[Tue Jun 19 14:14:00 2012] Detection parameters:
  Position = (213.3, 167.7) = 8 56 36.82 -7 52 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.1 +/- 16.7
  Background counts = 27.0
  Rate = 0.01 +/- 0.002

[Tue Jun 19 14:14:00 2012] Off-axis axis estimate = 11.31'
[Tue Jun 19 14:15:39 2012] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 14:15:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 14:15:39 2012] Initial guess for spatial extent in simple fitting = 12.08"
[Tue Jun 19 14:15:39 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.140
[Tue Jun 19 14:15:39 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.08"
[Tue Jun 19 15:03:43 2012] fullrun_pn_xmm0658201301_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 19 15:03:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658201301_pi300-10000_cl_pass0_src3.csv
[Tue Jun 19 15:03:43 2012] fullrun_pn_xmm0658201301_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 19 15:03:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658201301_pi300-10000_cl_pass0_src3.csv
[Tue Jun 19 15:03:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0658201301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0658201301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 15:03:43 2012] fullrun_pn_xmm0658201301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 19 15:03:43 2012] fullrun_pn_xmm0658201301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 19 15:03:43 2012] Fit fullrun_pn_xmm0658201301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jun 19 16:44:26 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.965743 pixels away
[Tue Jun 19 16:44:26 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 16:44:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 16:44:26 2012] Assessing source extent using major
[Tue Jun 19 16:44:26 2012] Source does appear to be extended
[Tue Jun 19 16:44:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 16:44:41 2012] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 16:44:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 16:44:41 2012] Initial guess for spatial extent in simple fitting = 12.08"
[Tue Jun 19 16:44:41 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.140
[Tue Jun 19 16:44:41 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.08"
[Tue Jun 19 17:26:56 2012] fullrun_pn_xmm0658201301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 19 17:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658201301_pi300-10000_cl_pass1_src3.csv
[Tue Jun 19 17:26:56 2012] fullrun_pn_xmm0658201301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 19 17:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658201301_pi300-10000_cl_pass1_src3.csv
[Tue Jun 19 17:26:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0658201301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0658201301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 17:26:56 2012] fullrun_pn_xmm0658201301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 19 17:26:56 2012] fullrun_pn_xmm0658201301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 19 17:26:56 2012] Fit fullrun_pn_xmm0658201301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jun 19 18:39:37 2012] Spatial fit model total counts = 260.995000, observed total counts = 261.000000
[Tue Jun 19 18:39:37 2012] Offset between fit and detection position for source 3 = 0.145625 pixels
[Tue Jun 19 18:39:37 2012] 260.938000 total counts/ 200.989000 bgd. counts: snr = 4.228592
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.145625 pixels
  Position = (213.1, 167.8) = 8 56 36.86 -7 52 43.7
  Extent = 6.0 (3.9-8.6)", rotation angle = 0
  Source counts = 59.9 +/- 16.2
  Background counts = 201.0
  Rate = 0.007 +/- 0.002
[Tue Jun 19 18:39:37 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:39:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:39:37 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 18:39:37 2012] Source does appear to be extended
[Tue Jun 19 18:39:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 18:40:01 2012] XMMSAS src. selection expression = ellipse(18494.064000, 14547.816400, 358.458610, 358.458610, 0.000000, X, Y)
[Tue Jun 19 18:40:01 2012] Writing source region out to fullrun_pn_xmm0658201301_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 19 18:40:01 2012] Extracting stamp from image fullrun_pn_xmm0658201301_pi300-10000_cl_sm2.00.img.gz, (193, 147) - (234, 188)
[Tue Jun 19 18:40:01 2012] XMMSAS bgd. selection expression = annulus(18494.064000, 14547.816400, 597.431017, 1194.862034, X, Y)
[Tue Jun 19 18:40:01 2012] Writing fullrun_pn_xmm0658201301_pi300-10000_pass1_cl_src3.gif
[Tue Jun 19 18:41:34 2012] Mean detx,y = (-11463.89, 10191.92) 
[Tue Jun 19 18:41:38 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 18:42:01 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 18:42:02 2012] Setting source spectrum file to fullrun_pn_xmm0658201301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 19 18:42:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0658201301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 19 18:57:43 2012] Not generating rmf since there are only 59 counts
[Tue Jun 19 18:57:43 2012] rmf not generated due to insufficient counts
[Tue Jun 19 19:16:25 2012] Updating aperture counts using extracted products
[Tue Jun 19 19:16:25 2012] Error reading totcts from fullrun_pn_xmm0658201301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 19 19:16:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 19:16:25 2012] Using photon index=1.80, rate=0.00709, arf fullrun_pn_xmm0658201301_pi300-10000_pass1_cl_src3.arf
[Tue Jun 19 19:16:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 19:16:25 2012] Updating source flux to 4.1e-13
[Tue Jun 19 19:16:34 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting