[Thu Jun  6 15:34:48 2013] Detection parameters:
  Position = (300.9, 268.5) = 9 55 55.88 69 40 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1994.7 +/- 56.0
  Background counts = 49.0
  Rate = 0.1 +/- 0.003

[Thu Jun  6 15:34:49 2013] Off-axis axis estimate = 2.18'
[Thu Jun  6 18:56:48 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 18:56:48 2013] Initial guess for spatial extent in simple fitting = 7.52"
[Thu Jun  6 18:56:48 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.007
[Thu Jun  6 18:56:48 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.52"
[Thu Jun  6 20:23:07 2013] fullrun_mos2_xmm0657802101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun  6 20:23:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657802101_pi300-10000_cl_pass0_src3.csv
[Thu Jun  6 20:23:07 2013] fullrun_mos2_xmm0657802101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun  6 20:23:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657802101_pi300-10000_cl_pass0_src3.csv
[Thu Jun  6 20:23:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0657802101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0657802101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 20:23:08 2013] fullrun_mos2_xmm0657802101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun  6 20:23:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657802101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun  6 20:23:08 2013] fullrun_mos2_xmm0657802101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun  6 20:23:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657802101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun  6 20:23:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0657802101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0657802101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 20:23:30 2013] Spatial fit model total counts = 6113.700000, observed total counts = 11177.000000
[Thu Jun  6 20:23:30 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 20:23:30 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 20:23:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 20:23:30 2013] Assessing source extent using major
[Thu Jun  6 20:23:30 2013] Source does appear to be extended
[Thu Jun  6 20:23:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 23:15:56 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 23:15:56 2013] Initial guess for spatial extent in simple fitting = 7.52"
[Thu Jun  6 23:15:56 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.007
[Thu Jun  6 23:15:56 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.52"
[Fri Jun  7 00:10:33 2013] fullrun_mos2_xmm0657802101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun  7 00:10:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657802101_pi300-10000_cl_pass1_src3.csv
[Fri Jun  7 00:10:33 2013] fullrun_mos2_xmm0657802101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun  7 00:10:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657802101_pi300-10000_cl_pass1_src3.csv
[Fri Jun  7 00:10:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0657802101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0657802101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 00:10:34 2013] fullrun_mos2_xmm0657802101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun  7 00:10:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657802101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun  7 00:10:34 2013] fullrun_mos2_xmm0657802101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun  7 00:10:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0657802101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun  7 00:10:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0657802101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0657802101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 00:10:51 2013] Spatial fit model total counts = 13843.000000, observed total counts = 11177.000000
[Fri Jun  7 00:10:51 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 00:10:51 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 00:10:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 00:10:51 2013] Assessing source extent using major
[Fri Jun  7 00:10:51 2013] Source does appear to be extended
[Fri Jun  7 00:10:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 02:53:51 2013] Counts = 1994.745117, rescaling region sizes by 2.000000
[Fri Jun  7 02:53:51 2013] XMMSAS src. selection expression = ellipse(26133.009399, 23308.002472, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun  7 02:53:51 2013] Writing source region out to fullrun_mos2_xmm0657802101_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun  7 02:53:51 2013] Extracting stamp from image fullrun_mos2_xmm0657802101_pi300-10000_cl_sm2.00.img.gz, (226, 193) - (376, 343)
[Fri Jun  7 02:53:51 2013] XMMSAS bgd. selection expression = annulus(26133.009399, 23308.002472, 4350.000000, 8700.000000, X, Y) && !ellipse(26659.865688, 24055.012000, 637.473618, 426.397612, 25.007700, X, Y) && !ellipse(26963.430878, 24507.273895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25570.228149, 24695.658844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27225.216000, 22313.150000, 1241.848036, 1241.848036, 0.000000, X, Y) && !ellipse(30410.896149, 32294.636780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19398.263412, 16371.468948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27866.547058, 23832.527405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19585.331467, 21806.927231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29111.110626, 22436.494415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27965.144400, 27937.902000, 1232.848035, 1232.848035, 0.000000, X, Y) && !ellipse(24161.654000, 23776.427000, 1223.136035, 1223.136035, 0.000000, X, Y)
[Fri Jun  7 02:53:51 2013] Writing fullrun_mos2_xmm0657802101_pi300-10000_pass1_cl_src2.gif
[Fri Jun  7 02:59:33 2013] Mean detx,y = (-334.18, 75.21) 
[Fri Jun  7 02:59:36 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 03:03:53 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 03:03:53 2013] Setting source spectrum file to fullrun_mos2_xmm0657802101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  7 03:03:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0657802101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun  7 03:17:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun  7 03:17:28 2013] rmf not generated due to insufficient counts
[Fri Jun  7 03:54:54 2013] Updating aperture counts using extracted products
[Fri Jun  7 03:54:55 2013] Total counts from fullrun_mos2_xmm0657802101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 28123.00
[Fri Jun  7 03:54:55 2013] Total counts from fullrun_mos2_xmm0657802101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 12048.00
[Fri Jun  7 03:54:55 2013] Got source and background scale factors 4745844.000000, 157765440.000000
[Fri Jun  7 03:54:55 2013] User source parameters:
  Position = (300.9, 268.5) = 9 55 55.88 69 40 11.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 27760.6 +/- 168.7
  Background aperture counts = 362.4
  Rate = 2 +/- 0.009

[Fri Jun  7 03:54:55 2013] Updating counts from extracted products
[Fri Jun  7 03:54:55 2013] Set source signif. to 27760.58/19.04 = 1458.21
[Fri Jun  7 03:54:57 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 03:54:57 2013] Using photon index=1.80, rate=1.52, arf fullrun_mos2_xmm0657802101_pi300-10000_pass1_cl_src2.arf
[Fri Jun  7 03:54:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 03:54:57 2013] Updating source flux to 1.5e-11
[Fri Jun  7 03:55:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun  7 03:55:12 2013] xmm0657802101/analysis//spectral/fullrun_mos2_xmm0657802101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete