[Fri Aug 10 10:58:04 2012] Detection parameters:
  Position = (278.4, 287.8) = 22 42 39.14 29 43 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 557491.0 +/- 907.6
  Background counts = 111.4
  Rate = 1e+01 +/- 0.02

[Fri Aug 10 10:58:05 2012] Off-axis axis estimate = 1.65'
[Fri Aug 10 12:34:41 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 12:34:41 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Fri Aug 10 12:34:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Fri Aug 10 12:34:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Fri Aug 10 18:31:11 2012] fullrun_mos2_xmm0670130601_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 10 18:31:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670130601_pi300-10000_cl_pass0_src1.csv
[Fri Aug 10 18:31:11 2012] fullrun_mos2_xmm0670130601_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 10 18:31:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670130601_pi300-10000_cl_pass0_src1.csv
[Fri Aug 10 18:31:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670130601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670130601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 18:31:11 2012] fullrun_mos2_xmm0670130601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 10 18:31:11 2012] fullrun_mos2_xmm0670130601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 10 18:31:11 2012] Fit fullrun_mos2_xmm0670130601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 10 18:31:22 2012] Spatial fit model total counts = 439902.000000, observed total counts = 466590.000000
[Fri Aug 10 18:31:22 2012] Offset between fit and detection position for source 1 = 0.140945 pixels
[Fri Aug 10 18:31:22 2012] 437041.000000 total counts/ 25600.000000 bgd. counts: snr = 2571.506250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.140945 pixels
  Position = (278.3, 287.7) = 22 42 39.18 29 43 31.3
  Extent = 6.9 (6.9-6.9)", rotation angle = 0
  Source counts = 411441.0 +/- 661.1
  Background counts = 25600.0
  Rate = 7 +/- 0.01
[Fri Aug 10 18:31:22 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 18:31:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 18:31:22 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 18:31:22 2012] Source does appear to be extended
[Fri Aug 10 18:31:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 18:59:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 10 18:59:38 2012] Initial guess for spatial extent in simple fitting = 6.88"
[Fri Aug 10 18:59:38 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.924
[Fri Aug 10 18:59:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.88"
[Fri Aug 10 20:15:48 2012] fullrun_mos2_xmm0670130601_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 10 20:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670130601_pi300-10000_cl_pass1_src1.csv
[Fri Aug 10 20:15:48 2012] fullrun_mos2_xmm0670130601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 10 20:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670130601_pi300-10000_cl_pass1_src1.csv
[Fri Aug 10 20:15:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670130601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670130601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 20:15:49 2012] fullrun_mos2_xmm0670130601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 10 20:15:49 2012] fullrun_mos2_xmm0670130601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 10 20:15:49 2012] Fit fullrun_mos2_xmm0670130601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 10 20:15:56 2012] Spatial fit model total counts = 459757.000000, observed total counts = 466590.000000
[Fri Aug 10 20:15:56 2012] Offset between fit and detection position for source 1 = 0.044058 pixels
[Fri Aug 10 20:15:56 2012] 441292.000000 total counts/ 25600.000000 bgd. counts: snr = 2598.075000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.044058 pixels
  Position = (278.3, 287.7) = 22 42 39.17 29 43 31.1
  Extent = 7.0 (7.0-7.0)", rotation angle = 0
  Source counts = 415692.0 +/- 664.3
  Background counts = 25600.0
  Rate = 7 +/- 0.01
[Fri Aug 10 20:15:56 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 20:15:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 20:15:56 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 20:15:56 2012] Source does appear to be extended
[Fri Aug 10 20:15:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 22:48:35 2012] Counts = 415692.000000, rescaling region sizes by 3.000000
[Fri Aug 10 22:48:35 2012] XMMSAS src. selection expression = ellipse(24163.090200, 24979.975200, 1265.479236, 1265.479236, 0.000000, X, Y)
[Fri Aug 10 22:48:35 2012] Writing source region out to fullrun_mos2_xmm0670130601_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 10 22:48:35 2012] Extracting stamp from image fullrun_mos2_xmm0670130601_pi300-10000_cl_sm2.00.img.gz, (206, 215) - (351, 360)
[Fri Aug 10 22:48:35 2012] XMMSAS bgd. selection expression = annulus(24163.090200, 24979.975200, 6327.396182, 12654.792364, X, Y) && !ellipse(23133.641388, 24875.993744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.903473, 26019.509552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23395.836151, 25632.677094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23148.764435, 25277.856323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22033.390610, 14050.300293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20530.358612, 14111.689880, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 10 22:48:35 2012] Writing fullrun_mos2_xmm0670130601_pi300-10000_pass1_cl_src1.gif
[Fri Aug 10 22:49:25 2012] Mean detx,y = (112.11, 28.25) 
[Fri Aug 10 22:49:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 22:54:45 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 22:54:46 2012] Setting source spectrum file to fullrun_mos2_xmm0670130601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 10 22:54:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0670130601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Aug 11 00:23:52 2012] Updating aperture counts using extracted products
[Sat Aug 11 00:23:52 2012] Error reading totcts from fullrun_mos2_xmm0670130601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug 11 00:23:53 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 00:23:53 2012] Using photon index=1.80, rate=7.3, arf fullrun_mos2_xmm0670130601_pi300-10000_pass1_cl_src1.arf
[Sat Aug 11 00:23:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 00:23:53 2012] Updating source flux to 7.2e-11
[Sat Aug 11 00:24:41 2012] Reading fit data from xmm0670130601/analysis//spectral/fullrun_mos2_xmm0670130601_pi300-10000_pass1_cl_src1_pl.csv
[Sat Aug 11 00:24:41 2012] Spectral fit parameter nH value = 5.15473e+20
[Sat Aug 11 00:24:41 2012] Spectral fit parameter PhoIndex value = 2.82135
[Sat Aug 11 00:24:41 2012] Failed to get F(0.3-8.0) from xmm0670130601/analysis//spectral/fullrun_mos2_xmm0670130601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Aug 11 00:24:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 00:24:41 2012] Using Nh = 5.2e+20, photon index=2.82, rate=7.3, arf fullrun_mos2_xmm0670130601_pi300-10000_pass1_cl_src1.arf
[Sat Aug 11 00:24:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 00:24:41 2012] Updating source flux to 5.3e-11