[Tue Jun 11 02:02:02 2013] Detection parameters:
  Position = (421.1, 471.6) = 22 53 34.84 -17 23 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.0 +/- 14.1
  Background counts = 53.5
  Rate = 0.0006 +/- 0.0001

[Tue Jun 11 02:02:03 2013] Off-axis axis estimate = 15.39'
[Tue Jun 11 04:50:18 2013] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 04:50:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 11 04:50:18 2013] Initial guess for spatial extent in simple fitting = 14.12"
[Tue Jun 11 04:50:18 2013] source mask rpix=3.2, npix_max = 56, mask sum = 44, frac = 0.784
[Tue Jun 11 04:50:18 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 14.12"
[Tue Jun 11 08:13:40 2013] fullrun_mos2_xmm0670120201_pi300-10000_cl_pass0_src51.ximg exists
[Tue Jun 11 08:13:41 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0670120201_pi300-10000_cl_pass0_src51.csv
[Tue Jun 11 08:13:41 2013] fullrun_mos2_xmm0670120201_pi300-10000_cl_pass0_src51_1.ximg exists
[Tue Jun 11 08:13:41 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0670120201_pi300-10000_cl_pass0_src51.csv
[Tue Jun 11 08:13:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670120201_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670120201_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 08:13:41 2013] fullrun_mos2_xmm0670120201_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Tue Jun 11 08:13:41 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0670120201_pi300-10000_cl_pass0_tfrozen_src51.csv
[Tue Jun 11 08:13:41 2013] fullrun_mos2_xmm0670120201_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Tue Jun 11 08:13:41 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0670120201_pi300-10000_cl_pass0_tfrozen_src51.csv
[Tue Jun 11 08:13:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670120201_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670120201_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 08:13:59 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 18.532583 pixels away
[Tue Jun 11 08:13:59 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 08:13:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 08:13:59 2013] Assessing source extent using major
[Tue Jun 11 08:13:59 2013] Source does appear to be extended
[Tue Jun 11 08:13:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 08:13:59 2013] Deleting source due to low Poisson probability 0.9