[Thu Jul  4 13:47:59 2013] Detection parameters:
  Position = (393.7, 374.1) = 17 45 13.04 -28 56 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.8 +/- 16.4
  Background counts = 67.4
  Rate = 0.003 +/- 0.0005

[Thu Jul  4 13:48:00 2013] Off-axis axis estimate = 8.82'
[Thu Jul  4 13:48:38 2013] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Thu Jul  4 13:48:38 2013] Initial guess for spatial extent in simple fitting = 10.84"
[Thu Jul  4 13:48:38 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.006
[Thu Jul  4 13:48:38 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 10.84"
[Thu Jul  4 13:48:39 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_src26.ximg exists
[Thu Jul  4 13:48:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_src26.csv
[Thu Jul  4 13:48:39 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu Jul  4 13:48:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_src26.csv
[Thu Jul  4 13:48:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 13:48:40 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu Jul  4 13:48:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Jul  4 13:48:40 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Jul  4 13:48:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Jul  4 13:48:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0658600201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 13:49:00 2013] Spatial fit model total counts = 882.200000, observed total counts = 659.000000
[Thu Jul  4 13:49:00 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul  4 13:49:00 2013] Vigneting correction estimate = 1.000000
[Thu Jul  4 13:49:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  4 13:49:00 2013] Assessing source extent using major
[Thu Jul  4 13:49:00 2013] Source does appear to be extended
[Thu Jul  4 13:49:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  4 13:49:31 2013] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Thu Jul  4 13:49:31 2013] Initial guess for spatial extent in simple fitting = 10.84"
[Thu Jul  4 13:49:31 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.006
[Thu Jul  4 13:49:31 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 10.84"
[Thu Jul  4 13:49:31 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_src23.ximg exists
[Thu Jul  4 13:49:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_src23.csv
[Thu Jul  4 13:49:31 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Jul  4 13:49:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_src23.csv
[Thu Jul  4 13:49:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 13:49:32 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Jul  4 13:49:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Thu Jul  4 13:49:32 2013] fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Jul  4 13:49:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Thu Jul  4 13:49:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0658600201_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 13:49:49 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 10.952531 pixels away
[Thu Jul  4 13:49:49 2013] Vigneting correction estimate = 1.000000
[Thu Jul  4 13:49:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  4 13:49:49 2013] Assessing source extent using major
[Thu Jul  4 13:49:49 2013] Source does appear to be extended
[Thu Jul  4 13:49:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  4 13:50:32 2013] XMMSAS src. selection expression = ellipse(34204.351562, 32497.895203, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul  4 13:50:32 2013] Not overwriting source region fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27_src.reg
[Thu Jul  4 13:50:32 2013] Extracting stamp from image fullrun_mos1_xmm0658600201_pi300-10000_cl_sm2.00.img.gz, (356, 337) - (431, 412)
[Thu Jul  4 13:50:32 2013] XMMSAS bgd. selection expression = annulus(34204.351562, 32497.895203, 1087.500000, 2175.000000, X, Y)
[Thu Jul  4 13:50:32 2013] Writing fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27.gif
[Thu Jul  4 13:50:33 2013] ../../xmm0658600201/products/events/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0658600201/products/events/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Thu Jul  4 13:50:33 2013] Mean detx,y = (5156.03, 6922.05) 
[Thu Jul  4 13:50:33 2013] ../../xmm0658600201/products/images/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27_src.img and ../../xmm0658600201/products/images/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Thu Jul  4 13:50:33 2013] ../../xmm0658600201/products/spectra/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0658600201/products/spectra/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Thu Jul  4 13:50:33 2013] Setting source spectrum file to fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Jul  4 13:50:33 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu Jul  4 13:50:33 2013] ../../xmm0658600201/products/lightcurves/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0658600201/products/lightcurves/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Thu Jul  4 13:50:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul  4 13:50:37 2013] rmf not generated due to insufficient counts
[Thu Jul  4 13:50:37 2013] fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27.arf exists, delete to re-create
[Thu Jul  4 15:44:46 2013] Updating aperture counts using extracted products
[Thu Jul  4 15:44:46 2013] Total counts from fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 502.00
[Thu Jul  4 15:44:46 2013] Total counts from fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27_bgd.pi.gz = 3436.00
[Thu Jul  4 15:44:46 2013] Got source and background scale factors 1095706.000000, 9327420.000000
[Thu Jul  4 15:44:46 2013] User source parameters:
  Position = (393.7, 374.1) = 17 45 13.04 -28 56 22.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 98.4 +/- 23.4
  Background aperture counts = 403.6
  Rate = 0.002 +/- 0.0004

[Thu Jul  4 15:44:46 2013] Updating counts from extracted products
[Thu Jul  4 15:44:46 2013] Set source signif. to 98.37/20.09 = 4.90
[Thu Jul  4 15:44:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jul  4 15:44:48 2013] Using photon index=1.80, rate=0.00186, arf fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27.arf
[Thu Jul  4 15:44:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  4 15:44:48 2013] Updating source flux to 4.8e-14
[Thu Jul  4 15:45:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jul  4 15:45:13 2013] xmm0658600201/analysis//spectral/fullrun_mos1_xmm0658600201_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete