[Sun Aug  5 12:50:30 2012] Detection parameters:
  Position = (448.9, 352.6) = 22 41 41.62 29 48 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.9 +/- 10.0
  Background counts = 19.9
  Rate = 0.0009 +/- 0.0002

[Sun Aug  5 12:50:31 2012] Off-axis axis estimate = 11.60'
[Sun Aug  5 13:49:27 2012] Using EEF radius (= 12.23 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 13:49:27 2012] Initial guess for spatial extent in simple fitting = 12.23"
[Sun Aug  5 13:49:27 2012] source mask rpix=2.8, npix_max = 43, mask sum = 41, frac = 0.935
[Sun Aug  5 13:49:27 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 12.23"
[Sun Aug  5 14:32:47 2012] fullrun_mos1_xmm0670130901_pi300-10000_cl_pass0_src21.ximg exists
[Sun Aug  5 14:32:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670130901_pi300-10000_cl_pass0_src21.csv
[Sun Aug  5 14:32:47 2012] fullrun_mos1_xmm0670130901_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Aug  5 14:32:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670130901_pi300-10000_cl_pass0_src21.csv
[Sun Aug  5 14:32:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670130901_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670130901_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 14:32:47 2012] fullrun_mos1_xmm0670130901_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Aug  5 14:32:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0670130901_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Aug  5 14:32:47 2012] fullrun_mos1_xmm0670130901_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Aug  5 14:32:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0670130901_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Aug  5 14:32:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670130901_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670130901_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 15:26:48 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.220747 pixels away
[Sun Aug  5 15:26:48 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 15:26:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 15:26:48 2012] Assessing source extent using major
[Sun Aug  5 15:26:48 2012] Source does appear to be extended
[Sun Aug  5 15:26:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 15:26:48 2012] Deleting source due to low Poisson probability 0.7