[Wed May 15 01:01:26 2013] Detection parameters:
  Position = (399.5, 273.5) = 6 26 48.68 14 50 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.2 +/- 10.3
  Background counts = 11.9
  Rate = 0.003 +/- 0.0006

[Wed May 15 01:01:26 2013] Off-axis axis estimate = 7.55'
[Wed May 15 01:22:02 2013] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Wed May 15 01:22:02 2013] Initial guess for spatial extent in simple fitting = 10.20"
[Wed May 15 01:22:02 2013] source mask rpix=2.3, npix_max = 32, mask sum = 25, frac = 0.772
[Wed May 15 01:22:02 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.20"
[Wed May 15 01:34:24 2013] fullrun_mos1_xmm0670080301_pi300-10000_cl_pass0_src4.ximg exists
[Wed May 15 01:34:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670080301_pi300-10000_cl_pass0_src4.csv
[Wed May 15 01:34:24 2013] fullrun_mos1_xmm0670080301_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed May 15 01:34:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670080301_pi300-10000_cl_pass0_src4.csv
[Wed May 15 01:34:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670080301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670080301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 01:34:24 2013] fullrun_mos1_xmm0670080301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed May 15 01:34:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670080301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 15 01:34:24 2013] fullrun_mos1_xmm0670080301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May 15 01:34:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670080301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 15 01:34:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670080301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670080301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 01:51:07 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.872137 pixels away
[Wed May 15 01:51:07 2013] Vigneting correction estimate = 1.000000
[Wed May 15 01:51:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 01:51:07 2013] Assessing source extent using major
[Wed May 15 01:51:07 2013] Source does appear to be extended
[Wed May 15 01:51:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 02:06:42 2013] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Wed May 15 02:06:42 2013] Initial guess for spatial extent in simple fitting = 10.20"
[Wed May 15 02:06:42 2013] source mask rpix=2.3, npix_max = 32, mask sum = 25, frac = 0.772
[Wed May 15 02:06:42 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 10.20"
[Wed May 15 02:18:05 2013] fullrun_mos1_xmm0670080301_pi300-10000_cl_pass1_src4.ximg exists
[Wed May 15 02:18:05 2013] fullrun_mos1_xmm0670080301_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed May 15 02:18:05 2013] Fit fullrun_mos1_xmm0670080301_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed May 15 02:18:06 2013] fullrun_mos1_xmm0670080301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed May 15 02:18:06 2013] fullrun_mos1_xmm0670080301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed May 15 02:18:06 2013] Fit fullrun_mos1_xmm0670080301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed May 15 02:35:19 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.003170 pixels away
[Wed May 15 02:35:19 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 24.926468 pixels away
[Wed May 15 02:35:19 2013] Vigneting correction estimate = 1.000000
[Wed May 15 02:35:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 02:35:19 2013] Assessing source extent using major
[Wed May 15 02:35:19 2013] Source does appear to be extended
[Wed May 15 02:35:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 03:04:08 2013] XMMSAS src. selection expression = ellipse(34711.958649, 23746.626587, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 15 03:04:08 2013] Writing source region out to fullrun_mos1_xmm0670080301_pi300-10000_pass1_cl_src5_src.reg
[Wed May 15 03:04:08 2013] Extracting stamp from image fullrun_mos1_xmm0670080301_pi300-10000_cl_sm2.00.img.gz, (362, 236) - (437, 311)
[Wed May 15 03:04:08 2013] XMMSAS bgd. selection expression = annulus(34711.958649, 23746.626587, 1087.500000, 2175.000000, X, Y) && !ellipse(37330.327200, 24720.668400, 461.762413, 461.762413, 0.000000, X, Y)
[Wed May 15 03:04:08 2013] Writing fullrun_mos1_xmm0670080301_pi300-10000_pass1_cl_src5.gif
[Wed May 15 03:06:20 2013] Mean detx,y = (-4373.94, 7187.95) 
[Wed May 15 03:06:23 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 15 03:06:53 2013] Binned source spectrum to 10 counts/bin
[Wed May 15 03:06:53 2013] Setting source spectrum file to fullrun_mos1_xmm0670080301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed May 15 03:06:53 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0670080301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed May 15 03:13:21 2013] Not generating rmf since there are only 53 counts
[Wed May 15 03:13:21 2013] rmf not generated due to insufficient counts
[Wed May 15 03:28:04 2013] Updating aperture counts using extracted products
[Wed May 15 03:28:04 2013] Total counts from fullrun_mos1_xmm0670080301_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 111.00
[Wed May 15 03:28:04 2013] Total counts from fullrun_mos1_xmm0670080301_pi300-10000_pass1_cl_src5_bgd.pi.gz = 534.00
[Wed May 15 03:28:04 2013] Got source and background scale factors 1147308.000000, 9621089.000000
[Wed May 15 03:28:05 2013] User source parameters:
  Position = (399.5, 273.5) = 6 26 48.68 14 50 1.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 47.3 +/- 11.6
  Background aperture counts = 63.7
  Rate = 0.002 +/- 0.0005

[Wed May 15 03:28:05 2013] Updating counts from extracted products
[Wed May 15 03:28:05 2013] Set source signif. to 47.32/7.98 = 5.93
[Wed May 15 03:28:05 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 03:28:05 2013] Using photon index=1.80, rate=0.00185, arf fullrun_mos1_xmm0670080301_pi300-10000_pass1_cl_src5.arf
[Wed May 15 03:28:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 03:28:05 2013] Updating source flux to 3.8e-14
[Wed May 15 03:28:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 15 03:28:11 2013] xmm0670080301/analysis//spectral/fullrun_mos1_xmm0670080301_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete