[Sat Jun 15 15:50:31 2013] Detection parameters:
  Position = (293.8, 321.8) = 9 55 50.92 69 40 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.2 +/- 16.9
  Background counts = 10.6
  Rate = 0.02 +/- 0.002

[Sat Jun 15 15:50:31 2013] Off-axis axis estimate = 1.73'
[Sat Jun 15 15:56:26 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 15:56:26 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun 15 15:56:26 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Jun 15 15:56:26 2013] Giving source the simple spatial ID 86 for pass 0, mean size = 7.29"
[Sat Jun 15 21:25:03 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src86.ximg exists
[Sat Jun 15 21:25:03 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:03 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src86_1.ximg exists
[Sat Jun 15 21:25:03 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:25:06 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Sat Jun 15 21:25:06 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:06 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Sat Jun 15 21:25:06 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 23:44:48 2013] Source 87 is offset by 5.030599 and -7.931473 pixels which is larger than
2 X fitted extent = 0.838060 x 0.838060, not incorporating fit results
[Sat Jun 15 23:44:48 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 23:44:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 23:44:48 2013] Assessing source extent using major
[Sat Jun 15 23:44:48 2013] Source does appear to be extended
[Sat Jun 15 23:44:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 23:45:23 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 23:45:23 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun 15 23:45:23 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Jun 15 23:45:23 2013] Giving source the simple spatial ID 86 for pass 1, mean size = 7.29"
[Sun Jun 16 08:22:30 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src86.ximg exists
[Sun Jun 16 08:22:30 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:30 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src86_1.ximg exists
[Sun Jun 16 08:22:30 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 08:22:34 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src86.ximg exists
[Sun Jun 16 08:22:34 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:34 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src86_1.ximg exists
[Sun Jun 16 08:22:34 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 11:02:55 2013] Source 87 is offset by -4.613677 and 5.477493 pixels which is larger than
2 X fitted extent = 0.838060 x 0.838060, not incorporating fit results
[Sun Jun 16 11:02:55 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 11:02:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 11:02:55 2013] Assessing source extent using major
[Sun Jun 16 11:02:55 2013] Source does appear to be extended
[Sun Jun 16 11:02:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 11:03:43 2013] XMMSAS src. selection expression = ellipse(25511.066132, 27945.751892, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 11:03:43 2013] Writing source region out to fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src87_src.reg
[Sun Jun 16 11:03:43 2013] Extracting stamp from image fullrun_pn_xmm0657801701_pi300-10000_cl_sm2.00.img.gz, (256, 284) - (331, 359)
[Sun Jun 16 11:03:43 2013] XMMSAS bgd. selection expression = annulus(25511.066132, 27945.751892, 1087.500000, 2175.000000, X, Y) && !ellipse(23846.981384, 26082.680664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23075.315704, 26290.569458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22808.997681, 25756.820953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23757.512207, 25449.947357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23659.292053, 24945.932526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24165.494629, 25001.576630, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 11:03:43 2013] Writing fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src87.gif
[Sun Jun 16 12:02:45 2013] Mean detx,y = (nan, nan) 
[Sun Jun 16 12:02:50 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 12:03:29 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 12:03:29 2013] Setting source spectrum file to fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Sun Jun 16 12:03:29 2013] Setting bgd. spectrum file to fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Sun Jun 16 12:23:05 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 12:23:05 2013] rmf not generated due to insufficient counts
[Sun Jun 16 14:20:39 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:20:39 2013] Total counts from fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src87_src_b10.pi.gz = 0.00
[Sun Jun 16 14:20:39 2013] Total counts from fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src87_bgd.pi.gz = 0.00
[Sun Jun 16 14:20:40 2013] Got source and background scale factors 1345600.000000, 9676007.000000
[Sun Jun 16 14:20:40 2013] User source parameters:
  Position = (293.8, 321.8) = 9 55 50.92 69 40 43.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 0.0 +/- 1.9
  Background aperture counts = 0.0
  Rate = 0 +/- 0.02

[Sun Jun 16 14:20:40 2013] Updating counts from extracted products
[Sun Jun 16 14:20:43 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:20:43 2013] Using photon index=1.80, rate=0, arf fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src87.arf
[Sun Jun 16 14:20:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:20:43 2013] Updated flux is not positive, keeping original flux
[Sun Jun 16 14:21:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 14:21:11 2013] xmm0657801701/analysis//spectral/fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src87_pl.csv not found, spectral fit skipped or did not complete