[Sat Jun 8 19:50:38 2013] Detection parameters: Position = (254.5, 268.3) = 6 19 3.25 -71 2 43.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 69.1 +/- 13.8 Background counts = 44.5 Rate = 0.002 +/- 0.0004 [Sat Jun 8 19:50:38 2013] Off-axis axis estimate = 3.86' [Sat Jun 8 22:15:11 2013] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 22:15:11 2013] Initial guess for spatial extent in simple fitting = 8.36" [Sat Jun 8 22:15:11 2013] source mask rpix=1.9, npix_max = 23, mask sum = 24, frac = 1.023 [Sat Jun 8 22:15:11 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 8.36" [Sat Jun 8 22:37:39 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src15.ximg exists [Sat Jun 8 22:37:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src15.csv [Sat Jun 8 22:37:39 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src15_1.ximg exists [Sat Jun 8 22:37:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src15.csv [Sat Jun 8 22:37:39 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src15_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 22:37:39 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src15.ximg exists [Sat Jun 8 22:37:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src15.csv [Sat Jun 8 22:37:39 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists [Sat Jun 8 22:37:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src15.csv [Sat Jun 8 22:37:39 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0658401001_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 23:35:49 2013] Source 16 is offset by -7.067763 and 0.203226 pixels which is larger than 2 X fitted extent = 0.969127 x 0.969127, not incorporating fit results [Sat Jun 8 23:35:49 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 23:35:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 23:35:49 2013] Assessing source extent using major [Sat Jun 8 23:35:49 2013] Source does appear to be extended [Sat Jun 8 23:35:49 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 02:32:02 2013] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 02:32:02 2013] Initial guess for spatial extent in simple fitting = 8.36" [Sun Jun 9 02:32:02 2013] source mask rpix=1.9, npix_max = 23, mask sum = 24, frac = 1.023 [Sun Jun 9 02:32:02 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 8.36" [Sun Jun 9 02:55:44 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_src14.ximg exists [Sun Jun 9 02:55:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_src14.csv [Sun Jun 9 02:55:44 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_src14_1.ximg exists [Sun Jun 9 02:55:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_src14.csv [Sun Jun 9 02:55:44 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_src14_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 02:55:44 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src14.ximg exists [Sun Jun 9 02:55:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src14.csv [Sun Jun 9 02:55:44 2013] fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists [Sun Jun 9 02:55:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src14.csv [Sun Jun 9 02:55:44 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src14_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0658401001_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 04:04:29 2013] Spatial fit model total counts = 438.682000, observed total counts = 293.000000 [Sun Jun 9 04:04:29 2013] Poor agreement between spatial fit and data for source 16 It may help to tweak spatial fit manually Not incorporating fit results [Sun Jun 9 04:04:29 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 04:04:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 04:04:29 2013] Assessing source extent using major [Sun Jun 9 04:04:29 2013] Source does appear to be extended [Sun Jun 9 04:04:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 06:38:44 2013] XMMSAS src. selection expression = ellipse(22093.614639, 23296.633636, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 06:38:44 2013] Writing source region out to fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src16_src.reg [Sun Jun 9 06:38:44 2013] Extracting stamp from image fullrun_mos1_xmm0658401001_pi300-10000_cl_sm2.00.img.gz, (217, 231) - (292, 306) [Sun Jun 9 06:38:44 2013] XMMSAS bgd. selection expression = annulus(22093.614639, 23296.633636, 1087.500000, 2175.000000, X, Y) && !ellipse(24072.068600, 26609.079000, 1312.240838, 1245.084036, 302.961986, X, Y) [Sun Jun 9 06:38:44 2013] Writing fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src16.gif [Sun Jun 9 06:44:58 2013] Mean detx,y = (2907.33, -2748.68) [Sun Jun 9 06:44:59 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 06:45:16 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 06:45:16 2013] Setting source spectrum file to fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src16_src_b10.pi.gz [Sun Jun 9 06:45:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src16_bgd.pi.gz [Sun Jun 9 07:00:46 2013] Not generating rmf since there are only 69 counts [Sun Jun 9 07:00:46 2013] rmf not generated due to insufficient counts [Sun Jun 9 07:49:29 2013] Updating aperture counts using extracted products [Sun Jun 9 07:49:29 2013] Total counts from fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 271.00 [Sun Jun 9 07:49:29 2013] Total counts from fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src16_bgd.pi.gz = 501.00 [Sun Jun 9 07:49:29 2013] Got source and background scale factors 1036204.000000, 3490577.000000 [Sun Jun 9 07:49:29 2013] User source parameters: Position = (254.5, 268.3) = 6 19 3.25 -71 2 43.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 122.3 +/- 17.5 Background aperture counts = 148.7 Rate = 0.003 +/- 0.0004 [Sun Jun 9 07:49:29 2013] Updating counts from extracted products [Sun Jun 9 07:49:29 2013] Set source signif. to 122.27/12.20 = 10.03 [Sun Jun 9 07:49:29 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 07:49:29 2013] Using photon index=1.80, rate=0.0026, arf fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src16.arf [Sun Jun 9 07:49:29 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 07:49:29 2013] Updating source flux to 3.2e-14 [Sun Jun 9 07:49:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 07:49:40 2013] xmm0658401001/analysis//spectral/fullrun_mos1_xmm0658401001_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete