[Wed Jun 20 16:00:02 2012] Detection parameters:
  Position = (290.6, 316.1) = 3 35 56.12 -6 57 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.9 +/- 9.8
  Background counts = 10.7
  Rate = 0.003 +/- 0.0007

[Wed Jun 20 16:00:03 2012] Off-axis axis estimate = 1.40'
[Wed Jun 20 17:05:18 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 17:05:18 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Wed Jun 20 17:05:18 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.093
[Wed Jun 20 17:05:18 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.13"
[Wed Jun 20 17:46:33 2012] fullrun_mos1_xmm0658200401_pi300-10000_cl_pass0_src14.ximg exists
[Wed Jun 20 17:46:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658200401_pi300-10000_cl_pass0_src14.csv
[Wed Jun 20 17:46:33 2012] fullrun_mos1_xmm0658200401_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Jun 20 17:46:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0658200401_pi300-10000_cl_pass0_src14.csv
[Wed Jun 20 17:46:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0658200401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0658200401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 17:46:33 2012] fullrun_mos1_xmm0658200401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Jun 20 17:46:33 2012] fullrun_mos1_xmm0658200401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Jun 20 17:46:33 2012] Fit fullrun_mos1_xmm0658200401_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Jun 20 18:19:23 2012] Spatial fit model total counts = 243.859000, observed total counts = 244.000000
[Wed Jun 20 18:19:23 2012] Offset between fit and detection position for source 10 = 3.928630 pixels
[Wed Jun 20 18:19:23 2012] Warning, changing simple spatial fit ID from 14 to 7
[Wed Jun 20 18:19:23 2012] 247.357000 total counts/ 113.297000 bgd. counts: snr = 12.594763
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 3.928630 pixels
  Position = (287.8, 318.9) = 3 35 56.93 -6 57 25.1
  Extent = 20.6" x 20.6", rotation angle = 138
  Source counts = 134.1 +/- 15.7
  Background counts = 113.3
  Rate = 0.008 +/- 0.001
[Wed Jun 20 18:19:23 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 18:19:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 18:19:23 2012] Assessing source extent using major
[Wed Jun 20 18:19:23 2012] Source does appear to be extended
[Wed Jun 20 18:19:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 18:19:23 2012] Source is confused with source 9
[Wed Jun 20 19:03:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 20 19:03:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 19:03:19 2012] Initial guess for spatial extent in simple fitting = 20.64"
[Wed Jun 20 19:03:19 2012] source mask rpix=4.7, npix_max = 109, mask sum = 100, frac = 0.909
[Wed Jun 20 19:03:19 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 20.64"
[Wed Jun 20 19:43:09 2012] fullrun_mos1_xmm0658200401_pi300-10000_cl_pass1_src13.ximg exists
[Wed Jun 20 19:43:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0658200401_pi300-10000_cl_pass1_src13.csv
[Wed Jun 20 19:43:09 2012] fullrun_mos1_xmm0658200401_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Jun 20 19:43:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0658200401_pi300-10000_cl_pass1_src13.csv
[Wed Jun 20 19:43:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0658200401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0658200401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 19:43:09 2012] fullrun_mos1_xmm0658200401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Jun 20 19:43:09 2012] fullrun_mos1_xmm0658200401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Jun 20 19:43:09 2012] Fit fullrun_mos1_xmm0658200401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Jun 20 20:13:29 2012] Warning, spatial fit 13 centroid is now closest to src. 13
[Wed Jun 20 20:13:29 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 20:13:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 20:13:29 2012] Assessing source extent using major
[Wed Jun 20 20:13:29 2012] Source does appear to be extended
[Wed Jun 20 20:13:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 20:38:23 2012] XMMSAS src. selection expression = ellipse(24993.322198, 27692.242589, 1238.394036, 1237.976338, 138.288568, X, Y)
[Wed Jun 20 20:38:23 2012] Writing source region out to fullrun_mos1_xmm0658200401_pi300-10000_pass1_cl_src10_src.reg
[Wed Jun 20 20:38:23 2012] Extracting stamp from image fullrun_mos1_xmm0658200401_pi300-10000_cl_sm2.00.img.gz, (217, 248) - (359, 390)
[Wed Jun 20 20:38:23 2012] XMMSAS bgd. selection expression = annulus(24993.322198, 27692.242589, 2063.990059, 4127.980119, X, Y) && !ellipse(25499.826200, 26183.983200, 420.492812, 420.492812, 0.000000, X, Y) && !ellipse(24891.817719, 28104.312897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22342.318200, 23949.838600, 300.873609, 300.873609, 0.000000, X, Y) && !ellipse(27300.227800, 26133.367000, 1086.920031, 1086.920031, 0.000000, X, Y) && !ellipse(24907.022000, 27344.216000, 1142.392033, 1142.392033, 0.000000, X, Y) && !ellipse(25656.162000, 26850.670000, 3294.184095, 3294.184095, 0.000000, X, Y)
[Wed Jun 20 20:38:23 2012] Writing fullrun_mos1_xmm0658200401_pi300-10000_pass1_cl_src10.gif
[Wed Jun 20 20:41:01 2012] Mean detx,y = (-58.93, -2694.99) 
[Wed Jun 20 20:41:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 20:41:22 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 20:41:22 2012] Setting source spectrum file to fullrun_mos1_xmm0658200401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jun 20 20:41:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0658200401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jun 20 21:51:09 2012] Updating aperture counts using extracted products
[Wed Jun 20 21:51:09 2012] Error reading totcts from fullrun_mos1_xmm0658200401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jun 20 21:51:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 21:51:09 2012] Using photon index=1.80, rate=0.0084, arf fullrun_mos1_xmm0658200401_pi300-10000_pass1_cl_src10.arf
[Wed Jun 20 21:51:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 21:51:09 2012] Updating source flux to 8e-14
[Wed Jun 20 21:51:11 2012] Flag c found in src. 10 procflags, skipping spectral fitting
[Wed Jun 20 21:51:40 2012] Reading fit data from xmm0658200401/analysis//spectral/fullrun_mos1_xmm0658200401_pi300-10000_pass1_cl_src10_pl.csv
[Wed Jun 20 21:51:40 2012] Spectral fit parameter nH value = 5.72638e+20
[Wed Jun 20 21:51:40 2012] Spectral fit parameter PhoIndex value = 1.83875
[Wed Jun 20 21:51:40 2012] Failed to get F(0.3-8.0) from xmm0658200401/analysis//spectral/fullrun_mos1_xmm0658200401_pi300-10000_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Wed Jun 20 21:51:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 21:51:40 2012] Using Nh = 5.7e+20, photon index=1.84, rate=0.0084, arf fullrun_mos1_xmm0658200401_pi300-10000_pass1_cl_src10.arf
[Wed Jun 20 21:51:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 21:51:40 2012] Updating source flux to 8.3e-14