[Sat Jun 8 19:50:16 2013] Detection parameters: Position = (434.7, 353.1) = 6 16 22.98 -70 56 31.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 157.6 +/- 19.3 Background counts = 64.7 Rate = 0.003 +/- 0.0004 [Sat Jun 8 19:50:17 2013] Off-axis axis estimate = 10.65' [Sat Jun 8 19:53:55 2013] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 19:53:55 2013] Initial guess for spatial extent in simple fitting = 11.75" [Sat Jun 8 19:53:55 2013] source mask rpix=2.7, npix_max = 40, mask sum = 34, frac = 0.829 [Sat Jun 8 19:53:55 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 11.75" [Sat Jun 8 22:15:09 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src15.ximg exists [Sat Jun 8 22:15:09 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src15.csv [Sat Jun 8 22:15:09 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src15_1.ximg exists [Sat Jun 8 22:15:09 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src15.csv [Sat Jun 8 22:15:09 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 22:15:10 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src15.ximg exists [Sat Jun 8 22:15:10 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src15.csv [Sat Jun 8 22:15:10 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists [Sat Jun 8 22:15:10 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src15.csv [Sat Jun 8 22:15:10 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 23:35:47 2013] Warning, spatial fit 15 centroid is now closest to src. 27 [Sat Jun 8 23:35:47 2013] Source 15 is offset by -1.685939 and -1.301261 pixels which is larger than 2 X fitted extent = 1.334676 x 1.334676, not incorporating fit results [Sat Jun 8 23:35:47 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 23:35:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 23:35:47 2013] Assessing source extent using major [Sat Jun 8 23:35:47 2013] Source does appear to be extended [Sat Jun 8 23:35:47 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 23:36:09 2013] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 23:36:09 2013] Initial guess for spatial extent in simple fitting = 11.75" [Sat Jun 8 23:36:09 2013] source mask rpix=2.7, npix_max = 40, mask sum = 34, frac = 0.829 [Sat Jun 8 23:36:09 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 11.75" [Sun Jun 9 02:32:00 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src15.ximg exists [Sun Jun 9 02:32:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src15.csv [Sun Jun 9 02:32:00 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src15_1.ximg exists [Sun Jun 9 02:32:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src15.csv [Sun Jun 9 02:32:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 02:32:01 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src15.ximg exists [Sun Jun 9 02:32:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src15.csv [Sun Jun 9 02:32:01 2013] fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists [Sun Jun 9 02:32:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src15.csv [Sun Jun 9 02:32:01 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 04:04:26 2013] Spatial fit model total counts = 832.653000, observed total counts = 708.000000 [Sun Jun 9 04:04:26 2013] Poor agreement between spatial fit and data for source 15 It may help to tweak spatial fit manually Not incorporating fit results [Sun Jun 9 04:04:26 2013] Source 15 is offset by -1.632123 and -1.309582 pixels which is larger than 2 X fitted extent = 1.316897 x 1.316897, not incorporating fit results [Sun Jun 9 04:04:26 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 04:04:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 04:04:26 2013] Assessing source extent using major [Sun Jun 9 04:04:26 2013] Source does appear to be extended [Sun Jun 9 04:04:26 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 04:04:49 2013] XMMSAS src. selection expression = ellipse(37772.469330, 30670.486328, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 04:04:49 2013] Writing source region out to fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src15_src.reg [Sun Jun 9 04:04:49 2013] Extracting stamp from image fullrun_pn_xmm0658401001_pi300-10000_cl_sm2.00.img.gz, (397, 316) - (472, 391) [Sun Jun 9 04:04:49 2013] XMMSAS bgd. selection expression = annulus(37772.469330, 30670.486328, 1087.500000, 2175.000000, X, Y) && !ellipse(35619.137024, 30049.127167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37080.143890, 30490.337280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35245.928400, 29955.064960, 2068.552060, 390.660011, 341.964500, X, Y) && !ellipse(34507.470040, 29742.624600, 2028.312058, 372.315211, 345.273700, X, Y) && !ellipse(34227.758000, 29655.452600, 1619.280047, 447.108813, -0.000000, X, Y) [Sun Jun 9 04:04:49 2013] Writing fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src15.gif [Sun Jun 9 04:23:43 2013] Mean detx,y = (114.10, 13997.91) [Sun Jun 9 04:23:47 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 04:24:07 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 04:24:07 2013] Setting source spectrum file to fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Sun Jun 9 04:24:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src15_bgd.pi.gz [Sun Jun 9 05:35:53 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 9 05:35:53 2013] rmf not generated due to insufficient counts [Sun Jun 9 07:49:14 2013] Updating aperture counts using extracted products [Sun Jun 9 07:49:14 2013] Total counts from fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 497.00 [Sun Jun 9 07:49:15 2013] Total counts from fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src15_bgd.pi.gz = 1023.00 [Sun Jun 9 07:49:15 2013] Got source and background scale factors 762082.000000, 1893089.000000 [Sun Jun 9 07:49:15 2013] User source parameters: Position = (434.7, 353.1) = 6 16 22.98 -70 56 31.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 85.2 +/- 23.3 Background aperture counts = 411.8 Rate = 0.002 +/- 0.0005 [Sun Jun 9 07:49:15 2013] Updating counts from extracted products [Sun Jun 9 07:49:15 2013] Set source signif. to 85.18/20.29 = 4.20 [Sun Jun 9 07:49:26 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 07:49:26 2013] Using photon index=1.80, rate=0.00195, arf fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src15.arf [Sun Jun 9 07:49:26 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 07:49:26 2013] Updating source flux to 1.6e-14 [Sun Jun 9 07:49:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 07:49:58 2013] xmm0658401001/analysis//spectral/fullrun_pn_xmm0658401001_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete