[Wed Jun 20 15:59:41 2012] Detection parameters:
  Position = (414.2, 315.5) = 3 35 20.02 -6 57 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.2 +/- 10.3
  Background counts = 19.1
  Rate = 0.007 +/- 0.001

[Wed Jun 20 15:59:41 2012] Off-axis axis estimate = 8.48'
[Wed Jun 20 16:01:17 2012] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 16:01:17 2012] Initial guess for spatial extent in simple fitting = 10.67"
[Wed Jun 20 16:01:17 2012] source mask rpix=2.5, npix_max = 34, mask sum = 30, frac = 0.860
[Wed Jun 20 16:01:17 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 10.67"
[Wed Jun 20 17:05:17 2012] fullrun_pn_xmm0658200401_pi300-10000_cl_pass0_src17.ximg exists
[Wed Jun 20 17:05:17 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0658200401_pi300-10000_cl_pass0_src17.csv
[Wed Jun 20 17:05:17 2012] fullrun_pn_xmm0658200401_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Jun 20 17:05:17 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0658200401_pi300-10000_cl_pass0_src17.csv
[Wed Jun 20 17:05:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0658200401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0658200401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 17:05:18 2012] fullrun_pn_xmm0658200401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Jun 20 17:05:18 2012] fullrun_pn_xmm0658200401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Jun 20 17:05:18 2012] Fit fullrun_pn_xmm0658200401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Jun 20 18:19:19 2012] Spatial fit model total counts = 192.191000, observed total counts = 175.000000
[Wed Jun 20 18:19:19 2012] Offset between fit and detection position for source 17 = 0.314190 pixels
[Wed Jun 20 18:19:19 2012] 193.446100 total counts/ 156.399000 bgd. counts: snr = 2.962356
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.314190 pixels
  Position = (413.9, 315.7) = 3 35 20.08 -6 57 38.5
  Extent = 7.1 (2.7-12.9)", rotation angle = 0
  Source counts = 37.0 +/- 13.9
  Background counts = 156.4
  Rate = 0.003 +/- 0.001
[Wed Jun 20 18:19:19 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 18:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 18:19:19 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 18:19:19 2012] Source does appear to be extended
[Wed Jun 20 18:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 18:19:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 20 18:19:34 2012] Initial guess for spatial extent in simple fitting = 7.10"
[Wed Jun 20 18:19:34 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.879
[Wed Jun 20 18:19:34 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.10"
[Wed Jun 20 19:03:19 2012] fullrun_pn_xmm0658200401_pi300-10000_cl_pass1_src17.ximg exists
[Wed Jun 20 19:03:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658200401_pi300-10000_cl_pass1_src17.csv
[Wed Jun 20 19:03:19 2012] fullrun_pn_xmm0658200401_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Jun 20 19:03:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658200401_pi300-10000_cl_pass1_src17.csv
[Wed Jun 20 19:03:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0658200401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0658200401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 19:03:19 2012] fullrun_pn_xmm0658200401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Jun 20 19:03:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658200401_pi300-10000_cl_pass1_tfrozen_src17.csv
[Wed Jun 20 19:03:19 2012] fullrun_pn_xmm0658200401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Jun 20 19:03:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0658200401_pi300-10000_cl_pass1_tfrozen_src17.csv
[Wed Jun 20 19:03:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0658200401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0658200401_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 20:13:26 2012] Warning, spatial fit 17 centroid is now closest to src. 28
[Wed Jun 20 20:13:26 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 20:13:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 20:13:26 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 20:13:26 2012] Source does appear to be extended
[Wed Jun 20 20:13:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 20:13:39 2012] XMMSAS src. selection expression = ellipse(35964.717740, 27421.562600, 426.285612, 426.285612, 0.000000, X, Y)
[Wed Jun 20 20:13:39 2012] Writing source region out to fullrun_pn_xmm0658200401_pi300-10000_pass1_cl_src17_src.reg
[Wed Jun 20 20:13:39 2012] Extracting stamp from image fullrun_pn_xmm0658200401_pi300-10000_cl_sm2.00.img.gz, (389, 291) - (438, 340)
[Wed Jun 20 20:13:39 2012] XMMSAS bgd. selection expression = annulus(35964.717740, 27421.562600, 710.476020, 1420.952041, X, Y) && !ellipse(36003.340800, 28604.020400, 607.597617, 607.597617, 0.000000, X, Y)
[Wed Jun 20 20:13:39 2012] Writing fullrun_pn_xmm0658200401_pi300-10000_pass1_cl_src17.gif
[Wed Jun 20 20:21:06 2012] Mean detx,y = (8001.00, -3073.21) 
[Wed Jun 20 20:21:09 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 20:21:26 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 20:21:26 2012] Setting source spectrum file to fullrun_pn_xmm0658200401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jun 20 20:21:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0658200401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Jun 20 20:36:33 2012] Not generating rmf since there are only 37 counts
[Wed Jun 20 20:36:33 2012] rmf not generated due to insufficient counts
[Wed Jun 20 21:51:08 2012] Updating aperture counts using extracted products
[Wed Jun 20 21:51:08 2012] Error reading totcts from fullrun_pn_xmm0658200401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jun 20 21:51:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 21:51:09 2012] Using photon index=1.80, rate=0.00345, arf fullrun_pn_xmm0658200401_pi300-10000_pass1_cl_src17.arf
[Wed Jun 20 21:51:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 21:51:09 2012] Updating source flux to 1.3e-14
[Wed Jun 20 21:51:48 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting