[Thu Jul  4 13:47:59 2013] Detection parameters:
  Position = (250.1, 369.1) = 17 46 0.62 -28 56 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.9 +/- 19.9
  Background counts = 148.3
  Rate = 0.002 +/- 0.0006

[Thu Jul  4 13:48:00 2013] Off-axis axis estimate = 6.20'
[Thu Jul  4 13:48:38 2013] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Thu Jul  4 13:48:38 2013] Initial guess for spatial extent in simple fitting = 9.53"
[Thu Jul  4 13:48:38 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.243
[Thu Jul  4 13:48:38 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 9.53"
[Thu Jul  4 13:48:39 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_src33.ximg exists
[Thu Jul  4 13:48:39 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Jul  4 13:48:39 2013] Fit fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_src33 appears to have run properly
[Thu Jul  4 13:48:40 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Jul  4 13:48:40 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Jul  4 13:48:40 2013] Fit fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Thu Jul  4 13:49:00 2013] Spatial fit model total counts = 1632.700000, observed total counts = 1634.000000
[Thu Jul  4 13:49:00 2013] Offset between fit and detection position for source 29 = 2.229362 pixels
[Thu Jul  4 13:49:00 2013] 1625.013000 total counts/ 1358.170000 bgd. counts: snr = 7.240670
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 2.229362 pixels
  Position = (248.0, 369.7) = 17 46 1.33 -28 56 44.1
  Extent = 14.6 (9.1-19.1)", rotation angle = 0
  Source counts = 266.8 +/- 40.3
  Background counts = 1358.2
  Rate = 0.005 +/- 0.0008
[Thu Jul  4 13:49:00 2013] Vigneting correction estimate = 1.000000
[Thu Jul  4 13:49:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  4 13:49:00 2013] Assessing source extent using major axis lower bound
[Thu Jul  4 13:49:00 2013] Source does appear to be extended
[Thu Jul  4 13:49:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  4 13:49:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  4 13:49:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  4 13:49:31 2013] Initial guess for spatial extent in simple fitting = 14.62"
[Thu Jul  4 13:49:31 2013] source mask rpix=3.4, npix_max = 59, mask sum = 64, frac = 1.074
[Thu Jul  4 13:49:31 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 14.62"
[Thu Jul  4 13:49:31 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_src28.ximg exists
[Thu Jul  4 13:49:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_src28.csv
[Thu Jul  4 13:49:31 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_src28_1.ximg exists
[Thu Jul  4 13:49:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_src28.csv
[Thu Jul  4 13:49:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 13:49:32 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Thu Jul  4 13:49:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src28.csv
[Thu Jul  4 13:49:32 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Jul  4 13:49:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src28.csv
[Thu Jul  4 13:49:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 13:49:49 2013] Spatial fit model total counts = 2601.600000, observed total counts = 2308.000000
[Thu Jul  4 13:49:49 2013] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul  4 13:49:49 2013] Vigneting correction estimate = 1.000000
[Thu Jul  4 13:49:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  4 13:49:49 2013] Assessing source extent using major axis lower bound
[Thu Jul  4 13:49:49 2013] Source does appear to be extended
[Thu Jul  4 13:49:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  4 13:50:32 2013] XMMSAS src. selection expression = ellipse(21524.793200, 32111.684600, 877.002025, 877.002025, 0.000000, X, Y)
[Thu Jul  4 13:50:32 2013] Not overwriting source region fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29_src.reg
[Thu Jul  4 13:50:32 2013] Extracting stamp from image fullrun_mos1_xmm0658600201_pi300-10000_cl_sm2.00.img.gz, (198, 319) - (298, 420)
[Thu Jul  4 13:50:32 2013] XMMSAS bgd. selection expression = annulus(21524.793200, 32111.684600, 1461.670042, 2923.340084, X, Y) && !ellipse(26328.842000, 27949.880000, 2194.440063, 1461.544042, 32.708600, X, Y) && !ellipse(25679.172800, 29912.146000, 1270.144037, 495.588814, 98.146270, X, Y) && !ellipse(19899.501083, 28394.186340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17790.414841, 30702.083832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23065.868600, 32456.877600, 1468.696042, 429.511212, 312.302100, X, Y) && !ellipse(24349.849600, 34862.069600, 968.712028, 255.692007, 307.286708, X, Y) && !ellipse(24191.875000, 32145.920624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23549.209229, 32737.108032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18921.173233, 35671.241974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17900.600000, 36593.102100, 1911.232055, 963.336028, 43.298900, X, Y) && !ellipse(15752.806000, 36418.414000, 2895.048083, 635.141618, 318.751200, X, Y)
[Thu Jul  4 13:50:32 2013] Writing fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29.gif
[Thu Jul  4 13:50:33 2013] ../../xmm0658600201/products/events/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0658600201/products/events/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Thu Jul  4 13:50:33 2013] Mean detx,y = (4741.47, -5789.64) 
[Thu Jul  4 13:50:33 2013] ../../xmm0658600201/products/images/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29_src.img and ../../xmm0658600201/products/images/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Thu Jul  4 13:50:33 2013] ../../xmm0658600201/products/spectra/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0658600201/products/spectra/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Thu Jul  4 13:50:33 2013] Setting source spectrum file to fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu Jul  4 13:50:33 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Thu Jul  4 13:50:33 2013] ../../xmm0658600201/products/lightcurves/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0658600201/products/lightcurves/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Thu Jul  4 13:50:37 2013] fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29.rmf exists, delete to re-create
[Thu Jul  4 13:50:37 2013] fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29.arf exists, delete to re-create
[Thu Jul  4 15:44:46 2013] Updating aperture counts using extracted products
[Thu Jul  4 15:44:46 2013] Total counts from fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 1970.00
[Thu Jul  4 15:44:47 2013] Total counts from fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29_bgd.pi.gz = 10641.00
[Thu Jul  4 15:44:47 2013] Got source and background scale factors 2308024.000000, 14624125.000000
[Thu Jul  4 15:44:47 2013] User source parameters:
  Position = (248.0, 369.7) = 17 46 1.33 -28 56 44.1
  Extent = 14.6 (9.1-19.1)", rotation angle = 0
  Source aperture counts = 290.6 +/- 45.4
  Background aperture counts = 1679.4
  Rate = 0.005 +/- 0.0009

[Thu Jul  4 15:44:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jul  4 15:44:48 2013] Using photon index=1.80, rate=0.00505, arf fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29.arf
[Thu Jul  4 15:44:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  4 15:44:48 2013] Updating source flux to 1.2e-13
[Thu Jul  4 15:45:00 2013] Flag p found in src. 29 procflags, skipping spectral fitting
[Thu Jul  4 15:45:13 2013] xmm0658600201/analysis//spectral/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete