[Mon Jun 10 00:55:55 2013] Detection parameters:
  Position = (258.7, 352.1) = 0 40 49.60 -11 40 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21.8 +/- 6.0
  Background counts = 4.6
  Rate = 0.003 +/- 0.0007

[Mon Jun 10 00:55:55 2013] Off-axis axis estimate = 4.84'
[Mon Jun 10 01:32:23 2013] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 01:32:23 2013] Initial guess for spatial extent in simple fitting = 8.85"
[Mon Jun 10 01:32:23 2013] source mask rpix=2.0, npix_max = 25, mask sum = 16, frac = 0.623
[Mon Jun 10 01:32:23 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.85"
[Mon Jun 10 01:49:25 2013] fullrun_mos1_xmm0658200601_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jun 10 01:49:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658200601_pi300-10000_cl_pass0_src5.csv
[Mon Jun 10 01:49:25 2013] fullrun_mos1_xmm0658200601_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jun 10 01:49:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658200601_pi300-10000_cl_pass0_src5.csv
[Mon Jun 10 01:49:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0658200601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0658200601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 01:49:25 2013] fullrun_mos1_xmm0658200601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jun 10 01:49:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658200601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Jun 10 01:49:25 2013] fullrun_mos1_xmm0658200601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jun 10 01:49:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658200601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Jun 10 01:49:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0658200601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0658200601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 02:20:31 2013] Spatial fit model total counts = 80.227800, observed total counts = 49.000000
[Mon Jun 10 02:20:31 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 02:20:31 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 02:20:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 02:20:31 2013] Assessing source extent using major
[Mon Jun 10 02:20:31 2013] Source does appear to be extended
[Mon Jun 10 02:20:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 02:20:31 2013] Deleting source due to low Poisson probability 0.9