[Tue Jun 19 14:14:21 2012] Detection parameters:
  Position = (389.7, 430.2) = 8 55 45.19 -7 33 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.5 +/- 9.8
  Background counts = 7.6
  Rate = 0.007 +/- 0.001

[Tue Jun 19 14:14:22 2012] Off-axis axis estimate = 11.62'
[Tue Jun 19 15:03:44 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 15:03:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 15:03:44 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Tue Jun 19 15:03:44 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.956
[Tue Jun 19 15:03:44 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.24"
[Tue Jun 19 16:01:50 2012] fullrun_mos1_xmm0658201301_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun 19 16:01:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658201301_pi300-10000_cl_pass0_src2.csv
[Tue Jun 19 16:01:50 2012] fullrun_mos1_xmm0658201301_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun 19 16:01:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658201301_pi300-10000_cl_pass0_src2.csv
[Tue Jun 19 16:01:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0658201301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0658201301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 16:01:50 2012] fullrun_mos1_xmm0658201301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun 19 16:01:50 2012] fullrun_mos1_xmm0658201301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun 19 16:01:50 2012] Fit fullrun_mos1_xmm0658201301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jun 19 16:44:30 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.510701 pixels away
[Tue Jun 19 16:44:30 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 16:44:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 16:44:30 2012] Assessing source extent using major
[Tue Jun 19 16:44:30 2012] Source does appear to be extended
[Tue Jun 19 16:44:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 17:26:56 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 17:26:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 17:26:56 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Tue Jun 19 17:26:56 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.956
[Tue Jun 19 17:26:56 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 12.24"
[Tue Jun 19 18:01:54 2012] fullrun_mos1_xmm0658201301_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jun 19 18:01:54 2012] fullrun_mos1_xmm0658201301_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jun 19 18:01:54 2012] Fit fullrun_mos1_xmm0658201301_pi300-10000_cl_pass1_src2 appears to have run properly
[Tue Jun 19 18:01:54 2012] fullrun_mos1_xmm0658201301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jun 19 18:01:54 2012] fullrun_mos1_xmm0658201301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jun 19 18:01:54 2012] Fit fullrun_mos1_xmm0658201301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jun 19 18:39:43 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.511385 pixels away
[Tue Jun 19 18:39:43 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:39:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:39:43 2012] Assessing source extent using major
[Tue Jun 19 18:39:43 2012] Source does appear to be extended
[Tue Jun 19 18:39:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 19:00:33 2012] XMMSAS src. selection expression = ellipse(33856.402008, 37375.842468, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 19 19:00:33 2012] Writing source region out to fullrun_mos1_xmm0658201301_pi300-10000_pass1_cl_src5_src.reg
[Tue Jun 19 19:00:33 2012] Extracting stamp from image fullrun_mos1_xmm0658201301_pi300-10000_cl_sm2.00.img.gz, (352, 393) - (427, 468)
[Tue Jun 19 19:00:33 2012] XMMSAS bgd. selection expression = annulus(33856.402008, 37375.842468, 1087.500000, 2175.000000, X, Y) && !ellipse(33928.613495, 40028.227356, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 19 19:00:33 2012] Writing fullrun_mos1_xmm0658201301_pi300-10000_pass1_cl_src5.gif
[Tue Jun 19 19:00:45 2012] Mean detx,y = (7248.21, 9522.57) 
[Tue Jun 19 19:00:46 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 19:00:54 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 19:00:54 2012] Setting source spectrum file to fullrun_mos1_xmm0658201301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jun 19 19:00:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0658201301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Jun 19 19:08:49 2012] Not generating rmf since there are only 55 counts
[Tue Jun 19 19:08:49 2012] rmf not generated due to insufficient counts
[Tue Jun 19 19:16:25 2012] Updating aperture counts using extracted products
[Tue Jun 19 19:16:25 2012] Error reading totcts from fullrun_mos1_xmm0658201301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jun 19 19:16:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 19:16:25 2012] Using photon index=1.80, rate=0.00702, arf fullrun_mos1_xmm0658201301_pi300-10000_pass1_cl_src5.arf
[Tue Jun 19 19:16:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 19:16:25 2012] Updating source flux to 1.1e-13
[Tue Jun 19 19:16:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting