[Thu Jul  4 13:48:01 2013] Detection parameters:
  Position = (365.0, 120.5) = 17 45 22.48 -29 14 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.0 +/- 15.2
  Background counts = 40.4
  Rate = 0.002 +/- 0.0003

[Thu Jul  4 13:48:04 2013] Off-axis axis estimate = 13.77'
[Thu Jul  4 13:48:40 2013] Using EEF radius (= 13.32 ")to estimate initial spatial extent for simple fitting
[Thu Jul  4 13:48:40 2013] Initial guess for spatial extent in simple fitting = 13.32"
[Thu Jul  4 13:48:40 2013] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.104
[Thu Jul  4 13:48:40 2013] Giving source the simple spatial ID 81 for pass 0, mean size = 13.32"
[Thu Jul  4 13:48:41 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_src81.ximg exists
[Thu Jul  4 13:48:41 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_src81_1.ximg exists
[Thu Jul  4 13:48:41 2013] Fit fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_src81 appears to have run properly
[Thu Jul  4 13:48:42 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Thu Jul  4 13:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src81.csv
[Thu Jul  4 13:48:42 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Thu Jul  4 13:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src81.csv
[Thu Jul  4 13:48:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 13:49:12 2013] Spatial fit model total counts = 634.732000, observed total counts = 648.000000
[Thu Jul  4 13:49:12 2013] Offset between fit and detection position for source 23 = 1.186858 pixels
[Thu Jul  4 13:49:12 2013] 514.185000 total counts/ 285.866000 bgd. counts: snr = 13.503949
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.186858 pixels
  Position = (365.0, 119.3) = 17 45 22.49 -29 14 53.0
  Extent = 26.6 (26.6-26.6)" x 7.7 (5.8-10.6)", rotation angle = 2 (356-9) degrees
  Source counts = 228.3 +/- 22.7
  Background counts = 285.9
  Rate = 0.004 +/- 0.0004
[Thu Jul  4 13:49:12 2013] Vigneting correction estimate = 1.000000
[Thu Jul  4 13:49:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  4 13:49:12 2013] Assessing source extent using major axis lower bound
[Thu Jul  4 13:49:12 2013] Source does appear to be extended
[Thu Jul  4 13:49:12 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.52
[Thu Jul  4 13:49:12 2013] Source is asymmetric
[Thu Jul  4 13:49:12 2013] Source is confused with source 20
[Thu Jul  4 13:49:32 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  4 13:49:32 2013] Initial guess for spatial extent in simple fitting = 17.18"
[Thu Jul  4 13:49:32 2013] source mask rpix=3.9, npix_max = 79, mask sum = 56, frac = 0.707
[Thu Jul  4 13:49:32 2013] Giving source the simple spatial ID 70 for pass 1, mean size = 17.18"
[Thu Jul  4 13:49:33 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_src70.ximg exists
[Thu Jul  4 13:49:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_src70.csv
[Thu Jul  4 13:49:33 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_src70_1.ximg exists
[Thu Jul  4 13:49:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_src70.csv
[Thu Jul  4 13:49:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 13:49:34 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Thu Jul  4 13:49:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src70.csv
[Thu Jul  4 13:49:34 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Thu Jul  4 13:49:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src70.csv
[Thu Jul  4 13:49:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 13:49:59 2013] Spatial fit model total counts = 1009.810000, observed total counts = 791.000000
[Thu Jul  4 13:49:59 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul  4 13:49:59 2013] Vigneting correction estimate = 1.000000
[Thu Jul  4 13:49:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  4 13:49:59 2013] Assessing source extent using major axis lower bound
[Thu Jul  4 13:49:59 2013] Source does appear to be extended
[Thu Jul  4 13:49:59 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.52
[Thu Jul  4 13:49:59 2013] Source is asymmetric
[Thu Jul  4 13:50:38 2013] XMMSAS src. selection expression = ellipse(31705.880000, 10332.458000, 1597.824046, 463.750213, 1.837970, X, Y)
[Thu Jul  4 13:50:38 2013] Not overwriting source region fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src23_src.reg
[Thu Jul  4 13:50:38 2013] Extracting stamp from image fullrun_mos2_xmm0658600201_pi300-10000_cl_sm2.00.img.gz, (273, 27) - (457, 211)
[Thu Jul  4 13:50:38 2013] XMMSAS bgd. selection expression = annulus(31705.880000, 10332.458000, 2663.040077, 5326.080153, X, Y) && !ellipse(28173.235800, 12031.168600, 987.512028, 261.096808, 49.576950, X, Y) && !ellipse(25921.618622, 10730.630875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26196.386000, 11187.922000, 2040.896059, 799.286423, 306.017500, X, Y) && !ellipse(29181.508728, 10370.404465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27551.506592, 10533.526810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30546.207062, 12630.275131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31380.126000, 10367.568400, 2115.424061, 676.288019, 3.306050, X, Y) && !ellipse(26177.287323, 11594.672989, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul  4 13:50:38 2013] Writing fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src23.gif
[Thu Jul  4 13:52:45 2013] Mean detx,y = (-4458.57, -17080.88) 
[Thu Jul  4 13:52:46 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  4 13:53:09 2013] Binned source spectrum to 10 counts/bin
[Thu Jul  4 13:53:09 2013] Setting source spectrum file to fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Jul  4 13:53:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Jul  4 15:44:55 2013] Updating aperture counts using extracted products
[Thu Jul  4 15:44:55 2013] Total counts from fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 503.00
[Thu Jul  4 15:44:55 2013] Total counts from fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src23_bgd.pi.gz = 6773.00
[Thu Jul  4 15:44:55 2013] Got source and background scale factors 1347297.000000, 21745313.000000
[Thu Jul  4 15:44:55 2013] User source parameters:
  Position = (365.0, 119.3) = 17 45 22.49 -29 14 53.0
  Extent = 26.6 (26.6-26.6)" x 7.7 (5.8-10.6)", rotation angle = 2 (356-9) degrees
  Source aperture counts = 83.4 +/- 23.4
  Background aperture counts = 419.6
  Rate = 0.002 +/- 0.0004

[Thu Jul  4 15:44:57 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jul  4 15:44:57 2013] Using photon index=1.80, rate=0.00432, arf fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src23.arf
[Thu Jul  4 15:44:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  4 15:44:57 2013] Updating source flux to 3.1e-13
[Thu Jul  4 15:45:13 2013] Flag p found in src. 23 procflags, skipping spectral fitting
[Thu Jul  4 15:45:13 2013] Flag c found in src. 23 procflags, skipping spectral fitting
[Thu Jul  4 15:45:31 2013] xmm0658600201/analysis//spectral/fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete