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug  5 20:14:23 2012] Updating aperture counts using extracted products
[Sun Aug  5 20:14:23 2012] Error reading totcts from fullrun_mos2_xmm0670130901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 20:14:23 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 20:14:23 2012] Using photon index=1.80, rate=9.41, arf fullrun_mos2_xmm0670130901_pi300-10000_pass1_cl_src1.arf
[Sun Aug  5 20:14:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 20:14:23 2012] Updating source flux to 9.1e-11
[Sun Aug  5 20:15:01 2012] Reading fit data from xmm0670130901/analysis//spectral/fullrun_mos2_xmm0670130901_pi300-10000_pass1_cl_src1_pl.csv
[Sun Aug  5 20:15:01 2012] Spectral fit parameter nH value = 5.54568e+20
[Sun Aug  5 20:15:01 2012] Spectral fit parameter PhoIndex value = 2.87189
[Sun Aug  5 20:15:01 2012] Failed to get F(0.3-8.0) from xmm0670130901/analysis//spectral/fullrun_mos2_xmm0670130901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Aug  5 20:15:01 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 20:15:01 2012] Using Nh = 5.5e+20, photon index=2.87, rate=9.41, arf fullrun_mos2_xmm0670130901_pi300-10000_pass1_cl_src1.arf
[Sun Aug  5 20:15:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 20:15:01 2012] Updating source flux to 6.7e-11