[Wed Jun 20 16:00:23 2012] Detection parameters:
  Position = (272.2, 157.9) = 3 36 1.51 -7 9 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.0 +/- 9.6
  Background counts = 7.6
  Rate = 0.003 +/- 0.0006

[Wed Jun 20 16:00:23 2012] Off-axis axis estimate = 10.37'
[Wed Jun 20 17:46:33 2012] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 17:46:33 2012] Initial guess for spatial extent in simple fitting = 11.61"
[Wed Jun 20 17:46:33 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.896
[Wed Jun 20 17:46:33 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 11.61"
[Wed Jun 20 18:19:13 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_src12.ximg exists
[Wed Jun 20 18:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_src12.csv
[Wed Jun 20 18:19:13 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Jun 20 18:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_src12.csv
[Wed Jun 20 18:19:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 18:19:14 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Jun 20 18:19:14 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Jun 20 18:19:14 2012] Fit fullrun_mos2_xmm0658200401_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Wed Jun 20 18:19:26 2012] Spatial fit model total counts = 110.859000, observed total counts = 105.000000
[Wed Jun 20 18:19:26 2012] Offset between fit and detection position for source 3 = 0.330799 pixels
[Wed Jun 20 18:19:26 2012] 110.851300 total counts/ 65.177700 bgd. counts: snr = 5.657385
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.330799 pixels
  Position = (271.9, 158.0) = 3 36 1.60 -7 9 4.8
  Extent = 8.0 (5.5-11.8)", rotation angle = 0
  Source counts = 45.7 +/- 10.5
  Background counts = 65.2
  Rate = 0.003 +/- 0.0007
[Wed Jun 20 18:19:26 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 18:19:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 18:19:26 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 18:19:26 2012] Source does appear to be extended
[Wed Jun 20 18:19:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 19:43:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 20 19:43:09 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Wed Jun 20 19:43:09 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.731
[Wed Jun 20 19:43:09 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 8.00"
[Wed Jun 20 20:13:19 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_src12.ximg exists
[Wed Jun 20 20:13:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_src12.csv
[Wed Jun 20 20:13:19 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed Jun 20 20:13:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_src12.csv
[Wed Jun 20 20:13:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 20:13:20 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed Jun 20 20:13:20 2012] fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Jun 20 20:13:20 2012] Fit fullrun_mos2_xmm0658200401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Jun 20 20:13:32 2012] Spatial fit model total counts = 108.630000, observed total counts = 104.000000
[Wed Jun 20 20:13:32 2012] Offset between fit and detection position for source 3 = 0.101801 pixels
[Wed Jun 20 20:13:32 2012] 110.289800 total counts/ 63.564500 bgd. counts: snr = 5.860636
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.101801 pixels
  Position = (271.8, 157.9) = 3 36 1.61 -7 9 5.2
  Extent = 8.2 (5.5-13.5)", rotation angle = 0
  Source counts = 46.7 +/- 10.5
  Background counts = 63.6
  Rate = 0.003 +/- 0.0007
[Wed Jun 20 20:13:32 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 20:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 20:13:32 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 20:13:32 2012] Source does appear to be extended
[Wed Jun 20 20:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 21:41:35 2012] XMMSAS src. selection expression = ellipse(23598.368740, 13690.299800, 492.978014, 492.978014, 0.000000, X, Y)
[Wed Jun 20 21:41:35 2012] Writing source region out to fullrun_mos2_xmm0658200401_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun 20 21:41:35 2012] Extracting stamp from image fullrun_mos2_xmm0658200401_pi300-10000_cl_sm2.00.img.gz, (243, 130) - (300, 186)
[Wed Jun 20 21:41:35 2012] XMMSAS bgd. selection expression = annulus(23598.368740, 13690.299800, 821.630024, 1643.260047, X, Y)
[Wed Jun 20 21:41:35 2012] Writing fullrun_mos2_xmm0658200401_pi300-10000_pass1_cl_src3.gif
[Wed Jun 20 21:44:46 2012] Mean detx,y = (-537.84, -13967.85) 
[Wed Jun 20 21:44:47 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 21:45:04 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 21:45:04 2012] Setting source spectrum file to fullrun_mos2_xmm0658200401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 20 21:45:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0658200401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun 20 21:50:28 2012] Not generating rmf since there are only 46 counts
[Wed Jun 20 21:50:28 2012] rmf not generated due to insufficient counts
[Wed Jun 20 21:51:09 2012] Updating aperture counts using extracted products
[Wed Jun 20 21:51:09 2012] Error reading totcts from fullrun_mos2_xmm0658200401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 20 21:51:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 21:51:10 2012] Using photon index=1.80, rate=0.00293, arf fullrun_mos2_xmm0658200401_pi300-10000_pass1_cl_src3.arf
[Wed Jun 20 21:51:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 21:51:10 2012] Updating source flux to 7e-14
[Wed Jun 20 21:51:40 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting