[Thu Jul  4 13:48:01 2013] Detection parameters:
  Position = (358.5, 120.9) = 17 45 24.65 -29 14 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.3 +/- 16.7
  Background counts = 40.2
  Rate = 0.002 +/- 0.0003

[Thu Jul  4 13:48:04 2013] Off-axis axis estimate = 13.59'
[Thu Jul  4 13:48:40 2013] Using EEF radius (= 13.22 ")to estimate initial spatial extent for simple fitting
[Thu Jul  4 13:48:40 2013] Initial guess for spatial extent in simple fitting = 13.22"
[Thu Jul  4 13:48:40 2013] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.978
[Thu Jul  4 13:48:40 2013] Giving source the simple spatial ID 68 for pass 0, mean size = 13.22"
[Thu Jul  4 13:48:41 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_src68.ximg exists
[Thu Jul  4 13:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_src68.csv
[Thu Jul  4 13:48:41 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_src68_1.ximg exists
[Thu Jul  4 13:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_src68.csv
[Thu Jul  4 13:48:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 13:48:42 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Thu Jul  4 13:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src68.csv
[Thu Jul  4 13:48:42 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Thu Jul  4 13:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src68.csv
[Thu Jul  4 13:48:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 13:49:12 2013] Spatial fit model total counts = 888.056000, observed total counts = 685.000000
[Thu Jul  4 13:49:12 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul  4 13:49:12 2013] Vigneting correction estimate = 1.000000
[Thu Jul  4 13:49:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  4 13:49:12 2013] Assessing source extent using major
[Thu Jul  4 13:49:12 2013] Source does appear to be extended
[Thu Jul  4 13:49:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  4 13:49:12 2013] Source is confused with source 23
[Thu Jul  4 13:49:32 2013] Using EEF radius (= 13.22 ")to estimate initial spatial extent for simple fitting
[Thu Jul  4 13:49:32 2013] Initial guess for spatial extent in simple fitting = 13.22"
[Thu Jul  4 13:49:32 2013] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.978
[Thu Jul  4 13:49:32 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 13.22"
[Thu Jul  4 13:49:33 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_src59.ximg exists
[Thu Jul  4 13:49:33 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_src59_1.ximg exists
[Thu Jul  4 13:49:33 2013] Fit fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_src59 appears to have run properly
[Thu Jul  4 13:49:34 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Thu Jul  4 13:49:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src59.csv
[Thu Jul  4 13:49:34 2013] fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Thu Jul  4 13:49:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src59.csv
[Thu Jul  4 13:49:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 13:49:59 2013] Spatial fit model total counts = 707.858000, observed total counts = 685.000000
[Thu Jul  4 13:49:59 2013] Offset between fit and detection position for source 20 = 3.024712 pixels
[Thu Jul  4 13:49:59 2013] 689.270000 total counts/ 415.690000 bgd. counts: snr = 13.418364
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 3.024712 pixels
  Position = (361.2, 119.7) = 17 45 23.73 -29 14 51.3
  Extent = 26.4 (26.4-52.9)" x 8.5 (6.4-12.5)", rotation angle = 3 (357-9) degrees
  Source counts = 273.6 +/- 26.3
  Background counts = 415.7
  Rate = 0.005 +/- 0.0005
[Thu Jul  4 13:49:59 2013] Vigneting correction estimate = 1.000000
[Thu Jul  4 13:49:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  4 13:49:59 2013] Assessing source extent using major axis lower bound
[Thu Jul  4 13:49:59 2013] Source does appear to be extended
[Thu Jul  4 13:49:59 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.10
[Thu Jul  4 13:49:59 2013] Source is asymmetric
[Thu Jul  4 13:50:38 2013] XMMSAS src. selection expression = ellipse(31380.126000, 10367.568400, 1586.568046, 507.216015, 3.306050, X, Y)
[Thu Jul  4 13:50:38 2013] Not overwriting source region fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20_src.reg
[Thu Jul  4 13:50:38 2013] Extracting stamp from image fullrun_mos2_xmm0658600201_pi300-10000_cl_sm2.00.img.gz, (270, 29) - (452, 211)
[Thu Jul  4 13:50:38 2013] XMMSAS bgd. selection expression = annulus(31380.126000, 10367.568400, 2644.280076, 5288.560152, X, Y) && !ellipse(28173.235800, 12031.168600, 987.512028, 261.096808, 49.576950, X, Y) && !ellipse(25921.618622, 10730.630875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26196.386000, 11187.922000, 2040.896059, 799.286423, 306.017500, X, Y) && !ellipse(29181.508728, 10370.404465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25303.880920, 13809.149292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27551.506592, 10533.526810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30546.207062, 12630.275131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26177.287323, 11594.672989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31705.880000, 10332.458000, 2130.432061, 618.333618, 1.837970, X, Y)
[Thu Jul  4 13:50:38 2013] Writing fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20.gif
[Thu Jul  4 13:50:40 2013] ../../xmm0658600201/products/events/fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0658600201/products/events/fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create
[Thu Jul  4 13:50:40 2013] Mean detx,y = (-4367.62, -17038.50) 
[Thu Jul  4 13:50:40 2013] ../../xmm0658600201/products/images/fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20_src.img and ../../xmm0658600201/products/images/fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create
[Thu Jul  4 13:50:40 2013] ../../xmm0658600201/products/spectra/fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20_src_b10.pi.gz and ../../xmm0658600201/products/spectra/fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create
[Thu Jul  4 13:50:40 2013] Setting source spectrum file to fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Jul  4 13:50:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Jul  4 13:50:40 2013] ../../xmm0658600201/products/lightcurves/fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0658600201/products/lightcurves/fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create
[Thu Jul  4 15:44:54 2013] Updating aperture counts using extracted products
[Thu Jul  4 15:44:54 2013] Total counts from fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 611.00
[Thu Jul  4 15:44:54 2013] Total counts from fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20_bgd.pi.gz = 6901.00
[Thu Jul  4 15:44:54 2013] Got source and background scale factors 1676924.000000, 21740027.000000
[Thu Jul  4 15:44:54 2013] User source parameters:
  Position = (361.2, 119.7) = 17 45 23.73 -29 14 51.3
  Extent = 26.4 (26.4-52.9)" x 8.5 (6.4-12.5)", rotation angle = 3 (357-9) degrees
  Source aperture counts = 78.7 +/- 25.7
  Background aperture counts = 532.3
  Rate = 0.001 +/- 0.0005

[Thu Jul  4 15:44:57 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jul  4 15:44:57 2013] Using photon index=1.80, rate=0.00517, arf fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20.arf
[Thu Jul  4 15:44:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  4 15:44:57 2013] Updating source flux to 3.7e-13
[Thu Jul  4 15:45:13 2013] Flag p found in src. 20 procflags, skipping spectral fitting
[Thu Jul  4 15:45:13 2013] Flag c found in src. 20 procflags, skipping spectral fitting
[Thu Jul  4 15:45:31 2013] xmm0658600201/analysis//spectral/fullrun_mos2_xmm0658600201_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete