[Sun Jun 10 00:53:45 2012] Detection parameters:
  Position = (373.1, 299.8) = 9 55 49.93 69 5 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 722.4 +/- 35.7
  Background counts = 76.4
  Rate = 0.06 +/- 0.003

[Sun Jun 10 00:53:48 2012] Off-axis axis estimate = 5.41'
[Sun Jun 10 00:59:24 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 00:59:24 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Sun Jun 10 00:59:24 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.110
[Sun Jun 10 00:59:24 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.13"
[Sun Jun 10 05:00:16 2012] fullrun_pn_xmm0657801801_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 10 05:00:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0657801801_pi300-10000_cl_pass0_src5.csv
[Sun Jun 10 05:00:16 2012] fullrun_pn_xmm0657801801_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 10 05:00:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0657801801_pi300-10000_cl_pass0_src5.csv
[Sun Jun 10 05:00:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 05:00:17 2012] fullrun_pn_xmm0657801801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 10 05:00:17 2012] fullrun_pn_xmm0657801801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 10 05:00:17 2012] Fit fullrun_pn_xmm0657801801_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Jun 10 07:37:09 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.731836 pixels away
[Sun Jun 10 07:37:09 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 07:37:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 07:37:09 2012] Assessing source extent using major
[Sun Jun 10 07:37:09 2012] Source does appear to be extended
[Sun Jun 10 07:37:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 07:37:09 2012] Source is confused with source 28
[Sun Jun 10 07:37:09 2012] Source is confused with source 29
[Sun Jun 10 07:37:30 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 07:37:30 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Sun Jun 10 07:37:30 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.110
[Sun Jun 10 07:37:30 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.13"
[Sun Jun 10 12:23:12 2012] fullrun_pn_xmm0657801801_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 10 12:23:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0657801801_pi300-10000_cl_pass1_src5.csv
[Sun Jun 10 12:23:12 2012] fullrun_pn_xmm0657801801_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 10 12:23:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0657801801_pi300-10000_cl_pass1_src5.csv
[Sun Jun 10 12:23:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801801_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 12:23:13 2012] fullrun_pn_xmm0657801801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 10 12:23:13 2012] fullrun_pn_xmm0657801801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 10 12:23:13 2012] Fit fullrun_pn_xmm0657801801_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Jun 10 14:18:32 2012] Spatial fit model total counts = 1222.610000, observed total counts = 1221.000000
[Sun Jun 10 14:18:32 2012] Offset between fit and detection position for source 5 = 0.223643 pixels
[Sun Jun 10 14:18:32 2012] 1190.475000 total counts/ 856.688000 bgd. counts: snr = 11.404023
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.223643 pixels
  Position = (372.9, 299.6) = 9 55 50.08 69 5 31.9
  Extent = 5.0 (4.5-5.6)", rotation angle = 0
  Source counts = 333.8 +/- 34.5
  Background counts = 856.7
  Rate = 0.03 +/- 0.003
[Sun Jun 10 14:18:32 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 14:18:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 14:18:32 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 14:18:32 2012] Source does appear to be extended
[Sun Jun 10 14:18:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 14:19:06 2012] XMMSAS src. selection expression = ellipse(32393.960460, 26019.057000, 302.898009, 302.898009, 0.000000, X, Y)
[Sun Jun 10 14:19:06 2012] Writing source region out to fullrun_pn_xmm0657801801_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun 10 14:19:06 2012] Extracting stamp from image fullrun_pn_xmm0657801801_pi300-10000_cl_sm2.00.img.gz, (355, 282) - (390, 317)
[Sun Jun 10 14:19:07 2012] XMMSAS bgd. selection expression = annulus(32393.960460, 26019.057000, 504.830015, 1009.660029, X, Y) && !ellipse(34188.107400, 24085.936000, 1443.564042, 1443.564042, 0.000000, X, Y) && !ellipse(30441.028000, 26620.702000, 1369.120039, 1369.120039, 0.000000, X, Y) && !ellipse(31013.444427, 26240.105316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34108.645721, 25925.951630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31735.774000, 25701.942000, 1401.632040, 1401.632040, 0.000000, X, Y) && !ellipse(32270.765411, 25447.884399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33765.700000, 24436.860000, 1508.128043, 1508.128043, 0.000000, X, Y) && !ellipse(31565.034000, 24908.254000, 319.208009, 319.208009, 0.000000, X, Y)
[Sun Jun 10 14:19:07 2012] Writing fullrun_pn_xmm0657801801_pi300-10000_pass1_cl_src5.gif
[Sun Jun 10 14:33:54 2012] Mean detx,y = (-4770.37, -3825.77) 
[Sun Jun 10 14:33:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 14:34:14 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 14:34:15 2012] Setting source spectrum file to fullrun_pn_xmm0657801801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 10 14:34:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0657801801_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 10 18:05:58 2012] Updating aperture counts using extracted products
[Sun Jun 10 18:05:58 2012] Error reading totcts from fullrun_pn_xmm0657801801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 10 18:05:59 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 18:05:59 2012] Using photon index=1.80, rate=0.0298, arf fullrun_pn_xmm0657801801_pi300-10000_pass1_cl_src5.arf
[Sun Jun 10 18:05:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 18:05:59 2012] Updating source flux to 1.3e-13
[Sun Jun 10 18:08:06 2012] Flag c found in src. 5 procflags, skipping spectral fitting