[Fri Aug 10 10:57:34 2012] Detection parameters:
  Position = (278.3, 287.8) = 22 42 39.15 29 43 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 561981.5 +/- 855.7
  Background counts = 154.1
  Rate = 1e+01 +/- 0.01

[Fri Aug 10 10:57:34 2012] Off-axis axis estimate = 1.65'
[Fri Aug 10 12:12:51 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 12:12:51 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Fri Aug 10 12:12:51 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.064
[Fri Aug 10 12:12:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Fri Aug 10 12:34:41 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 10 12:34:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_src1.csv
[Fri Aug 10 12:34:41 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 10 12:34:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_src1.csv
[Fri Aug 10 12:34:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 12:34:41 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 10 12:34:41 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 10 12:34:41 2012] Fit fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 10 18:31:18 2012] Spatial fit model total counts = 437179.000000, observed total counts = 469605.000000
[Fri Aug 10 18:31:18 2012] Offset between fit and detection position for source 2 = 0.158371 pixels
[Fri Aug 10 18:31:18 2012] 436716.000000 total counts/ 25600.000000 bgd. counts: snr = 2569.475000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.158371 pixels
  Position = (278.4, 287.6) = 22 42 39.15 29 43 31.0
  Extent = 6.7 (6.7-6.7)", rotation angle = 0
  Source counts = 411116.0 +/- 660.8
  Background counts = 25600.0
  Rate = 7 +/- 0.01
[Fri Aug 10 18:31:18 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 18:31:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 18:31:18 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 18:31:18 2012] Source does appear to be extended
[Fri Aug 10 18:31:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 18:50:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 10 18:50:31 2012] Initial guess for spatial extent in simple fitting = 6.72"
[Fri Aug 10 18:50:31 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.956
[Fri Aug 10 18:50:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.72"
[Fri Aug 10 18:59:38 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 10 18:59:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_src1.csv
[Fri Aug 10 18:59:38 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 10 18:59:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_src1.csv
[Fri Aug 10 18:59:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 18:59:38 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 10 18:59:38 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 10 18:59:38 2012] Fit fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 10 20:15:53 2012] Spatial fit model total counts = 437829.000000, observed total counts = 469754.000000
[Fri Aug 10 20:15:53 2012] Offset between fit and detection position for source 2 = 0.005854 pixels
[Fri Aug 10 20:15:53 2012] 437564.000000 total counts/ 25600.000000 bgd. counts: snr = 2574.775000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.005854 pixels
  Position = (278.4, 287.6) = 22 42 39.15 29 43 30.9
  Extent = 6.7 (6.7-6.8)", rotation angle = 0
  Source counts = 411964.0 +/- 661.5
  Background counts = 25600.0
  Rate = 7 +/- 0.01
[Fri Aug 10 20:15:53 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 20:15:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 20:15:53 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 20:15:53 2012] Source does appear to be extended
[Fri Aug 10 20:15:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 21:36:24 2012] Counts = 411964.000000, rescaling region sizes by 3.000000
[Fri Aug 10 21:36:24 2012] XMMSAS src. selection expression = ellipse(24168.493400, 24976.385600, 1214.323235, 1214.323235, 0.000000, X, Y)
[Fri Aug 10 21:36:24 2012] Writing source region out to fullrun_mos1_xmm0670130601_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug 10 21:36:24 2012] Extracting stamp from image fullrun_mos1_xmm0670130601_pi300-10000_cl_sm2.00.img.gz, (209, 218) - (348, 357)
[Fri Aug 10 21:36:24 2012] XMMSAS bgd. selection expression = annulus(24168.493400, 24976.385600, 6071.616175, 12143.232349, X, Y) && !ellipse(22034.577408, 14057.427719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20507.927597, 14117.629181, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 10 21:36:24 2012] Writing fullrun_mos1_xmm0670130601_pi300-10000_pass1_cl_src2.gif
[Fri Aug 10 21:37:19 2012] Mean detx,y = (243.48, -259.01) 
[Fri Aug 10 21:37:27 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 21:43:11 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 21:43:12 2012] Setting source spectrum file to fullrun_mos1_xmm0670130601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 10 21:43:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0670130601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Aug 11 00:23:52 2012] Updating aperture counts using extracted products
[Sat Aug 11 00:23:52 2012] Error reading totcts from fullrun_mos1_xmm0670130601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug 11 00:23:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 00:23:52 2012] Using photon index=1.80, rate=7.29, arf fullrun_mos1_xmm0670130601_pi300-10000_pass1_cl_src2.arf
[Sat Aug 11 00:23:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 00:23:52 2012] Updating source flux to 6.5e-11
[Sat Aug 11 00:24:17 2012] Reading fit data from xmm0670130601/analysis//spectral/fullrun_mos1_xmm0670130601_pi300-10000_pass1_cl_src2_pl.csv
[Sat Aug 11 00:24:17 2012] Spectral fit parameter nH value = 4.92705e+20
[Sat Aug 11 00:24:17 2012] Spectral fit parameter PhoIndex value = 2.85764
[Sat Aug 11 00:24:17 2012] Failed to get F(0.3-8.0) from xmm0670130601/analysis//spectral/fullrun_mos1_xmm0670130601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Aug 11 00:24:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 00:24:17 2012] Using Nh = 4.9e+20, photon index=2.86, rate=7.29, arf fullrun_mos1_xmm0670130601_pi300-10000_pass1_cl_src2.arf
[Sat Aug 11 00:24:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 00:24:17 2012] Updating source flux to 4.8e-11