[Sat Jun 8 19:50:16 2013] Detection parameters: Position = (135.0, 333.6) = 6 20 49.38 -70 57 55.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 76.4 +/- 15.9 Background counts = 65.3 Rate = 0.002 +/- 0.0003 [Sat Jun 8 19:50:17 2013] Off-axis axis estimate = 12.12' [Sat Jun 8 19:53:55 2013] Using EEF radius (= 12.49 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 19:53:55 2013] Initial guess for spatial extent in simple fitting = 12.49" [Sat Jun 8 19:53:55 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.924 [Sat Jun 8 19:53:55 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 12.49" [Sat Jun 8 22:15:09 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src51.ximg exists [Sat Jun 8 22:15:09 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src51.csv [Sat Jun 8 22:15:09 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src51_1.ximg exists [Sat Jun 8 22:15:09 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src51.csv [Sat Jun 8 22:15:09 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src51_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 22:15:10 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src51.ximg exists [Sat Jun 8 22:15:10 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src51.csv [Sat Jun 8 22:15:10 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists [Sat Jun 8 22:15:10 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src51.csv [Sat Jun 8 22:15:10 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src51_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 23:35:47 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 51 at 15.295541 pixels away [Sat Jun 8 23:35:47 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 23:35:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 23:35:47 2013] Assessing source extent using major [Sat Jun 8 23:35:47 2013] Source does appear to be extended [Sat Jun 8 23:35:47 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 23:36:09 2013] Using EEF radius (= 12.49 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 23:36:09 2013] Initial guess for spatial extent in simple fitting = 12.49" [Sat Jun 8 23:36:09 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.924 [Sat Jun 8 23:36:09 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 12.49" [Sun Jun 9 02:32:00 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src51.ximg exists [Sun Jun 9 02:32:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src51.csv [Sun Jun 9 02:32:00 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src51_1.ximg exists [Sun Jun 9 02:32:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src51.csv [Sun Jun 9 02:32:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src51_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 02:32:02 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src51.ximg exists [Sun Jun 9 02:32:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src51.csv [Sun Jun 9 02:32:02 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists [Sun Jun 9 02:32:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src51.csv [Sun Jun 9 02:32:02 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src51_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 04:04:26 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 51 at 16.547550 pixels away [Sun Jun 9 04:04:26 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 04:04:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 04:04:26 2013] Assessing source extent using major [Sun Jun 9 04:04:26 2013] Source does appear to be extended [Sun Jun 9 04:04:26 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 04:04:50 2013] XMMSAS src. selection expression = ellipse(11694.279068, 28977.498932, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 04:04:50 2013] Writing source region out to fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src51_src.reg [Sun Jun 9 04:04:50 2013] Extracting stamp from image fullrun_pn_xmm0658401001_pi300-10000_cl_sm2.00.img.gz, (97, 296) - (172, 371) [Sun Jun 9 04:04:50 2013] XMMSAS bgd. selection expression = annulus(11694.279068, 28977.498932, 1087.500000, 2175.000000, X, Y) && !ellipse(10531.965000, 27402.929200, 442.786413, 442.786413, 0.000000, X, Y) && !ellipse(8730.279366, 26400.394745, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 9 04:04:50 2013] Writing fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src51.gif [Sun Jun 9 05:02:47 2013] Mean detx,y = (5945.73, -11283.09) [Sun Jun 9 05:02:51 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 05:03:17 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 05:03:17 2013] Setting source spectrum file to fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src51_src_b10.pi.gz [Sun Jun 9 05:03:17 2013] Setting bgd. spectrum file to fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src51_bgd.pi.gz [Sun Jun 9 06:05:19 2013] Not generating rmf since there are only 76 counts [Sun Jun 9 06:05:19 2013] rmf not generated due to insufficient counts [Sun Jun 9 07:49:22 2013] Updating aperture counts using extracted products [Sun Jun 9 07:49:22 2013] Total counts from fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src51_src_b10.pi.gz = 482.00 [Sun Jun 9 07:49:22 2013] Total counts from fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src51_bgd.pi.gz = 2659.00 [Sun Jun 9 07:49:22 2013] Got source and background scale factors 1318749.000000, 10274940.000000 [Sun Jun 9 07:49:22 2013] User source parameters: Position = (135.0, 333.6) = 6 20 49.38 -70 57 55.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 140.7 +/- 23.0 Background aperture counts = 341.3 Rate = 0.003 +/- 0.0005 [Sun Jun 9 07:49:22 2013] Updating counts from extracted products [Sun Jun 9 07:49:22 2013] Set source signif. to 140.73/18.47 = 7.62 [Sun Jun 9 07:49:27 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 07:49:27 2013] Using photon index=1.80, rate=0.00323, arf fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src51.arf [Sun Jun 9 07:49:27 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 07:49:27 2013] Updating source flux to 2.1e-14 [Sun Jun 9 07:49:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 07:49:58 2013] xmm0658401001/analysis//spectral/fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src51_pl.csv not found, spectral fit skipped or did not complete