[Wed Jun 20 16:00:23 2012] Detection parameters:
  Position = (415.1, 328.4) = 3 35 19.74 -6 56 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.9 +/- 10.5
  Background counts = 7.5
  Rate = 0.006 +/- 0.001

[Wed Jun 20 16:00:23 2012] Off-axis axis estimate = 8.73'
[Wed Jun 20 17:46:33 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 17:46:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 17:46:33 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Wed Jun 20 17:46:33 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.012
[Wed Jun 20 17:46:33 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.80"
[Wed Jun 20 18:19:13 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jun 20 18:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_src3.csv
[Wed Jun 20 18:19:13 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jun 20 18:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_src3.csv
[Wed Jun 20 18:19:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 18:19:13 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jun 20 18:19:13 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jun 20 18:19:13 2012] Fit fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jun 20 18:19:26 2012] Spatial fit model total counts = 168.658000, observed total counts = 168.000000
[Wed Jun 20 18:19:26 2012] Offset between fit and detection position for source 6 = 0.101053 pixels
[Wed Jun 20 18:19:26 2012] 168.209500 total counts/ 132.973000 bgd. counts: snr = 3.055702
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.101053 pixels
  Position = (415.0, 328.4) = 3 35 19.77 -6 56 43.4
  Extent = 4.2 (3.1-6.3)", rotation angle = 0
  Source counts = 35.2 +/- 13.0
  Background counts = 133.0
  Rate = 0.002 +/- 0.0008
[Wed Jun 20 18:19:26 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 18:19:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 18:19:26 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 18:19:26 2012] Source does appear to be extended
[Wed Jun 20 18:19:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 19:43:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 20 19:43:09 2012] Initial guess for spatial extent in simple fitting = 4.24"
[Wed Jun 20 19:43:09 2012] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.690
[Wed Jun 20 19:43:09 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.24"
[Wed Jun 20 20:13:19 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jun 20 20:13:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_src3.csv
[Wed Jun 20 20:13:19 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jun 20 20:13:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_src3.csv
[Wed Jun 20 20:13:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 20:13:19 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jun 20 20:13:19 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jun 20 20:13:19 2012] Fit fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jun 20 20:13:32 2012] Spatial fit model total counts = 168.654000, observed total counts = 168.000000
[Wed Jun 20 20:13:32 2012] Offset between fit and detection position for source 6 = 0.010945 pixels
[Wed Jun 20 20:13:32 2012] 168.299500 total counts/ 133.467000 bgd. counts: snr = 3.015072
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.010945 pixels
  Position = (415.0, 328.4) = 3 35 19.77 -6 56 43.4
  Extent = 4.2 (3.1-6.4)", rotation angle = 0
  Source counts = 34.8 +/- 13.0
  Background counts = 133.5
  Rate = 0.002 +/- 0.0008
[Wed Jun 20 20:13:32 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 20:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 20:13:32 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 20:13:32 2012] Source does appear to be extended
[Wed Jun 20 20:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 21:41:35 2012] XMMSAS src. selection expression = ellipse(36058.850300, 28523.269600, 249.603607, 249.603607, 0.000000, X, Y)
[Wed Jun 20 21:41:35 2012] Writing source region out to fullrun_mos2_xmm0658200401_pi300-10000_pass1_cl_src6_src.reg
[Wed Jun 20 21:41:35 2012] Extracting stamp from image fullrun_mos2_xmm0658200401_pi300-10000_cl_sm2.00.img.gz, (401, 314) - (429, 343)
[Wed Jun 20 21:41:35 2012] XMMSAS bgd. selection expression = annulus(36058.850300, 28523.269600, 416.006012, 832.012024, X, Y)
[Wed Jun 20 21:41:35 2012] Writing fullrun_mos2_xmm0658200401_pi300-10000_pass1_cl_src6.gif
[Wed Jun 20 21:42:15 2012] Mean detx,y = (-7582.18, 4071.96) 
[Wed Jun 20 21:42:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 21:42:23 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 21:42:23 2012] Setting source spectrum file to fullrun_mos2_xmm0658200401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jun 20 21:42:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0658200401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Jun 20 21:49:47 2012] Not generating rmf since there are only 34 counts
[Wed Jun 20 21:49:47 2012] rmf not generated due to insufficient counts
[Wed Jun 20 21:51:09 2012] Updating aperture counts using extracted products
[Wed Jun 20 21:51:09 2012] Error reading totcts from fullrun_mos2_xmm0658200401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jun 20 21:51:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 21:51:10 2012] Using photon index=1.80, rate=0.00218, arf fullrun_mos2_xmm0658200401_pi300-10000_pass1_cl_src6.arf
[Wed Jun 20 21:51:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 21:51:10 2012] Updating source flux to 4.9e-14
[Wed Jun 20 21:51:40 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting