[Wed May  8 01:59:46 2013] Detection parameters:
  Position = (420.6, 471.7) = 22 53 34.74 -17 23 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.6 +/- 13.0
  Background counts = 33.3
  Rate = 0.0006 +/- 0.0001

[Wed May  8 01:59:49 2013] Off-axis axis estimate = 15.37'
[Wed May  8 04:22:34 2013] Using EEF radius (= 14.11 ")to estimate initial spatial extent for simple fitting
[Wed May  8 04:22:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 04:22:34 2013] Initial guess for spatial extent in simple fitting = 14.11"
[Wed May  8 04:22:34 2013] source mask rpix=3.2, npix_max = 56, mask sum = 36, frac = 0.642
[Wed May  8 04:22:34 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 14.11"
[Wed May  8 06:07:52 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src50.ximg exists
[Wed May  8 06:07:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src50.csv
[Wed May  8 06:07:52 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src50_1.ximg exists
[Wed May  8 06:07:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src50.csv
[Wed May  8 06:07:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 06:07:52 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Wed May  8 06:07:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src50.csv
[Wed May  8 06:07:53 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Wed May  8 06:07:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src50.csv
[Wed May  8 06:07:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 06:08:12 2013] Warning, spatial fit 50 centroid is now closest to src. 17
[Wed May  8 06:08:12 2013] Vigneting correction estimate = 1.000000
[Wed May  8 06:08:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 06:08:12 2013] Assessing source extent using major
[Wed May  8 06:08:12 2013] Source does appear to be extended
[Wed May  8 06:08:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 06:08:12 2013] Deleting source due to low Poisson probability 0.9