[Sat Jun 15 15:50:31 2013] Detection parameters:
  Position = (368.5, 171.4) = 9 54 49.01 69 29 48.0
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 29.8 +/- 9.4
  Background counts = 96.5
  Rate = 0.003 +/- 0.0008

[Sat Jun 15 15:50:31 2013] Off-axis axis estimate = 10.52'
[Sat Jun 15 15:56:26 2013] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 15:56:26 2013] Initial guess for spatial extent in simple fitting = 11.69"
[Sat Jun 15 15:56:26 2013] source mask rpix=2.7, npix_max = 40, mask sum = 29, frac = 0.714
[Sat Jun 15 15:56:26 2013] Giving source the simple spatial ID 85 for pass 0, mean size = 11.69"
[Sat Jun 15 21:25:03 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src85.ximg exists
[Sat Jun 15 21:25:03 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:03 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src85_1.ximg exists
[Sat Jun 15 21:25:03 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:25:06 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Sat Jun 15 21:25:06 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:06 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Sat Jun 15 21:25:06 2013] Warning: total counts is not > 0
[Sat Jun 15 21:25:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass0_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 23:44:48 2013] Warning: source 85 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 86 at 12.816563 pixels away
[Sat Jun 15 23:44:48 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 23:44:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 23:44:48 2013] Assessing source extent using major
[Sat Jun 15 23:44:48 2013] Source does appear to be extended
[Sat Jun 15 23:44:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 23:44:48 2013] Source is confused with source 25
[Sat Jun 15 23:45:23 2013] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 23:45:23 2013] Initial guess for spatial extent in simple fitting = 11.69"
[Sat Jun 15 23:45:23 2013] source mask rpix=2.7, npix_max = 40, mask sum = 29, frac = 0.714
[Sat Jun 15 23:45:23 2013] Giving source the simple spatial ID 85 for pass 1, mean size = 11.69"
[Sun Jun 16 08:22:30 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src85.ximg exists
[Sun Jun 16 08:22:30 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:30 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src85_1.ximg exists
[Sun Jun 16 08:22:30 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 08:22:33 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Sun Jun 16 08:22:34 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:34 2013] fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Sun Jun 16 08:22:34 2013] Warning: total counts is not > 0
[Sun Jun 16 08:22:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0657801701_pi300-10000_cl_pass1_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 11:02:55 2013] Warning: source 85 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 86 at 11.949804 pixels away
[Sun Jun 16 11:02:55 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 11:02:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 11:02:55 2013] Assessing source extent using major
[Sun Jun 16 11:02:55 2013] Source does appear to be extended
[Sun Jun 16 11:02:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 11:03:43 2013] XMMSAS src. selection expression = ellipse(32012.932861, 14860.583374, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 16 11:03:43 2013] Writing source region out to fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src86_src.reg
[Sun Jun 16 11:03:43 2013] Extracting stamp from image fullrun_pn_xmm0657801701_pi300-10000_cl_sm2.00.img.gz, (294, 96) - (444, 246)
[Sun Jun 16 11:03:43 2013] XMMSAS bgd. selection expression = annulus(32012.932861, 14860.583374, 2175.000000, 4350.000000, X, Y) && !ellipse(32729.934143, 15429.520309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32296.715668, 15798.222900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28460.200989, 20049.791672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29534.388672, 19280.972183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28830.354553, 19126.222473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29908.697357, 19096.602966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30374.814301, 18496.085785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28903.120941, 17810.383316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30730.723633, 17693.354935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32400.280396, 16473.078247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31614.375793, 17106.808517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30797.141846, 17196.363983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27958.089813, 19163.679626, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sun Jun 16 11:03:43 2013] Writing fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src86.gif
[Sun Jun 16 12:01:31 2013] Mean detx,y = (nan, nan) 
[Sun Jun 16 12:01:35 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 12:02:38 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 12:02:39 2013] Setting source spectrum file to fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Sun Jun 16 12:02:39 2013] Setting bgd. spectrum file to fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Sun Jun 16 12:22:52 2013] Not generating rmf since there are only 29 counts
[Sun Jun 16 12:22:52 2013] rmf not generated due to insufficient counts
[Sun Jun 16 14:20:39 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:20:39 2013] Total counts from fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src86_src_b10.pi.gz = 0.00
[Sun Jun 16 14:20:39 2013] Total counts from fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src86_bgd.pi.gz = 3.00
[Sun Jun 16 14:20:39 2013] Got source and background scale factors 3101697.000000, 15101076.000000
[Sun Jun 16 14:20:39 2013] User source parameters:
  Position = (368.5, 171.4) = 9 54 49.01 69 29 48.0
  Extent = 21.7" x 21.7", rotation angle = 0
  Source aperture counts = -0.6 +/- 1.9
  Background aperture counts = 0.6
  Rate = -0.008 +/- 0.02

[Sun Jun 16 14:20:39 2013] Updating counts from extracted products
[Sun Jun 16 14:20:39 2013] Set source signif. to -0.62/0.78 = -0.78
[Sun Jun 16 14:20:43 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:20:43 2013] Using photon index=1.80, rate=-0.00812, arf fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src86.arf
[Sun Jun 16 14:20:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:20:43 2013] Updated flux is not positive, keeping original flux
[Sun Jun 16 14:21:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 14:21:11 2013] xmm0657801701/analysis//spectral/fullrun_pn_xmm0657801701_pi300-10000_pass1_cl_src86_pl.csv not found, spectral fit skipped or did not complete