[Fri Feb 17 10:11:08 2012] Detection parameters:
  Position = (140.7, 305.0) = 1 20 11.98 -34 11 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.1 +/- 13.0
  Background counts = 4.3
  Rate = 0.008 +/- 0.0009

[Fri Feb 17 10:11:09 2012] Off-axis axis estimate = 11.45'
[Fri Feb 17 10:59:30 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 10:59:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 10:59:30 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Fri Feb 17 10:59:30 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.968
[Fri Feb 17 10:59:30 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.15"
[Fri Feb 17 11:19:42 2012] fullrun_mos2_xmm0657820101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Feb 17 11:19:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657820101_pi300-10000_cl_pass0_src3.csv
[Fri Feb 17 11:19:42 2012] fullrun_mos2_xmm0657820101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Feb 17 11:19:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657820101_pi300-10000_cl_pass0_src3.csv
[Fri Feb 17 11:19:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0657820101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0657820101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 11:19:42 2012] fullrun_mos2_xmm0657820101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Feb 17 11:19:42 2012] fullrun_mos2_xmm0657820101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Feb 17 11:19:42 2012] Fit fullrun_mos2_xmm0657820101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Feb 17 11:19:51 2012] Spatial fit model total counts = 143.078000, observed total counts = 144.000000
[Fri Feb 17 11:19:51 2012] Offset between fit and detection position for source 3 = 0.234793 pixels
[Fri Feb 17 11:19:51 2012] 144.403000 total counts/ 67.166500 bgd. counts: snr = 9.424238
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.234793 pixels
  Position = (140.9, 304.9) = 1 20 11.91 -34 11 23.8
  Extent = 6.1 (4.5-8.0)", rotation angle = 0
  Source counts = 77.2 +/- 12.0
  Background counts = 67.2
  Rate = 0.005 +/- 0.0008
[Fri Feb 17 11:19:51 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 11:19:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 11:19:51 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 11:19:51 2012] Source does appear to be extended
[Fri Feb 17 11:19:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 11:56:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 11:56:54 2012] Initial guess for spatial extent in simple fitting = 6.14"
[Fri Feb 17 11:56:54 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.096
[Fri Feb 17 11:56:54 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.14"
[Fri Feb 17 12:17:01 2012] fullrun_mos2_xmm0657820101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Feb 17 12:17:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657820101_pi300-10000_cl_pass1_src3.csv
[Fri Feb 17 12:17:01 2012] fullrun_mos2_xmm0657820101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Feb 17 12:17:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657820101_pi300-10000_cl_pass1_src3.csv
[Fri Feb 17 12:17:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0657820101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0657820101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 12:17:02 2012] fullrun_mos2_xmm0657820101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Feb 17 12:17:02 2012] fullrun_mos2_xmm0657820101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Feb 17 12:17:02 2012] Fit fullrun_mos2_xmm0657820101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Feb 17 12:17:10 2012] Spatial fit model total counts = 139.701000, observed total counts = 140.000000
[Fri Feb 17 12:17:10 2012] Offset between fit and detection position for source 3 = 0.066063 pixels
[Fri Feb 17 12:17:10 2012] 140.641300 total counts/ 66.958100 bgd. counts: snr = 9.004652
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.066063 pixels
  Position = (140.8, 304.9) = 1 20 11.93 -34 11 23.7
  Extent = 5.7 (4.4-7.8)", rotation angle = 0
  Source counts = 73.7 +/- 11.9
  Background counts = 67.0
  Rate = 0.005 +/- 0.0008
[Fri Feb 17 12:17:10 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 12:17:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 12:17:10 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 12:17:10 2012] Source does appear to be extended
[Fri Feb 17 12:17:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 12:47:47 2012] XMMSAS src. selection expression = ellipse(12204.560080, 26480.538800, 341.731210, 341.731210, 0.000000, X, Y)
[Fri Feb 17 12:47:47 2012] Writing source region out to fullrun_mos2_xmm0657820101_pi300-10000_pass1_cl_src3_src.reg
[Fri Feb 17 12:47:47 2012] Extracting stamp from image fullrun_mos2_xmm0657820101_pi300-10000_cl_sm2.00.img.gz, (121, 285) - (160, 325)
[Fri Feb 17 12:47:47 2012] XMMSAS bgd. selection expression = annulus(12204.560080, 26480.538800, 569.552016, 1139.104033, X, Y)
[Fri Feb 17 12:47:47 2012] Writing fullrun_mos2_xmm0657820101_pi300-10000_pass1_cl_src3.gif
[Fri Feb 17 12:48:08 2012] Mean detx,y = (11528.15, -10661.12) 
[Fri Feb 17 12:48:09 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 12:48:16 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 12:48:16 2012] Setting source spectrum file to fullrun_mos2_xmm0657820101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Feb 17 12:48:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0657820101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Feb 17 12:57:38 2012] Not generating rmf since there are only 73 counts
[Fri Feb 17 12:57:38 2012] rmf not generated due to insufficient counts
[Fri Feb 17 12:58:50 2012] Updating aperture counts using extracted products
[Fri Feb 17 12:58:50 2012] Error reading totcts from fullrun_mos2_xmm0657820101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Feb 17 12:58:50 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 12:58:50 2012] Using photon index=1.80, rate=0.00506, arf fullrun_mos2_xmm0657820101_pi300-10000_pass1_cl_src3.arf
[Fri Feb 17 12:58:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 12:58:50 2012] Updating source flux to 2e-13
[Sun Feb 19 22:38:01 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting