[Wed Jul  4 16:15:49 2012] Detection parameters:
  Position = (341.9, 300.1) = 6 15 51.77 -57 46 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 656.5 +/- 31.4
  Background counts = 10.1
  Rate = 0.05 +/- 0.002

[Wed Jul  4 16:15:50 2012] Off-axis axis estimate = 3.15'
[Wed Jul  4 16:56:11 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 16:56:11 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Wed Jul  4 16:56:11 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.730
[Wed Jul  4 16:56:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.00"
[Wed Jul  4 17:15:04 2012] fullrun_mos2_xmm0658200101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul  4 17:15:04 2012] fullrun_mos2_xmm0658200101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul  4 17:15:04 2012] Fit fullrun_mos2_xmm0658200101_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed Jul  4 17:15:04 2012] fullrun_mos2_xmm0658200101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul  4 17:15:04 2012] fullrun_mos2_xmm0658200101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul  4 17:15:04 2012] Fit fullrun_mos2_xmm0658200101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul  4 17:15:12 2012] Spatial fit model total counts = 1305.880000, observed total counts = 1303.000000
[Wed Jul  4 17:15:12 2012] Offset between fit and detection position for source 5 = 0.685360 pixels
[Wed Jul  4 17:15:12 2012] 1315.250000 total counts/ 497.040000 bgd. counts: snr = 36.700258
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.685360 pixels
  Position = (341.6, 300.8) = 6 15 51.92 -57 46 49.4
  Extent = 13.9" x 10.6", rotation angle = 65
  Source counts = 818.2 +/- 36.3
  Background counts = 497.0
  Rate = 0.06 +/- 0.003
[Wed Jul  4 17:15:12 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 17:15:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 17:15:12 2012] Assessing source extent using major
[Wed Jul  4 17:15:12 2012] Source does appear to be extended
[Wed Jul  4 17:15:12 2012] Computing asymmetry using major and minor axis, asym = 1.31
[Wed Jul  4 17:45:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul  4 17:45:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul  4 17:45:39 2012] Initial guess for spatial extent in simple fitting = 12.26"
[Wed Jul  4 17:45:39 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.112
[Wed Jul  4 17:45:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.26"
[Wed Jul  4 18:04:32 2012] fullrun_mos2_xmm0658200101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul  4 18:04:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658200101_pi300-10000_cl_pass1_src1.csv
[Wed Jul  4 18:04:32 2012] fullrun_mos2_xmm0658200101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul  4 18:04:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0658200101_pi300-10000_cl_pass1_src1.csv
[Wed Jul  4 18:04:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0658200101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0658200101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 18:04:32 2012] fullrun_mos2_xmm0658200101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul  4 18:04:32 2012] fullrun_mos2_xmm0658200101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul  4 18:04:32 2012] Fit fullrun_mos2_xmm0658200101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul  4 18:04:39 2012] Spatial fit model total counts = 1626.160000, observed total counts = 1614.000000
[Wed Jul  4 18:04:39 2012] Offset between fit and detection position for source 5 = 0.262613 pixels
[Wed Jul  4 18:04:39 2012] 1629.393000 total counts/ 550.583000 bgd. counts: snr = 45.976252
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.262613 pixels
  Position = (341.6, 301.0) = 6 15 51.92 -57 46 48.3
  Extent = 14.7 (13.7-15.9)", rotation angle = 0
  Source counts = 1078.8 +/- 40.4
  Background counts = 550.6
  Rate = 0.08 +/- 0.003
[Wed Jul  4 18:04:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 18:04:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 18:04:39 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 18:04:39 2012] Source does appear to be extended
[Wed Jul  4 18:04:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 18:31:51 2012] Counts = 1078.810000, rescaling region sizes by 2.000000
[Wed Jul  4 18:31:51 2012] XMMSAS src. selection expression = ellipse(29671.403040, 26141.381600, 1766.988051, 1766.988051, 0.000000, X, Y)
[Wed Jul  4 18:31:51 2012] Writing source region out to fullrun_mos2_xmm0658200101_pi300-10000_pass1_cl_src5_src.reg
[Wed Jul  4 18:31:51 2012] Extracting stamp from image fullrun_mos2_xmm0658200101_pi300-10000_cl_sm2.00.img.gz, (240, 199) - (443, 403)
[Wed Jul  4 18:31:51 2012] XMMSAS bgd. selection expression = annulus(29671.403040, 26141.381600, 5889.960169, 11779.920339, X, Y) && !ellipse(31758.809387, 31931.330536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32245.429440, 30004.543600, 388.211211, 388.211211, 0.000000, X, Y) && !ellipse(25280.416180, 22901.655180, 347.625610, 347.625610, 0.000000, X, Y) && !ellipse(22013.959600, 20917.575400, 521.667215, 521.667215, 0.000000, X, Y) && !ellipse(35015.501000, 24405.204200, 991.104029, 991.104029, 0.000000, X, Y) && !ellipse(30447.475000, 31779.312800, 518.943215, 518.943215, 0.000000, X, Y) && !ellipse(30399.096220, 22678.471200, 269.908808, 269.908808, 0.000000, X, Y) && !ellipse(29580.229000, 22618.503000, 305.316809, 305.316809, 0.000000, X, Y) && !ellipse(34330.210571, 22503.669312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24679.725592, 31688.244538, 571.070416, 278.827963, 337.636456, X, Y) && !ellipse(37517.613800, 25982.392600, 465.483213, 465.483213, 0.000000, X, Y) && !ellipse(29210.907383, 18456.609790, 780.566422, 304.455022, 346.993135, X, Y) && !ellipse(38778.236600, 14057.924400, 385.610411, 385.610411, 0.000000, X, Y) && !ellipse(26162.686400, 36786.919000, 549.252816, 452.364813, 351.206904, X, Y)
[Wed Jul  4 18:31:51 2012] Writing fullrun_mos2_xmm0658200101_pi300-10000_pass1_cl_src5.gif
[Wed Jul  4 18:31:53 2012] Mean detx,y = (-1624.58, 890.11) 
[Wed Jul  4 18:31:54 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 18:35:04 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 18:35:04 2012] Setting source spectrum file to fullrun_mos2_xmm0658200101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jul  4 18:35:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0658200101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jul  4 19:09:29 2012] Updating aperture counts using extracted products
[Wed Jul  4 19:09:29 2012] Error reading totcts from fullrun_mos2_xmm0658200101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jul  4 19:09:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 19:09:29 2012] Using photon index=1.80, rate=0.0775, arf fullrun_mos2_xmm0658200101_pi300-10000_pass1_cl_src5.arf
[Wed Jul  4 19:09:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 19:09:29 2012] Updating source flux to 6.8e-13
[Wed Jul  4 19:09:53 2012] Reading fit data from xmm0658200101/analysis//spectral/fullrun_mos2_xmm0658200101_pi300-10000_pass1_cl_src5_pl.csv
[Wed Jul  4 19:09:53 2012] Spectral fit parameter nH value = 8.77655e+20
[Wed Jul  4 19:09:53 2012] Spectral fit parameter PhoIndex value = 1.77999
[Wed Jul  4 19:09:53 2012] Failed to get F(0.3-8.0) from xmm0658200101/analysis//spectral/fullrun_mos2_xmm0658200101_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Wed Jul  4 19:09:53 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 19:09:53 2012] Using Nh = 8.8e+20, photon index=1.78, rate=0.0775, arf fullrun_mos2_xmm0658200101_pi300-10000_pass1_cl_src5.arf
[Wed Jul  4 19:09:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 19:09:53 2012] Updating source flux to 7.5e-13