[Sun Jun 16 08:12:13 2013] Detection parameters:
  Position = (378.1, 323.7) = 15 30 51.84 7 30 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.3 +/- 19.1
  Background counts = 73.0
  Rate = 0.009 +/- 0.001

[Sun Jun 16 08:12:14 2013] Off-axis axis estimate = 6.06'
[Sun Jun 16 08:17:12 2013] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 08:17:12 2013] Initial guess for spatial extent in simple fitting = 9.46"
[Sun Jun 16 08:17:12 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.049
[Sun Jun 16 08:17:12 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 9.46"
[Sun Jun 16 10:30:52 2013] fullrun_pn_xmm0670040601_pi300-10000_cl_pass0_src32.ximg exists
[Sun Jun 16 10:30:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670040601_pi300-10000_cl_pass0_src32.csv
[Sun Jun 16 10:30:52 2013] fullrun_pn_xmm0670040601_pi300-10000_cl_pass0_src32_1.ximg exists
[Sun Jun 16 10:30:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670040601_pi300-10000_cl_pass0_src32.csv
[Sun Jun 16 10:30:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670040601_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670040601_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 10:30:53 2013] fullrun_pn_xmm0670040601_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Sun Jun 16 10:30:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670040601_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sun Jun 16 10:30:53 2013] fullrun_pn_xmm0670040601_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Sun Jun 16 10:30:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670040601_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sun Jun 16 10:30:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670040601_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670040601_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 11:59:03 2013] Spatial fit model total counts = 390.798000, observed total counts = 391.000000
[Sun Jun 16 11:59:03 2013] Offset between fit and detection position for source 33 = 0.493770 pixels
[Sun Jun 16 11:59:03 2013] Warning, changing simple spatial fit ID from 32 to 29
[Sun Jun 16 11:59:03 2013] 390.239500 total counts/ 378.758000 bgd. counts: snr = 0.589953
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.493770 pixels
  Position = (378.5, 324.0) = 15 30 51.71 7 30 36.1
  Extent = 3.9 (2.5-6.7)", rotation angle = 0
  Source counts = 11.5 +/- 19.8
  Background counts = 378.8
  Rate = 0.0007 +/- 0.001
  Deleting source due to low Poisson probability