[Sat Jun 8 19:50:16 2013] Detection parameters: Position = (258.3, 387.0) = 6 18 59.61 -70 54 2.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 163.9 +/- 17.5 Background counts = 75.6 Rate = 0.006 +/- 0.0006 [Sat Jun 8 19:50:17 2013] Off-axis axis estimate = 7.05' [Sat Jun 8 19:53:55 2013] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 19:53:55 2013] Initial guess for spatial extent in simple fitting = 9.95" [Sat Jun 8 19:53:55 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.804 [Sat Jun 8 19:53:55 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 9.95" [Sat Jun 8 22:15:09 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src26.ximg exists [Sat Jun 8 22:15:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src26.csv [Sat Jun 8 22:15:09 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src26_1.ximg exists [Sat Jun 8 22:15:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src26.csv [Sat Jun 8 22:15:09 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 22:15:10 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src26.ximg exists [Sat Jun 8 22:15:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src26.csv [Sat Jun 8 22:15:10 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists [Sat Jun 8 22:15:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src26.csv [Sat Jun 8 22:15:10 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 23:35:47 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 11.964506 pixels away [Sat Jun 8 23:35:47 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 23:35:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 23:35:47 2013] Assessing source extent using major [Sat Jun 8 23:35:47 2013] Source does appear to be extended [Sat Jun 8 23:35:47 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 23:36:09 2013] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 23:36:09 2013] Initial guess for spatial extent in simple fitting = 9.95" [Sat Jun 8 23:36:09 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.804 [Sat Jun 8 23:36:09 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 9.95" [Sun Jun 9 02:32:00 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src26.ximg exists [Sun Jun 9 02:32:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src26.csv [Sun Jun 9 02:32:00 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src26_1.ximg exists [Sun Jun 9 02:32:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src26.csv [Sun Jun 9 02:32:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 02:32:02 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src26.ximg exists [Sun Jun 9 02:32:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src26.csv [Sun Jun 9 02:32:02 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists [Sun Jun 9 02:32:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src26.csv [Sun Jun 9 02:32:02 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 04:04:26 2013] Spatial fit model total counts = 729.731000, observed total counts = 597.000000 [Sun Jun 9 04:04:26 2013] Poor agreement between spatial fit and data for source 26 It may help to tweak spatial fit manually Not incorporating fit results [Sun Jun 9 04:04:26 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 04:04:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 04:04:26 2013] Assessing source extent using major [Sun Jun 9 04:04:26 2013] Source does appear to be extended [Sun Jun 9 04:04:26 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 04:04:50 2013] XMMSAS src. selection expression = ellipse(22422.850220, 33619.337097, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 04:04:50 2013] Writing source region out to fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src26_src.reg [Sun Jun 9 04:04:50 2013] Extracting stamp from image fullrun_pn_xmm0658401001_pi300-10000_cl_sm2.00.img.gz, (221, 349) - (296, 424) [Sun Jun 9 04:04:50 2013] XMMSAS bgd. selection expression = annulus(22422.850220, 33619.337097, 1087.500000, 2175.000000, X, Y) && !ellipse(22763.567474, 35370.836029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24164.090118, 32023.550323, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 9 04:04:50 2013] Writing fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src26.gif [Sun Jun 9 04:34:08 2013] Mean detx,y = (7273.28, 329.40) [Sun Jun 9 04:34:16 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 04:34:53 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 04:34:53 2013] Setting source spectrum file to fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src26_src_b10.pi.gz [Sun Jun 9 04:34:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src26_bgd.pi.gz [Sun Jun 9 05:41:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 9 05:41:07 2013] rmf not generated due to insufficient counts [Sun Jun 9 07:49:17 2013] Updating aperture counts using extracted products [Sun Jun 9 07:49:17 2013] Total counts from fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 446.00 [Sun Jun 9 07:49:17 2013] Total counts from fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src26_bgd.pi.gz = 2208.00 [Sun Jun 9 07:49:17 2013] Got source and background scale factors 1063737.000000, 7266688.000000 [Sun Jun 9 07:49:17 2013] User source parameters: Position = (258.3, 387.0) = 6 18 59.61 -70 54 2.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 122.8 +/- 22.1 Background aperture counts = 323.2 Rate = 0.003 +/- 0.0005 [Sun Jun 9 07:49:17 2013] Updating counts from extracted products [Sun Jun 9 07:49:17 2013] Set source signif. to 122.78/17.98 = 6.83 [Sun Jun 9 07:49:26 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 07:49:26 2013] Using photon index=1.80, rate=0.00281, arf fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src26.arf [Sun Jun 9 07:49:26 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 07:49:26 2013] Updating source flux to 1.2e-14 [Sun Jun 9 07:49:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 07:49:58 2013] xmm0658401001/analysis//spectral/fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete