[Tue Jun 11 02:01:26 2013] Detection parameters:
  Position = (372.2, 494.5) = 22 53 49.70 -17 21 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1157.2 +/- 41.6
  Background counts = 65.6
  Rate = 0.009 +/- 0.0003

[Tue Jun 11 02:01:26 2013] Off-axis axis estimate = 15.19'
[Tue Jun 11 03:35:07 2013] Using EEF radius (= 14.02 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 03:35:07 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 11 03:35:07 2013] Initial guess for spatial extent in simple fitting = 14.02"
[Tue Jun 11 03:35:07 2013] source mask rpix=3.2, npix_max = 55, mask sum = 51, frac = 0.920
[Tue Jun 11 03:35:07 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 14.02"
[Tue Jun 11 04:50:17 2013] fullrun_mos1_xmm0670120201_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun 11 04:50:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670120201_pi300-10000_cl_pass0_src2.csv
[Tue Jun 11 04:50:17 2013] fullrun_mos1_xmm0670120201_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun 11 04:50:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670120201_pi300-10000_cl_pass0_src2.csv
[Tue Jun 11 04:50:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670120201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670120201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 04:50:17 2013] fullrun_mos1_xmm0670120201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun 11 04:50:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670120201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jun 11 04:50:17 2013] fullrun_mos1_xmm0670120201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun 11 04:50:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670120201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jun 11 04:50:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670120201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670120201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 08:13:50 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 17.688957 pixels away
[Tue Jun 11 08:13:50 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 08:13:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 08:13:50 2013] Assessing source extent using major
[Tue Jun 11 08:13:50 2013] Source does appear to be extended
[Tue Jun 11 08:13:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 09:47:41 2013] Using EEF radius (= 14.02 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 09:47:41 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 11 09:47:41 2013] Initial guess for spatial extent in simple fitting = 14.02"
[Tue Jun 11 09:47:41 2013] source mask rpix=3.2, npix_max = 55, mask sum = 51, frac = 0.920
[Tue Jun 11 09:47:41 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 14.02"
[Tue Jun 11 10:27:56 2013] fullrun_mos1_xmm0670120201_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jun 11 10:27:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670120201_pi300-10000_cl_pass1_src2.csv
[Tue Jun 11 10:27:56 2013] fullrun_mos1_xmm0670120201_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jun 11 10:27:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670120201_pi300-10000_cl_pass1_src2.csv
[Tue Jun 11 10:27:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670120201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670120201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 10:27:57 2013] fullrun_mos1_xmm0670120201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jun 11 10:27:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670120201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jun 11 10:27:57 2013] fullrun_mos1_xmm0670120201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jun 11 10:27:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670120201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jun 11 10:27:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670120201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670120201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 15:10:54 2013] Spatial fit model total counts = 1975.440000, observed total counts = 1482.000000
[Tue Jun 11 15:10:54 2013] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 11 15:10:54 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 15:10:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 15:10:54 2013] Assessing source extent using major
[Tue Jun 11 15:10:54 2013] Source does appear to be extended
[Tue Jun 11 15:10:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 19:48:48 2013] Counts = 1157.190918, rescaling region sizes by 2.000000
[Tue Jun 11 19:48:48 2013] XMMSAS src. selection expression = ellipse(32334.945435, 42974.242554, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun 11 19:48:48 2013] Writing source region out to fullrun_mos1_xmm0670120201_pi300-10000_pass1_cl_src33_src.reg
[Tue Jun 11 19:48:48 2013] Extracting stamp from image fullrun_mos1_xmm0670120201_pi300-10000_cl_sm2.00.img.gz, (297, 420) - (447, 570)
[Tue Jun 11 19:48:48 2013] XMMSAS bgd. selection expression = annulus(32334.945435, 42974.242554, 4350.000000, 8700.000000, X, Y) && !ellipse(34761.905060, 35732.469604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35085.190400, 39548.013400, 494.253614, 265.747208, 20.393100, X, Y) && !ellipse(38554.741852, 37347.356659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36376.869110, 39347.570770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28758.862579, 37583.152466, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 11 19:48:48 2013] Writing fullrun_mos1_xmm0670120201_pi300-10000_pass1_cl_src33.gif
[Tue Jun 11 19:52:28 2013] Mean detx,y = (16502.13, -3062.15) 
[Tue Jun 11 19:52:30 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 19:53:25 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 19:53:26 2013] Setting source spectrum file to fullrun_mos1_xmm0670120201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Jun 11 19:53:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0670120201_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Jun 11 20:04:48 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 11 20:04:48 2013] rmf not generated due to insufficient counts
[Tue Jun 11 22:16:16 2013] Updating aperture counts using extracted products
[Tue Jun 11 22:16:16 2013] Total counts from fullrun_mos1_xmm0670120201_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 1867.00
[Tue Jun 11 22:16:17 2013] Total counts from fullrun_mos1_xmm0670120201_pi300-10000_pass1_cl_src33_bgd.pi.gz = 18573.00
[Tue Jun 11 22:16:17 2013] Got source and background scale factors 3054571.000000, 60734937.000000
[Tue Jun 11 22:16:17 2013] User source parameters:
  Position = (372.2, 494.5) = 22 53 49.70 -17 21 34.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 932.9 +/- 44.2
  Background aperture counts = 934.1
  Rate = 0.007 +/- 0.0003

[Tue Jun 11 22:16:17 2013] Updating counts from extracted products
[Tue Jun 11 22:16:17 2013] Set source signif. to 932.90/30.56 = 30.52
[Tue Jun 11 22:16:19 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 22:16:19 2013] Using photon index=1.80, rate=0.00721, arf fullrun_mos1_xmm0670120201_pi300-10000_pass1_cl_src33.arf
[Tue Jun 11 22:16:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 22:16:19 2013] Updating source flux to 2.5e-13
[Tue Jun 11 22:16:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 11 22:16:29 2013] xmm0670120201/analysis//spectral/fullrun_mos1_xmm0670120201_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete