[Wed May 8 01:59:46 2013] Detection parameters: Position = (328.0, 303.9) = 22 54 2.88 -17 35 27.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1189.0 +/- 59.3 Background counts = 76.7 Rate = 0.01 +/- 0.0006 [Wed May 8 01:59:49 2013] Off-axis axis estimate = 2.18' [Wed May 8 04:22:34 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting [Wed May 8 04:22:34 2013] Initial guess for spatial extent in simple fitting = 7.52" [Wed May 8 04:22:34 2013] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.705 [Wed May 8 04:22:34 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.52" [Wed May 8 06:07:51 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src3.ximg exists [Wed May 8 06:07:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src3.csv [Wed May 8 06:07:51 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src3_1.ximg exists [Wed May 8 06:07:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src3.csv [Wed May 8 06:07:51 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 06:07:52 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Wed May 8 06:07:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src3.csv [Wed May 8 06:07:52 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Wed May 8 06:07:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src3.csv [Wed May 8 06:07:52 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0670120301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 06:08:12 2013] Spatial fit model total counts = 43221.000000, observed total counts = 38512.000000 [Wed May 8 06:08:12 2013] Poor agreement between spatial fit and data for source 10 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 8 06:08:12 2013] Warning, spatial fit 3 centroid is now closest to src. 9 [Wed May 8 06:08:12 2013] Vigneting correction estimate = 1.000000 [Wed May 8 06:08:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 06:08:12 2013] Assessing source extent using major [Wed May 8 06:08:12 2013] Source does appear to be extended [Wed May 8 06:08:12 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 07:00:50 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting [Wed May 8 07:00:50 2013] Initial guess for spatial extent in simple fitting = 7.52" [Wed May 8 07:00:50 2013] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.705 [Wed May 8 07:00:50 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.52" [Wed May 8 08:40:38 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass1_src3.ximg exists [Wed May 8 08:40:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass1_src3.csv [Wed May 8 08:40:38 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass1_src3_1.ximg exists [Wed May 8 08:40:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass1_src3.csv [Wed May 8 08:40:38 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0670120301_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0670120301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 08:40:38 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Wed May 8 08:40:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass1_tfrozen_src3.csv [Wed May 8 08:40:38 2013] fullrun_mos2_xmm0670120301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Wed May 8 08:40:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670120301_pi300-10000_cl_pass1_tfrozen_src3.csv [Wed May 8 08:40:38 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0670120301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0670120301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 08:40:52 2013] Source 10 is offset by 6.867606 and -6.238485 pixels which is larger than 2 X fitted extent = 3.772773 x 3.772773, not incorporating fit results [Wed May 8 08:40:52 2013] Vigneting correction estimate = 1.000000 [Wed May 8 08:40:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 08:40:52 2013] Assessing source extent using major [Wed May 8 08:40:52 2013] Source does appear to be extended [Wed May 8 08:40:52 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 10:29:59 2013] Counts = 1189.032715, rescaling region sizes by 2.000000 [Wed May 8 10:29:59 2013] XMMSAS src. selection expression = ellipse(28483.615692, 26394.367828, 1305.000000, 1305.000000, 0.000000, X, Y) [Wed May 8 10:29:59 2013] Writing source region out to fullrun_mos2_xmm0670120301_pi300-10000_pass1_cl_src10_src.reg [Wed May 8 10:29:59 2013] Extracting stamp from image fullrun_mos2_xmm0670120301_pi300-10000_cl_sm2.00.img.gz, (253, 229) - (403, 379) [Wed May 8 10:29:59 2013] XMMSAS bgd. selection expression = annulus(28483.615692, 26394.367828, 4350.000000, 8700.000000, X, Y) && !ellipse(27639.017200, 26924.302400, 1661.791248, 1578.304845, 22.513900, X, Y) && !ellipse(28692.197449, 27042.500305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36675.379364, 28852.537323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37447.873413, 19286.109665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20157.852000, 29588.223800, 461.669137, 461.669137, 0.000000, X, Y) && !ellipse(35821.628143, 19866.456589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19951.611343, 19880.435318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23105.766120, 20462.754200, 302.579209, 302.579209, 0.000000, X, Y) && !ellipse(20453.808600, 32037.133520, 566.751216, 566.751216, 0.000000, X, Y) && !ellipse(35421.950653, 20679.212830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24669.015625, 19954.161499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33523.413544, 22057.315079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34715.803131, 35707.857483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24178.106018, 20086.111145, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 8 10:29:59 2013] Writing fullrun_mos2_xmm0670120301_pi300-10000_pass1_cl_src10.gif [Wed May 8 10:39:19 2013] Mean detx,y = (31.22, 29.18) [Wed May 8 10:39:23 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 8 10:41:26 2013] Binned source spectrum to 10 counts/bin [Wed May 8 10:41:26 2013] Setting source spectrum file to fullrun_mos2_xmm0670120301_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Wed May 8 10:41:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0670120301_pi300-10000_pass1_cl_src10_bgd.pi.gz [Wed May 8 11:19:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 8 11:19:32 2013] rmf not generated due to insufficient counts [Wed May 8 12:32:06 2013] Updating aperture counts using extracted products [Wed May 8 12:32:06 2013] Total counts from fullrun_mos2_xmm0670120301_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 589488.00 [Wed May 8 12:32:06 2013] Total counts from fullrun_mos2_xmm0670120301_pi300-10000_pass1_cl_src10_bgd.pi.gz = 13116.00 [Wed May 8 12:32:06 2013] Got source and background scale factors 2239172.000000, 49720231.000000 [Wed May 8 12:32:06 2013] User source parameters: Position = (328.0, 303.9) = 22 54 2.88 -17 35 27.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 588897.3 +/- 768.8 Background aperture counts = 590.7 Rate = 5 +/- 0.006 [Wed May 8 12:32:06 2013] Updating counts from extracted products [Wed May 8 12:32:06 2013] Set source signif. to 588897.32/24.30 = 24230.46 [Wed May 8 12:32:13 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 12:32:13 2013] Using photon index=1.80, rate=4.64, arf fullrun_mos2_xmm0670120301_pi300-10000_pass1_cl_src10.arf [Wed May 8 12:32:13 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 12:32:13 2013] Updating source flux to 5.4e-11 [Wed May 8 12:32:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 12:32:26 2013] xmm0670120301/analysis//spectral/fullrun_mos2_xmm0670120301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete