[Fri Aug 10 10:57:34 2012] Detection parameters:
  Position = (253.8, 162.1) = 22 42 47.31 29 34 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 723.1 +/- 34.6
  Background counts = 79.5
  Rate = 0.01 +/- 0.0006

[Fri Aug 10 10:57:34 2012] Off-axis axis estimate = 10.40'
[Fri Aug 10 12:12:51 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 12:12:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 10 12:12:51 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Fri Aug 10 12:12:51 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.894
[Fri Aug 10 12:12:51 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.63"
[Fri Aug 10 12:34:41 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_src2.ximg exists
[Fri Aug 10 12:34:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_src2.csv
[Fri Aug 10 12:34:41 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Aug 10 12:34:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_src2.csv
[Fri Aug 10 12:34:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 12:34:41 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Aug 10 12:34:41 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Aug 10 12:34:41 2012] Fit fullrun_mos1_xmm0670130601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Aug 10 18:31:18 2012] Warning, spatial fit 2 centroid is now closest to src. 10
[Fri Aug 10 18:31:18 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.646004 pixels away
[Fri Aug 10 18:31:18 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 18:31:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 18:31:18 2012] Assessing source extent using major
[Fri Aug 10 18:31:18 2012] Source does appear to be extended
[Fri Aug 10 18:31:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 18:50:31 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 18:50:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 10 18:50:31 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Fri Aug 10 18:50:31 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.894
[Fri Aug 10 18:50:31 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.63"
[Fri Aug 10 18:59:38 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_src2.ximg exists
[Fri Aug 10 18:59:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_src2.csv
[Fri Aug 10 18:59:38 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Aug 10 18:59:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_src2.csv
[Fri Aug 10 18:59:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 18:59:38 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Aug 10 18:59:38 2012] fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Aug 10 18:59:38 2012] Fit fullrun_mos1_xmm0670130601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Aug 10 20:15:53 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.191970 pixels away
[Fri Aug 10 20:15:53 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.192084 pixels away
[Fri Aug 10 20:15:53 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 20:15:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 20:15:53 2012] Assessing source extent using major
[Fri Aug 10 20:15:53 2012] Source does appear to be extended
[Fri Aug 10 20:15:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 21:36:24 2012] XMMSAS src. selection expression = ellipse(22034.577408, 14057.427719, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 10 21:36:24 2012] Writing source region out to fullrun_mos1_xmm0670130601_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 10 21:36:24 2012] Extracting stamp from image fullrun_mos1_xmm0670130601_pi300-10000_cl_sm2.00.img.gz, (216, 125) - (291, 200)
[Fri Aug 10 21:36:24 2012] XMMSAS bgd. selection expression = annulus(22034.577408, 14057.427719, 1087.500000, 2175.000000, X, Y) && !ellipse(20507.927597, 14117.629181, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 10 21:36:24 2012] Writing fullrun_mos1_xmm0670130601_pi300-10000_pass1_cl_src1.gif
[Fri Aug 10 21:43:28 2012] Mean detx,y = (10869.46, -3570.54) 
[Fri Aug 10 21:43:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 21:43:46 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 21:43:46 2012] Setting source spectrum file to fullrun_mos1_xmm0670130601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 10 21:43:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0670130601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 10 22:47:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 10 22:47:57 2012] rmf not generated due to insufficient counts
[Sat Aug 11 00:23:52 2012] Updating aperture counts using extracted products
[Sat Aug 11 00:23:52 2012] Error reading totcts from fullrun_mos1_xmm0670130601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug 11 00:23:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 00:23:52 2012] Using photon index=1.80, rate=0.0119, arf fullrun_mos1_xmm0670130601_pi300-10000_pass1_cl_src1.arf
[Sat Aug 11 00:23:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 00:23:52 2012] Updating source flux to 2.3e-13
[Sat Aug 11 00:23:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting