[Sat Jun  8 19:50:38 2013] Detection parameters:
  Position = (152.2, 453.0) = 6 20 33.07 -70 49 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.7 +/- 11.1
  Background counts = 25.2
  Rate = 0.0009 +/- 0.0002

[Sat Jun  8 19:50:38 2013] Off-axis axis estimate = 15.42'
[Sat Jun  8 22:15:11 2013] Using EEF radius (= 14.14 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 22:15:11 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  8 22:15:11 2013] Initial guess for spatial extent in simple fitting = 14.14"
[Sat Jun  8 22:15:11 2013] source mask rpix=3.3, npix_max = 56, mask sum = 61, frac = 1.084
[Sat Jun  8 22:15:11 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 14.14"
[Sat Jun  8 22:37:39 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src20.ximg exists
[Sat Jun  8 22:37:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src20.csv
[Sat Jun  8 22:37:39 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Jun  8 22:37:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src20.csv
[Sat Jun  8 22:37:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 22:37:39 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Jun  8 22:37:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun  8 22:37:39 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jun  8 22:37:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun  8 22:37:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 23:35:49 2013] Spatial fit model total counts = 354.458000, observed total counts = 267.000000
[Sat Jun  8 23:35:49 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 23:35:49 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 23:35:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 23:35:49 2013] Assessing source extent using major
[Sat Jun  8 23:35:49 2013] Source does appear to be extended
[Sat Jun  8 23:35:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 23:35:49 2013] Deleting source due to low Poisson probability 0.9