[Sat Jun 8 19:50:38 2013] Detection parameters: Position = (284.6, 223.7) = 6 18 36.37 -71 5 56.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 103.8 +/- 13.6 Background counts = 32.4 Rate = 0.004 +/- 0.0005 [Sat Jun 8 19:50:38 2013] Off-axis axis estimate = 5.51' [Sat Jun 8 22:15:11 2013] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 22:15:11 2013] Initial guess for spatial extent in simple fitting = 9.18" [Sat Jun 8 22:15:11 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.917 [Sat Jun 8 22:15:11 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 9.18" [Sat Jun 8 22:37:39 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src5.ximg exists [Sat Jun 8 22:37:39 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src5.csv [Sat Jun 8 22:37:39 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src5_1.ximg exists [Sat Jun 8 22:37:39 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src5.csv [Sat Jun 8 22:37:39 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 22:37:39 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Sat Jun 8 22:37:39 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src5.csv [Sat Jun 8 22:37:39 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Sat Jun 8 22:37:39 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src5.csv [Sat Jun 8 22:37:39 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 23:35:49 2013] Source 19 is offset by 7.202955 and -5.574958 pixels which is larger than 2 X fitted extent = 1.280680 x 1.280680, not incorporating fit results [Sat Jun 8 23:35:49 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 23:35:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 23:35:49 2013] Assessing source extent using major [Sat Jun 8 23:35:49 2013] Source does appear to be extended [Sat Jun 8 23:35:49 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 02:32:02 2013] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 02:32:02 2013] Initial guess for spatial extent in simple fitting = 9.18" [Sun Jun 9 02:32:02 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.917 [Sun Jun 9 02:32:02 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 9.18" [Sun Jun 9 02:55:44 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_src5.ximg exists [Sun Jun 9 02:55:44 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_src5.csv [Sun Jun 9 02:55:44 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_src5_1.ximg exists [Sun Jun 9 02:55:44 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_src5.csv [Sun Jun 9 02:55:44 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 02:55:44 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Sun Jun 9 02:55:44 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src5.csv [Sun Jun 9 02:55:44 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Sun Jun 9 02:55:44 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src5.csv [Sun Jun 9 02:55:44 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 04:04:29 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.298488 pixels away [Sun Jun 9 04:04:29 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 04:04:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 04:04:29 2013] Assessing source extent using major [Sun Jun 9 04:04:29 2013] Source does appear to be extended [Sun Jun 9 04:04:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 06:38:44 2013] XMMSAS src. selection expression = ellipse(24715.529083, 19416.390625, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 06:38:44 2013] Writing source region out to fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src19_src.reg [Sun Jun 9 06:38:44 2013] Extracting stamp from image fullrun_mos1_xmm0658401001_pi300-10000_cl_sm2.00.img.gz, (247, 186) - (322, 261) [Sun Jun 9 06:38:44 2013] XMMSAS bgd. selection expression = annulus(24715.529083, 19416.390625, 1087.500000, 2175.000000, X, Y) [Sun Jun 9 06:38:44 2013] Writing fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src19.gif [Sun Jun 9 06:42:53 2013] Mean detx,y = (1550.76, -7352.20) [Sun Jun 9 06:42:54 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 06:43:13 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 06:43:14 2013] Setting source spectrum file to fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src19_src_b10.pi.gz [Sun Jun 9 06:43:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src19_bgd.pi.gz [Sun Jun 9 06:56:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 9 06:56:35 2013] rmf not generated due to insufficient counts [Sun Jun 9 07:49:27 2013] Updating aperture counts using extracted products [Sun Jun 9 07:49:27 2013] Total counts from fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 187.00 [Sun Jun 9 07:49:27 2013] Total counts from fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src19_bgd.pi.gz = 622.00 [Sun Jun 9 07:49:28 2013] Got source and background scale factors 1013052.000000, 6045613.000000 [Sun Jun 9 07:49:28 2013] User source parameters: Position = (284.6, 223.7) = 6 18 36.37 -71 5 56.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 82.8 +/- 14.7 Background aperture counts = 104.2 Rate = 0.002 +/- 0.0003 [Sun Jun 9 07:49:28 2013] Updating counts from extracted products [Sun Jun 9 07:49:28 2013] Set source signif. to 82.77/10.21 = 8.11 [Sun Jun 9 07:49:29 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 07:49:29 2013] Using photon index=1.80, rate=0.00176, arf fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src19.arf [Sun Jun 9 07:49:29 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 07:49:29 2013] Updating source flux to 2.7e-14 [Sun Jun 9 07:49:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 07:49:40 2013] xmm0658401001/analysis//spectral/fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete