[Fri Feb 17 10:10:47 2012] Detection parameters:
  Position = (383.9, 323.7) = 1 18 46.74 -34 10 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.7 +/- 9.3
  Background counts = 5.6
  Rate = 0.004 +/- 0.0008

[Fri Feb 17 10:10:47 2012] Off-axis axis estimate = 6.46'
[Fri Feb 17 10:46:26 2012] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 10:46:26 2012] Initial guess for spatial extent in simple fitting = 9.66"
[Fri Feb 17 10:46:26 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.014
[Fri Feb 17 10:46:26 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.66"
[Fri Feb 17 10:59:30 2012] fullrun_mos1_xmm0657820101_pi300-10000_cl_pass0_src5.ximg exists
[Fri Feb 17 10:59:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657820101_pi300-10000_cl_pass0_src5.csv
[Fri Feb 17 10:59:30 2012] fullrun_mos1_xmm0657820101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Feb 17 10:59:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657820101_pi300-10000_cl_pass0_src5.csv
[Fri Feb 17 10:59:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657820101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657820101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 10:59:30 2012] fullrun_mos1_xmm0657820101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Feb 17 10:59:30 2012] fullrun_mos1_xmm0657820101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Feb 17 10:59:30 2012] Fit fullrun_mos1_xmm0657820101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Feb 17 11:19:49 2012] Spatial fit model total counts = 103.759000, observed total counts = 103.000000
[Fri Feb 17 11:19:49 2012] Offset between fit and detection position for source 7 = 0.144696 pixels
[Fri Feb 17 11:19:49 2012] 103.998700 total counts/ 73.827000 bgd. counts: snr = 3.511496
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.144696 pixels
  Position = (383.7, 323.7) = 1 18 46.79 -34 10 2.6
  Extent = 4.3 (3.0-5.8)", rotation angle = 0
  Source counts = 30.2 +/- 10.2
  Background counts = 73.8
  Rate = 0.002 +/- 0.0007
[Fri Feb 17 11:19:49 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 11:19:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 11:19:49 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 11:19:49 2012] Source does appear to be extended
[Fri Feb 17 11:19:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 11:46:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 11:46:51 2012] Initial guess for spatial extent in simple fitting = 4.29"
[Fri Feb 17 11:46:51 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.018
[Fri Feb 17 11:46:51 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 4.29"
[Fri Feb 17 11:56:54 2012] fullrun_mos1_xmm0657820101_pi300-10000_cl_pass1_src5.ximg exists
[Fri Feb 17 11:56:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657820101_pi300-10000_cl_pass1_src5.csv
[Fri Feb 17 11:56:54 2012] fullrun_mos1_xmm0657820101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Feb 17 11:56:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0657820101_pi300-10000_cl_pass1_src5.csv
[Fri Feb 17 11:56:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0657820101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0657820101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 11:56:54 2012] fullrun_mos1_xmm0657820101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Feb 17 11:56:54 2012] fullrun_mos1_xmm0657820101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Feb 17 11:56:54 2012] Fit fullrun_mos1_xmm0657820101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Feb 17 12:17:08 2012] Spatial fit model total counts = 105.182000, observed total counts = 105.000000
[Fri Feb 17 12:17:08 2012] Offset between fit and detection position for source 7 = 0.017125 pixels
[Fri Feb 17 12:17:08 2012] 106.204200 total counts/ 76.935700 bgd. counts: snr = 3.336849
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.017125 pixels
  Position = (383.7, 323.7) = 1 18 46.79 -34 10 2.7
  Extent = 4.1 (3.1-5.6)", rotation angle = 0
  Source counts = 29.3 +/- 10.3
  Background counts = 76.9
  Rate = 0.002 +/- 0.0007
[Fri Feb 17 12:17:08 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 12:17:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 12:17:08 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 12:17:08 2012] Source does appear to be extended
[Fri Feb 17 12:17:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 12:38:57 2012] XMMSAS src. selection expression = ellipse(33335.785000, 28110.954000, 247.957807, 247.957807, 0.000000, X, Y)
[Fri Feb 17 12:38:57 2012] Writing source region out to fullrun_mos1_xmm0657820101_pi300-10000_pass1_cl_src7_src.reg
[Fri Feb 17 12:38:57 2012] Extracting stamp from image fullrun_mos1_xmm0657820101_pi300-10000_cl_sm2.00.img.gz, (369, 309) - (398, 338)
[Fri Feb 17 12:38:57 2012] XMMSAS bgd. selection expression = annulus(33335.785000, 28110.954000, 413.263012, 826.526024, X, Y)
[Fri Feb 17 12:38:57 2012] Writing fullrun_mos1_xmm0657820101_pi300-10000_pass1_cl_src7.gif
[Fri Feb 17 12:39:43 2012] Mean detx,y = (5283.27, 2539.84) 
[Fri Feb 17 12:39:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 12:39:50 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 12:39:50 2012] Setting source spectrum file to fullrun_mos1_xmm0657820101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Feb 17 12:39:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0657820101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Feb 17 12:47:38 2012] Not generating rmf since there are only 29 counts
[Fri Feb 17 12:47:38 2012] rmf not generated due to insufficient counts
[Fri Feb 17 12:58:50 2012] Updating aperture counts using extracted products
[Fri Feb 17 12:58:50 2012] Error reading totcts from fullrun_mos1_xmm0657820101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Feb 17 12:58:50 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 12:58:50 2012] Using photon index=1.80, rate=0.00201, arf fullrun_mos1_xmm0657820101_pi300-10000_pass1_cl_src7.arf
[Fri Feb 17 12:58:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 12:58:50 2012] Updating source flux to 3.2e-14
[Fri Feb 17 12:58:51 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting