[Thu Jul 4 13:47:57 2013] Detection parameters: Position = (336.4, 316.9) = 17 45 32.02 -29 0 36.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 346.8 +/- 41.2 Background counts = 593.1 Rate = 0.008 +/- 0.0009 [Thu Jul 4 13:47:58 2013] Off-axis axis estimate = 3.06' [Thu Jul 4 13:48:36 2013] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting [Thu Jul 4 13:48:36 2013] Initial guess for spatial extent in simple fitting = 7.96" [Thu Jul 4 13:48:36 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.921 [Thu Jul 4 13:48:36 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 7.96" [Thu Jul 4 13:48:37 2013] fullrun_pn_xmm0658600201_pi300-10000_cl_pass0_src40.ximg exists [Thu Jul 4 13:48:37 2013] fullrun_pn_xmm0658600201_pi300-10000_cl_pass0_src40_1.ximg exists [Thu Jul 4 13:48:37 2013] Fit fullrun_pn_xmm0658600201_pi300-10000_cl_pass0_src40 appears to have run properly [Thu Jul 4 13:48:38 2013] fullrun_pn_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src40.ximg exists [Thu Jul 4 13:48:38 2013] fullrun_pn_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists [Thu Jul 4 13:48:38 2013] Fit fullrun_pn_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly [Thu Jul 4 13:48:54 2013] Spatial fit model total counts = 5075.440000, observed total counts = 5074.000000 [Thu Jul 4 13:48:54 2013] Offset between fit and detection position for source 45 = 1.844250 pixels [Thu Jul 4 13:48:54 2013] 5047.608000 total counts/ 4750.640000 bgd. counts: snr = 4.308574 Spatial fit parameters: Offset between fit and detection position for source 45 = 1.844250 pixels Position = (334.6, 316.7) = 17 45 32.63 -29 0 34.4 Extent = 15.9 (15.9-31.8)", rotation angle = 0 Source counts = 297.0 +/- 71.0 Background counts = 4750.6 Rate = 0.007 +/- 0.002 [Thu Jul 4 13:48:54 2013] Vigneting correction estimate = 1.000000 [Thu Jul 4 13:48:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jul 4 13:48:54 2013] Assessing source extent using major axis lower bound [Thu Jul 4 13:48:54 2013] Source does appear to be extended [Thu Jul 4 13:48:54 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jul 4 13:48:54 2013] Source is confused with source 69 [Thu Jul 4 13:49:28 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Jul 4 13:49:28 2013] Initial guess for spatial extent in simple fitting = 15.92" [Thu Jul 4 13:49:28 2013] source mask rpix=3.7, npix_max = 69, mask sum = 72, frac = 1.041 [Thu Jul 4 13:49:28 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 15.92" [Thu Jul 4 13:49:29 2013] fullrun_pn_xmm0658600201_pi300-10000_cl_pass1_src37.ximg exists [Thu Jul 4 13:49:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658600201_pi300-10000_cl_pass1_src37.csv [Thu Jul 4 13:49:29 2013] fullrun_pn_xmm0658600201_pi300-10000_cl_pass1_src37_1.ximg exists [Thu Jul 4 13:49:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658600201_pi300-10000_cl_pass1_src37.csv [Thu Jul 4 13:49:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0658600201_pi300-10000_cl_pass1_src37_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0658600201_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jul 4 13:49:30 2013] fullrun_pn_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists [Thu Jul 4 13:49:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src37.csv [Thu Jul 4 13:49:30 2013] fullrun_pn_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists [Thu Jul 4 13:49:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src37.csv [Thu Jul 4 13:49:30 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jul 4 13:49:45 2013] Warning, spatial fit 37 centroid is now closest to src. 12 [Thu Jul 4 13:49:45 2013] Vigneting correction estimate = 1.000000 [Thu Jul 4 13:49:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jul 4 13:49:45 2013] Assessing source extent using major axis lower bound [Thu Jul 4 13:49:45 2013] Source does appear to be extended [Thu Jul 4 13:49:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jul 4 13:50:15 2013] XMMSAS src. selection expression = ellipse(29058.666600, 27507.477000, 955.026027, 955.026027, 0.000000, X, Y) [Thu Jul 4 13:50:15 2013] Not overwriting source region fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45_src.reg [Thu Jul 4 13:50:15 2013] Extracting stamp from image fullrun_pn_xmm0658600201_pi300-10000_cl_sm2.00.img.gz, (280, 262) - (389, 372) [Thu Jul 4 13:50:15 2013] XMMSAS bgd. selection expression = annulus(29058.666600, 27507.477000, 1591.710046, 3183.420092, X, Y) && !ellipse(27107.306700, 27662.052200, 908.432026, 785.432823, 54.673400, X, Y) && !ellipse(25701.570962, 30024.928600, 393.400011, 393.400011, 0.000000, X, Y) && !ellipse(25926.134827, 28917.219147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26225.234497, 27957.707489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25701.652100, 29444.959320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.590088, 28958.510162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27618.638548, 26117.722400, 582.417617, 582.417617, 0.000000, X, Y) && !ellipse(26650.002014, 29612.650970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29992.867096, 29714.872253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28962.954681, 28963.119293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30718.229065, 27601.338837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28340.514923, 26663.943573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26893.574402, 26058.493347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26016.705800, 25955.678000, 1061.648031, 511.476815, 96.145900, X, Y) && !ellipse(26353.514000, 25591.266000, 1094.472031, 442.024013, 356.108990, X, Y) && !ellipse(29229.402802, 30047.263336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30965.545044, 29677.505371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29787.341278, 28010.346100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29097.461400, 24665.280400, 907.464026, 283.343208, 106.627500, X, Y) [Thu Jul 4 13:50:15 2013] Writing fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45.gif [Thu Jul 4 13:50:21 2013] ../../xmm0658600201/products/events/fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45_src.evt and ../../xmm0658600201/products/events/fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45_bgd.evt exist, delete to re-create [Thu Jul 4 13:50:21 2013] Mean detx,y = (1972.93, -119.70) [Thu Jul 4 13:50:21 2013] ../../xmm0658600201/products/images/fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45_src.img and ../../xmm0658600201/products/images/fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45_bgd.img exist, delete to re-create [Thu Jul 4 13:50:21 2013] ../../xmm0658600201/products/spectra/fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45_src_b10.pi.gz and ../../xmm0658600201/products/spectra/fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45_bgd.pi exist, delete to re-create [Thu Jul 4 13:50:21 2013] Setting source spectrum file to fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45_src_b10.pi.gz [Thu Jul 4 13:50:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45_bgd.pi.gz [Thu Jul 4 13:50:21 2013] ../../xmm0658600201/products/lightcurves/fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45_src.lc and ../../xmm0658600201/products/lightcurves/fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45_bgd.lc exist, delete to re-create [Thu Jul 4 13:50:32 2013] fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45.rmf exists, delete to re-create [Thu Jul 4 13:50:32 2013] fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45.arf exists, delete to re-create [Thu Jul 4 15:44:39 2013] Updating aperture counts using extracted products [Thu Jul 4 15:44:39 2013] Total counts from fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 7818.00 [Thu Jul 4 15:44:39 2013] Total counts from fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45_bgd.pi.gz = 12689.00 [Thu Jul 4 15:44:39 2013] Got source and background scale factors 2804568.000000, 7970237.000000 [Thu Jul 4 15:44:39 2013] User source parameters: Position = (334.6, 316.7) = 17 45 32.63 -29 0 34.4 Extent = 15.9 (15.9-31.8)", rotation angle = 0 Source aperture counts = 3353.0 +/- 89.4 Background aperture counts = 4465.0 Rate = 0.08 +/- 0.002 [Thu Jul 4 15:44:44 2013] Calculating source flux in energy range 0.30-8.00 [Thu Jul 4 15:44:44 2013] Using photon index=1.80, rate=0.00736, arf fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45.arf [Thu Jul 4 15:44:44 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jul 4 15:44:44 2013] Updating source flux to 4.1e-14 [Thu Jul 4 15:45:31 2013] Flag c found in src. 45 procflags, skipping spectral fitting [Thu Jul 4 15:45:41 2013] xmm0658600201/analysis//spectral/fullrun_pn_xmm0658600201_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete