[Wed May  8 01:59:46 2013] Detection parameters:
  Position = (416.3, 465.1) = 22 53 36.05 -17 23 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.8 +/- 14.1
  Background counts = 39.1
  Rate = 0.0006 +/- 0.0001

[Wed May  8 01:59:49 2013] Off-axis axis estimate = 14.80'
[Wed May  8 04:22:34 2013] Using EEF radius (= 13.83 ")to estimate initial spatial extent for simple fitting
[Wed May  8 04:22:34 2013] Initial guess for spatial extent in simple fitting = 13.83"
[Wed May  8 04:22:34 2013] source mask rpix=3.2, npix_max = 54, mask sum = 51, frac = 0.942
[Wed May  8 04:22:34 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 13.83"
[Wed May  8 06:07:52 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src49.ximg exists
[Wed May  8 06:07:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src49.csv
[Wed May  8 06:07:52 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src49_1.ximg exists
[Wed May  8 06:07:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src49.csv
[Wed May  8 06:07:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 06:07:52 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Wed May  8 06:07:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src49.csv
[Wed May  8 06:07:52 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Wed May  8 06:07:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src49.csv
[Wed May  8 06:07:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 06:08:12 2013] Source 16 is offset by 0.571978 and -2.598127 pixels which is larger than
2 X fitted extent = 1.525062 x 1.525062, not incorporating fit results
[Wed May  8 06:08:12 2013] Warning, spatial fit 49 centroid is now closest to src. 19
[Wed May  8 06:08:12 2013] Vigneting correction estimate = 1.000000
[Wed May  8 06:08:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 06:08:12 2013] Assessing source extent using major
[Wed May  8 06:08:12 2013] Source does appear to be extended
[Wed May  8 06:08:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 06:08:12 2013] Deleting source due to low Poisson probability 0.9